• Korean Journal of Biological Psychiatry
• /
• v.9 no.2
• /
• pp.140-151
• /
• 2002

Object and Method:Minor physical anomalies(MPAs) are frequently seen in patients with schizophrenia. MPAs are considered to arise from the anomalous development of ectoderm-originated tissues in the developing fetus. Since the central nervous system originates from ectoderm, MPAs can be regarded as externally observable and objective indicators of the aberrant development which might have taken place in the central nervous system. To investigate whether MPAs are more frequent in schizophrenic patients, the frequencies of MPAs were compared between schizophrenic patients and normal controls. Total 245 schizophrenic patients diagnosed with DSM-IV(male : 158, female : 87), and 418 normal control subjects(male : 216, female : 202) were included in this study. The MPAs were measured using the modified Waldrop scale with fifteen items in six bodily regions; head, eye, ear, mouth, hand, and foot. Result:The total scores of Waldrop scale were $4.40{\pm}1.93$($mean{\pm}standard$ deviation) in patients and $3.43{\pm}1.68$ in controls for females, and for males, $4.58{\pm}1.75$ in patients and $4.28{\pm}1.59$ in controls. For females, the excess of MPAs in schizophrenic patients was statistically significant(t-test : p<0.001). For males, schizophrenic patients also showed more MPAs than normal controls, but this tendency did not reach statistical significance (t-test : p=0.094). When the modified Waldrop total scores excluding head circumference were compared, the total scores in schizophrenic patients were significantly higher for both male and female subjects(t-test : male p<0.001, female p=0.001). The individual anomaly items included in Waldrop scale were also investigated. The items of epicanthus, hypertelorism, malformed ears, syndactylia were significantly more frequent in schizophrenic patients. In contrast, the items of adherent ear lobes, asymmetric ears, furrowed tongue, curved fifth finger, single palmar crease and big gap between toes did not show any differences in frequency between schizophrenic patients and normal controls. Since a lot of statistical analyses showed different results between male and female subjects, it seems to be necessary to consider gender as an important controlling variable for the analysis, however only the item of head circumference showed statistically significant gender-related difference according to log-linear analysis. Conclusion:With a relatively large sample size, the frequencies of MPAs enlisted in Waldrop scale were compared between schizophrenic patients and normal controls in this study. MPAs were more frequently seen in schizophrenic patients and, especially, several specific items in the Waldrop scale showed prominent excess in schizophrenic patients. Although definite conclusions cannot be drawn due to the inherent limitation of the study using Waldrop scale, these results seem to support the possibility that aberrant neurodevelopmental process might be involved in the pathogenesis of schizophrenia in some of the patients.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.42-61
• /
• 2020

Even though research on heritage interpretation has been conducted steadily since the mid-20th century, the actual concept of such interpretation has not been clear. In The ICOMOS Charter for the Interpretation and Presentation of Cultural Heritage Sites, which is a leading international standard of heritage management, the definition of heritage interpretation is still vague. Also, defining its concept is tricky because it is based on the 'situation,' which could change at any moment. Therefore it seems that previous research has focused only on the social function of heritage interpretation. Since socio-philosophy research has become increasingly crucial in heritage studies, the concept of heritage interpretation needs to be precise. Therefore, this paper looks at research history chronologically, divides its social role into two different branches, and finally reifies the definition of the concept. Two social values of heritage interpretation can be distinguished as 'modern heritage interpretation,' and 'inclusive interpretation.' Modern heritage interpretation directs studies into conveying heritage's value to the public as measured by a few experts. It is an educational and communicative role. Inclusive heritage interpretation focuses on seeking comprehensive recognition of diverse values and finds ways to promote reconciliation among multiple stakeholders of heritage. Even though these two functions have developed in different social backgrounds, it is apparent that both have been generated in an unclear, overlapping, and complicated context. The concept of heritage interpretation is too complex to simplify as 'interpretation' itself. This paper defines such interpretation as 'all activities involved in the process of value creation of heritage.' Two social values relate to the concept of 'interpretation': they all have a common recognition of fundamental characteristics of heritage. This is used to establish a collective identity in society. However, it is more appropriate to conceptualize inclusive heritage interpretation as 're-interpretation' because it denies modern heritage interpretation and identifies new negotiated value.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.2 s.24
• /
• pp.120-128
• /
• 2005

ISO 9001, the quality management system issued by the International Organization for Standardization, is being used by architectural design and engineering firms in order to strengthen the capability of business activities through the implementation of the international and advanced quality management systems. However, there have been significant problems in stable implementation and settlement of ISO 9001 in construction industry, which seem to be caused by key employees' lack of proper recognition and comprehension. The purpose of this research, accordingly, is to find and analyze nonconformity results which were found when the third party registrars audited the conformity of companies' quality management systems for ISO 9001 certification especially in architectural design and engineering firms. For this purpose this research was conducted by a cluster analysis of 647 audit reports out of representative 15 architectural design and engineering firms that have been audited periodically from 1997 to 2003 by the third party registrars. The analysis showed that the most frequent problems were generated in the areas of $\ulcorner$Design and Development$\lrcorner$ , $\ulcorner$production and Service Provision$\lrcorner$ , and $\ulcorner$General requirements$\lrcorner$ of the quality management system. The following, the areas of $\ulcorner$Monitoring and Measurement$\lrcorner$ and $\ulcorner$purchasing$\lrcorner$ were also analyzed as main factors which caused frequent nonconformity results. This research also shows that the corrective actions for nonconformity results are closely connected with the whole management activities in architectural design and engineering firms. Consequently, corrective actions for disposition of nonconformities should be implemented more specifically in order to settle and activate the quality management systems in architectural design and engineering firms.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.207-217
• /
• 2009

After replicating 10 bronze types such as Gyemija, Gyeongjaja, Eulhaeja, etc. before the Imjin war, we studied the change of microstructure from each casting process, method, and alloy ratio by Gyechukja replicated from "Donggukyeojiseungnam". We selected the average of compositions of Eulhaeja in the National Museum of Korea as the standard(Cu 86.7%, Sn: 9.7%, Pb: 2.3%) of bronze types, so we decided on the alloy's composition of Cu 87%, Sn 15%, Pb 8% added to 5% Sn and Pb contents because of evaporating the Sn and the Pb. Before replicating major metal types, we made master-alloy first, melting it again, and then replicated metal types. The composition of the 1'st replicated Gyechukja showed the range of Cu 85.81~87.63%, Sn 9.27~10.51%, Pb 3.05~3.19%. The 2'nd replicated Gyechukja made using the branch metal left after casting the 1st replica. The 2nd replicated Gyechukja showed the composition range of Cu 87.21~88.09%, Sn 9.06~9.36%, Pb 2.80~3.05%. This result decreases a little contents of Sn and Pb as compared with metal types of the 1st replica. However, it's almost the same as the Eulhaeja's average composition ratio in the National Museum of Korea. As a result of observing the microstructure of restored Gyechukja, it showed the dendrite structure of the typical casting structure and the segregation of Pb. There is no big difference of microstructure between the 1st and the 2nd restored metal types, even though the 2nd restored types partially decreases the eutectoid region in comparison with the 1st types. The systematic and scientific restoration experiment of metal types using Joseon period will be showed the casting method and alloy ratio, and this will be of great help to the study of restoration metal types in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.65-79
• /
• 1992

This study is concerned with the optimal design of two hinged steel arches with I cross sectional type and aimed at the exact analysis of the arches and the safe and economic design of structure. The analyzing method of arches which introduces the finite difference method considering the displacements of structure in analyzing process is used to eliminate the error of analysis and to determine the sectional force of structure. The optimizing problems of arches formulate with the objective functions and the constraints which take the sectional dimensions(B, D, $t_f$, $t_w$) as the design variables. The object functions are formulated as the total weight of arch and the constraints are derived by using the criteria with respect to the working stress, the minimum dimension of flange and web based on the part of steel bridge in the Korea standard code of road bridge and including the economic depth constraint of the I sectional type, the upper limit dimension of the depth of web and the lower limit dimension of the breadth of flange. The SUMT method using the modified Newton Raphson direction method is introduced to solve the formulated nonlinear programming problems which developed in this study and tested out throught the numerical examples. The developed optimal design programming of arch is tested out and examined throught the numerical examples for the various arches. And their results are compared and analyzed to examine the possibility of optimization, the applicablity, the convergency of this algorithm and with the results of numerical examples using the reference(30). The correlative equations between the optimal sectional areas and inertia moments are introduced from the various numerical optimal design results in this study.

• Analytical Science and Technology
• /
• v.23 no.5
• /
• pp.485-491
• /
• 2010

A certified reference material (CRM) of KRISS 109-03-SSD was developed for the analysis of hazardous elements in soil. The target elements were As, Cd, Cr, Cu, Hg, Ni, Pb, Zn being regulated by the Soil Environment Conservation Act. Starting material was collected from tailing dump of an unworked tungsten mine at Sangdong (Gangwon-do, Korea). The starting material under-went through a series of fabricating process steps of screening, drying, grinding, sieving, blending, bottling, sterilization and was certified according to the ISO Guide 35. Isotope dilution-inductively coupled mass spectrometry (ID-ICP/MS) and instrumental neutron activation analysis (INAA) were used for the measurement. Homogeneity was tested according to ISO 13528 annex B. The certified values were determined using the results from two different methods or from two independent measurements using a method. Finally, certified values of seven elements of arsenic, cadmium, chromium, copper, lead, nickel and zinc were determined. Mercury did not satisfied the criteria of homogeneity and the result would be provided for information only, together with iron and tungsten. It was also studied, the extractable fraction of elements by aqua regia according to the ISO 11466 protocol being frequently studied for the purpose of environmental monitoring. It was performed as a inter-laboratory study by 6 laboratories of a public institute and universities. Standard deviation among the laboratories was much bigger than the uncertainty of the certified value. The result of inter-laboratory study on the extractable fraction will be provided for information, only.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.20
• /
• pp.23-62
• /
• 2003

The Law amending the Conflict of Laws Act of the Republic of Korea ("Korea"), which had taken two years to prepare, was promulgated on April 7, 2001 and finally took effect as of July 1, 2001. Accordingly, the old earlier Conflict of Laws Act which was called "Seoboesabeop" in Korean ("Prior Act"Old Act) was replaced by the new Conflict of Laws Act called "Gukjesabeop" in Korean ("New Act"). In fact the Old Act Prior Act was promulgated in 1962, but it was regarded as outdated from the moment of its promulgation. However, since the Old Act because it was modeled after the chapter of the Private International Law of the Einfuehrungsgesetz zum Buergerlichen Gesetzbuch (EGBGB) of the Federal Republic of Germany ("German PIL") and the Japanese Private International Law ("Japanese PIL") which had been promulgated toward the end of the 19th century., the Old Act was viewed as outdated from the moment of its promulgation. As a result of the drastic change of the environment for international trade of which that has taken took place in parallel with the global information technology revolution on a global basis, the scope of issues to be addressed which should be resolved by the conflict of laws principles has been remarkably expanded, and various new issues of an entirely which are quite new in its type and nature have arisen been raised. In the field of conflict of laws in its narrow sense, a revolution or crisis of the traditional conflict of laws has been brought about by the advent in the United States rise of a the new methodology for of the conflict of laws, of the United States of America and in the process of overcoming the such crisis the conflict of laws of the European continent has undergone substantial changes such as the diversification of the connecting principles, the expansion of the principle of party autonomy and the consideration of the value of the substantive law to protect socio-economically weaker parties of. The Prior Act, which was based on However, with the mechanical connecting principles and contained various outdated the inappropriate provisions, the Old Act could not cope with the issues raised by the internationalization and globalization of the Korean society. Furthermore In addition, the Old Act Prior Act was regarded as insufficient in that it lacked rules on international jurisdiction to adjudicate, or international adjudicatory jurisdiction, whereas the expectation of the public was that the Conflict of Laws a Act should function as the "Basic Law of the International Legal Relationships"encompassing rules on international jurisdiction given the increase of international disputes. Furthermore the private international law has also attracted more attention from the Korean At the beginning of the new Millennium, thanks to the promulgation of the New Act, I believe that Korea has succeeded in achieving the modest goal of reflecting in the its codification substantial parts of the major developments of the private international law which the leading advanced continental European countries had achieved during the last century. The New Act has followed the approach of the traditional conflict of laws of the European continent. It is a product of the efforts to eliminate the then existing problems of the Prior Old Act and to adapt the Korean private international law regime to the standard of international conventions and national laws of advanced countries. Unlike the Prior Old Act which was heavily dependent upon the prior Japanese PIL and the prior German PIL, the New Act has been prepared by taking into full account the Rome Convention, the Swiss PIL, the new German PIL which took effect in 1986 and various conventions adopted by the Hague Conference. Therefore, the New Act has substantially reduced dependence upon the Japanese PIL and the German PIL, and has gained relatively greater universal validity. The fact that the New Act expressly declares that the determination of international jurisdiction is a matter of conflict of laws is a clear sign that it has departed from the German tradition which confines the conflict of laws principles to choice of laws rules, and moved toward a broader and more practical approach widely accepted in the area of conflict of laws. It is hoped, and I am personally confident, that the New Act will be able to achieve its intended objectives in the 21st century as the basic law for the ever-increasing legal relationships with a foreign element.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.651-660
• /
• 2016

Due to recent population aging, the number of check-up for senior citizens has increased steadily. According to this trend, the market size of dental X-ray equipment and the number of approval and review for these devices have simultaneously increased. The technical document of medical device is required for approval and review for medical device, and medical device companies needs to have work comprehension and expertise, as the document needs to include the overall contents such as performances, test criteria, etc.. Yet, since most of domestic manufacturers or importers of medical devices are small businesses, it is difficult for them to recruit professional manpower for approval of medical devices, and submission of inaccurate technical documents has increased. These problems lead to delay of the approval process and to difficulties in quick entering into the market. Especially, the Ministry of Food and Drug safety (MFDS) standards of a dental extra-oral X-ray equipment, a dental intra-oral X-ray equipment, an arm-type computed tomography, and a portable X-ray system have been recently enacted or not. this guideline of dental X-ray equipment adjusting revised standards was developed to help relative companies and reviewers. For this study, first, the methods to write technical document have been reviewed with revised international and domestic regulations and system. Second, the domestic and foreign market status of each item has been surveyed and analyzed. Third, the contents of technical documents already approved by MFDS have been analyzed to select the correct example, test items, criteria, and methods. Finally, the guideline has been developed based on international and domestic regulation, through close review of a consultative body composed of academic, industrial, research institute and government experts.

• Journal of Food Hygiene and Safety
• /
• v.30 no.2
• /
• pp.178-188
• /
• 2015

Microbial quality of baked egg products was evaluated by counting the levels of sanitary indicative bacteria (aerobic plate counts, coliforms, and E. coli), L. monocytogenes and Salmonella spp. at the critical control points (CCPs) of manufacturing process. In addition, the survival and growth of foodborne pathogens in various egg products (cheese, tuna, tteokgalbi, pizza omelets, baked egg, and steamed egg) were investigated at 4, 10, and $15^{\circ}C$. The contamination level of aerobic plate counts decreased from 4.67 log CFU/g at CCP 1 to 0.56 log CFU/g at CCP 3 in baked egg products. No coliforms and E. coli were detected at all CCPs. Although L. innocua and Salmonella spp. were identified at CCP 1, no L. monocytogenes and Salmonella spp. were detected in the final products. The contamination levels of aerobic plate counts and coliforms in egg strips and number of aerobic plate counts in Tteokgalbi omelet are higher than the microbiological standard of processed egg products. At $10^{\circ}C$, the growth of all pathogens was not prevented in omelet and baked egg, but the populations of S. Typhimurium and E. coli were reduced in steamed egg at $10^{\circ}C$, regardless of the presence of other pathogens. The growth of L. monocytogenes was faster than that of S. Typhimurium and E. coli in omelet. More rapid growth of S. Enteritidis than S. Typhimurium was observed in egg products, indicating the greater risk of S. Enteritidis than S. Typhimurium in egg products.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.27-32
• /
• 2010

This study was conducted to monitor aflatoxins in various medicinal herbs, providing available data for the safety of those products. To monitor aflatoxins in medicinal herbs, a total of 400 samples of 40 different herbs were collected in commercial retailers in Seoul, Daejeon, Gwangju, Daegu, and Busan from March to August, 2008. The samples that passed the sensory evaluation were tested for aflatoxins. Aflatoxins in samples were analyzed by HPLC-florescence coupled with photochemical enhancement. Samples were extracted with 70% methanol and then diluted to the appropriate concentration. A refining process was performed using an immunoaffinity column. The analytical method used in this study was validated. The $R^2$ value for aflatoxin $B_1$ was 0.99946, and the detection range was from 0.25 to 10.0 ng/mL. The accuracy of the analysis was ranged from 83.2% to 101.8%. The relative standard deviation (RSD) in the aflatoxin $B_1$ analysis was 3.4%, demonstrating the precision of this method. In addition, the detection limit and quantitative analysis limit of aflatoxin $B_1$ was $0.53\;{\mu}g/kg$ and $1.76\;{\mu}g/kg$, respectively. These results indicated that the analytical method used in this study was appropriate. The results of HPLC showed that 1% (4 samples) of the samples may contain aflatoxins. The concentration of quantified aflatoxin was $2.3\;{\mu}g/kg$ for both Quisqualis fructus and Remotiflori radix samples. The other samples were below the limit of quantification. Moreover, the concentration of aflatoxin $B_1$ which is made by specific fungi were below the level of regulation. Only 20% of aflatoxin $B_1$ were transferred to hot water. Therefore, the levels of aflatoxins in medicinal herbs were considered to be safe especially considering the aflatoxin transfer ratio.