• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1999.04a
• /
• pp.149-156
• /
• 1999

In the United States (U.S.), the monitored natural attenuation (MNA) approach has been used as an alternative remedial option for organic and inorganic compounds retained in soil and dissolved in groundwater. The U.S. Environmental Protection Agency (EPA) defines the MNA as“in-situ naturally-occurring processes include biodegradation, diffusion, dilution, sorption, volatilization, and/or chemical and biochemical stabilization of contaminants and reduce contaminant toxicity, mobility or volume to the levels that are protective of human health and the environment”. The Department of Soil Environment. National Institute Environmental Research (NIER) is in the process for demonstrating the MNA approach as a potential remedial option for the BTEX contaminated site in Uiwang City. The project is charactering the research site in terms of the nature and extend of contamination, biological degradation rate, and geochemical and hydrological properties. The microbial-degradation rate and effectiveness of nutrient and redox supplements will be determined through laboratory batch and column tests. The geochemical process will be monitored for determining the concentration changes of chemical species involved in the electron transfer processes that include methanogenesis, sulfate and iron reduction, denitrification, and aerobic respiration. Through field works, critical soil and hydrogeologic parameters will be acquired to simulate the effects of dispersion, advection, sorption, and biodegradation on the fate and transport of the dissolved-phase BTEX plume using Bioplume III model. The objectives of this multi-years research project are (1) to evaluate the MNA approach using the BTEX contaminated site in Uiwang City, (2) to establish a standard protocol for future application of the approach, (3) to investigate applicability of the passive approach as a secondary treatment remedy after active treatments. In this presentation, the overall picture and philosophy behind the MNA approach will be reviewed. Detailed discussions of the site characterization/monitoring plans and risk-based decision-making processes for the demonstration site will be included.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.176-186
• /
• 1996

The fit of a respirator to the face of an individual can be determined by a qualitative fit test (QLFT) or a quantitative fit test (QNFT). The pass/fail decision from a QLFT or QNFT for the same respirator on the same individual may vary from one wearing to the next, because the human facial features are complex and the respirator may not fit to the face in the same way every time it is worn. This study reports how the fit factors (FF) resulting from a QNFT on an individual vary from day to day and depend on the movements in the six fit test exercises. The reported FFs provide an objective and numerical basis (FF) which does not depend on the subject's voluntary or involuntary response. Four half-mask (H1-H4) and four full-facepiece respirators (F1-F4) were fit tested on one wearer 10 times a day for 5 days with a PortaCount (model 8010, TSI). The FFs obtained for each set of 10 fit tests on a specific day and 50 fit tests on five days involving one of the six exercise regimes have been recorded as log-normal distributions. All of the geometric standard deviations (GSD) of the overall FFs varied widely among every wearing and day except for H1 and F3, and the variability of the half-mask respirators was larger than that of the full-facepiece respirators. Among the six exercise regimes, reading or talking (RT) had markedly the lowest exercise FFs on the tested individual. Generally, there were significant differences between the first normal breathing (NB1) FFs and the remaining exercise FFs.

• The Journal of Engineering Geology
• /
• v.31 no.3
• /
• pp.269-281
• /
• 2021

Land creeping is the imperceptibly slow, steady, downward movement o f slope-forming soil or rock. Because creep-related failures occur frequently on a large scale without notice, they can be hazardous to both property and human life. Korea Forest Service has operated the prevention and response system from land creeping which has been on the rise since 2018. We categorized and proposed three survey steps (e.g., preliminary, regional, detailed) for investigation of creeping susceptibility site with a focus on geophysical mapping of a selected test site, Yongheung-dong, Pohang, Korea. The combination of geophysical (dipole-dipole electrical resistivity tomography and reciprocal seismic refraction technique, well-logging), geotechnical studies (standard penetrating test, laboratory tests), field mapping (tension cracks, uplift, fault), and comprehensive interpretation of their results provided the reliable information of the subsurface structures including the failure surface. To further investigate the subsurface structure including the sliding zone, we performed high-resolution geophysical mapping in addition to the regional survey. High-resolution seismic velocity structures are employed for stability analysis because they provided more simplified layers of weathering rock, soft rock, and hard rock. Curved slip plane of the land creeping is effectively delineated with a shape of downslope sliding and upward pushing at the apex of high resistive bedrock in high-resolution electrical resistivity model with clay-mineral contents taken into account. Proposed survey steps and comprehensive interpretation schemes of the results from geological, geophysical, and geotechnical data should be effective for data sets collected in a similar environment to land-creeping susceptibility area.

• Journal of Information Technology Services
• /
• v.17 no.4
• /
• pp.101-117
• /
• 2018

Companies are responding appropriately to the rapidly changing business environment and striving to lead those changes. As part of that, we are meeting our strategic goals through IT projects, which increase the number of simultaneous projects and the importance of project portfolio management for successful project execution. It also strives for efficient deployment of human resources that have the greatest impact on project portfolio management. In the early stages of project portfolio management, it is very important to establish a reasonable manpower plan and allocate performance personnel. This problem is a problem that can not be solved by linear programming because it is calculated through the standard deviation of the input ratio of professional manpower considering the uniformity of load allocated to the input development manpower and the importance of each project. In this study, genetic algorithm, one of the heuristic methods, was applied to solve this problem. As the objective function, we used the proper input ratio of projects, the input rate of specialist manpower for important projects, and the equal load of workload by manpower. Constraints were not able to input duplicate manpower, Was used as a condition. We also developed a program for efficient application of genetic algorithms and confirmed the execution results. In addition, the parameters of the genetic algorithm were variously changed and repeated test results were selected through the independent sample t test to select optimal parameters, and the improvement effect of about 31.2% was confirmed.

• Imaging Science in Dentistry
• /
• v.52 no.2
• /
• pp.171-179
• /
• 2022

Purpose: The aim of this study was to assess the accuracy of cone-beam computed tomographic (CBCT) images obtained using different voxel sizes in measuring trabecular bone microstructure in comparison to micro-CT. Materials and Methods: Twelve human skull bones containing posterior-mandibular alveolar bone regions were analyzed. CBCT images were obtained at voxel sizes of 0.075mm(high: HI) and 0.2mm(standard: Std), while microCT imaging used voxel sizes of 0.06 mm (HI) and 0.12 mm (Std). Analyses were performed using CTAn software with the standardized automatic global threshold method. Intraclass correlation coefficients were used to evaluate the consistency and agreement of paired measurements for bone volume (BV), percent bone volume (BV/TV), bone surface (BS), trabecular thickness (TbTh), trabecular separation (TbSp), trabecular number (TbN), trabecular pattern factor(TbPf), and structure model index (SMI). Results: When compared to micro-CT, CBCT images had higher BV, BV/TV, and TbTh values, while micro-CT images had lower BS, TbSp, TbN, TbPf, and SMI values (P<0.05). The BV, BV/BT, TbTh, and TbSp variables were higher with Std voxels, whereas the BS, TbPf, and SMI variables were higher with HI voxels for both imaging methods. For each imaging modality and voxel size evaluated, BV, BS, and TbTh were significantly different(P<0.05). TbN, TbPf, and SMI showed statistically significant differences between imaging methods(P<0.05). The consistency and absolute agreement between micro-CT and CBCT were excellent for all variables. Conclusion: This study demonstrated the potential of high-resolution CBCT imaging for quantitative bone morphometry assessment.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.5
• /
• pp.259-266
• /
• 2022

In this study, we developed a deep learning and vision sensor-based assembly performance evaluation method isfor prefabricated steel structures. The assembly parts were segmented using a modified version of the receptive field block convolution module inspired by the eccentric function of the human visual system. The quality of the assembly was evaluated by detecting the bolt holes in the segmented assembly part and calculating the bolt hole positions. To validate the performance of the evaluation, models of standard and defective assembly parts were produced using a 3D printer. The assembly part segmentation network was trained based on the 3D model images captured from a vision sensor. The sbolt hole positions in the segmented assembly image were calculated using image processing techniques, and the assembly performance evaluation using the k-nearest neighbor algorithm was verified. The experimental results show that the assembly parts were segmented with high precision, and the assembly performance based on the positions of the bolt holes in the detected assembly part was evaluated with a classification error of less than 5%.

• Journal of the Korea Society for Simulation
• /
• v.19 no.2
• /
• pp.9-16
• /
• 2010

This study presents a system for validating the PLC code in the virtual environments of automobile trim line. There have been considerable efforts to develop standard PLC editors for saving human power and PLC test time. However, it was difficult to apply the PLC editor on a real shop floor environment. A virtual equipment was developed to communicate with the PLC module of a shop floor and to make up the connectivity environment by a special protocol. We can validate the code without launching real equipments because the PLC module and the virtual equipment is able to be controlled in real time by the OPC protocol. An experimental model is applied to the final assembly line of an automotive industry and validated by using DELMIA Automation. In conclusion, the system is valuable in the process of PLC codes validation and virtual equipments operation. This system would reduce the development time of the PLC codes and improve the productivity and the integrity of the PLC codes.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.555-568
• /
• 2023

The diffusion strategies of wood culture were established using the analytic hierarchy process, to prepare a diffusion plan of wood culture and wood utilization in response to climate change due to global warming. 'Standardization of wood culture', 'Valuation of wood culture', and 'Habituation of wood culture' were set as three major implementation strategies and priorities were evaluated. As a result, it was analyzed in the following order: 'Development of systematic education programs for each age group for rational and efficient use of eco-friendly wood materials and development of wood education standard guidelines linked to the curriculum', 'Preparation of scientific basis data on human compatibility and eco-friendliness of wood to ensure the reliability of wood and wood products', and 'Establishment of monitoring and improvement plan through the designation as a model school'. Through this, it was determined that an educational environment, changes in public attitudes through publicity, and expanding opportunities to use wood and wood products were necessary for wood culture diffusion. The results of this study can be used as basic data to derive the diffusion strategies of wood culture and establish a roadmap and policy implementation strategy to revitalize wood culture.

• Journal of Periodontal and Implant Science
• /
• v.54 no.1
• /
• pp.25-36
• /
• 2024

Purpose: Mucogingival defects (MGDs), such as dental root recessions, decreased vestibular depth, and absence of keratinized tissues, are commonly seen in dental clinics. MGDs may result in functional, aesthetic, and hygienic concerns. In these situations, autogenous soft tissue grafts are considered the gold-standard treatment. This study compares the healing process of free gingival grafts (FGGs) to bacterial cellulose matrix (BCM) and human acellular dermal matrix (ADM) seeded with fibroblasts from culture supplemented with platelet-rich plasma in a rat model. Methods: Surgical defects were made in rats, which received the following treatments in a randomized manner: group I, negative control (defect creation only); group II, positive control (FGG); group III, BCM; group IV, BCM + fibroblasts; group V, ADM; and group VI, ADM + fibroblasts. Clinical, histological, and immunological analyses were performed 15 days after grafting. Clinical examinations recorded epithelium regularity and the presence of ulcers, erythema, and/or edema. Results: The histological analysis revealed the degree of reepithelization, width, regularity, and presence of keratin. The Fisher exact statistical test was applied to the results (P<0.05). No groups showed ulcers except for group I. All groups had regular epithelium without erythema and without edema. Histologically, all groups exhibited regular epithelium with keratinization, and myofibroblasts were present in the connective tissue. The groups that received engineered grafts showed similar clinical and histological results to the FGG group. Conclusions: Within the limitations of this study, it was concluded that BCM and ADM can be used as cell scaffolds, with ADM yielding the best results. This study supports the use of this technical protocol in humans.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.4
• /
• pp.93-106
• /
• 2023

The study is to develop and present a leggings pattern that is suitable for the human body by using a standard body type avatar for a female in her 30s. As a research method, the average body type was selected from adult women in their 30s, and the appearance was evaluated using the CLO software program. The data analysis of this study compared the dimensions and shape of each part by legging. The leggings pattern suggested based on the above research results was determine to be a total length of 80.6cm and hip length of 24cm, and the knee length was set by dividing the legging in half from the waist to the hem and then adding 5cm. These figures were evaluated higher than Company D in terms of the adequacy of the upper part of the front and rear plates of Company A as well as the adequacy of the knee lines. Company A's figures were applied and corrected. For the front plate, the waist circumference was divided by 4, and 3.5cm was removed, and the hip circumference was set by dividing the hip circumference by 4, and 3.8cm was removed. In the appearance evaluation results Company D was highly evaluated in the suitability evaluation of the waist and hips, and the waist and hips were set using the pattern of Company D. The length of the front panel was modified by dividing the hip circumference by 4 and adding 1.8cm to the length, and the length of the back panel was modified by dividing the hip circumference by 3 and adding 8cm after dividing the hip circumference by 0.8cm.