• Journal of Korean Academy of Rural Health Nursing
• /
• v.18 no.1
• /
• pp.40-48
• /
• 2023

Purpose: This study is a descriptive research that analyzes the current status of education for COVID-19 response tasks and factors affecting work fatigue of primary health care practitioners who have experience in dispatching to respond to COVID-19. Methods: This study collected data through an online survey from September 21 to 29, 2022, targeting 193 primary health care practitioners. The data were analyzed by frequency, percentage, mean, standard deviation, and logistic regression analysis using the SPSS 25.0 program. Results: 74.1% of the study subjects were dispatched without receiving disaster medical training to respond to COVID-19. 59.6% of the study subjects' work fatigue was above the level of being very tired. The factors that affect the work fatigue of the subjects were disaster participation experience, work intensity, compensation regulations, compensation satisfaction, and understanding of COVID-19 guidelines. Conclusion: Based on the results of this study, an educational program for systematic disaster response and preparation for primary health care practitioners in charge of public health care should be developed to efficiently cope with the occurrence of new infectious diseases in the future.

• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.4
• /
• pp.147-157
• /
• 2010

Objectives : The study is performed to investigate the influence of psychological stress on neck muscles tone and heart rate variability(HRV). Methods : This study was carried out with the data from stress response index score(SRI), surface electromyography(sEMG) and HRV. First subjects were divided into two group according to the SRI points. Subjects in group A had points of SRI in which lower than 30 points. Subjects in group B had points of SRI in which higher than 30 points. Then we investigated how to difference of the index of sEMG and HRV according to each groups. Results : In this study, the muscle contraction of both upper trapezius muscle in stress group were higher than non-stress group significantly. Complexity, root mean square of successive differences of R-R intervals(RMSSD), standard deviation difference between adjacent normal to normal intervals(SDSD), high frequency oscillation power(Ln(HF)), normalized HF(Norm HF) in stress group were lower than non-stress group significantly and normalized LF(Norm LF) was higher. Conclusions : This results show that the stress was associated with neck muscle condition and autonomic nervous system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.8 s.251
• /
• pp.897-905
• /
• 2006

This study considers an experimental design of disturbance compensation control to improve stabilization performance of main battle tanks. An adaptive non-parametric design technique based on the Filtered-x Least Mean Square(FXLMS) algorithm is applied in the consideration of model uncertainties. The optimal compensator is designed by two-step design procedures: determination of frequency response function of the disturbance compensator which can cancel the disturbance of series of single harmonics by using the FXLMS algorithm and determination of the compensator polynomial which can fit the frequency response function obtained in the first step optimally by using a curve fitting technique. The disturbance compensator is applied to a simple experimental gun-torsion bar-motor system which simulates gun driving servo-system. Along with experimental results, the feasibility of the proposed technique is illustrated. Experimental results demonstrate that the proposed control reduces the standard deviation of stabilization error to 47.6% that by feedback control alone. The directional properties of the FXLMS Algorithm such as the direction of convergence and its convergence speed are also verified experimentally.

• Journal of the Korean Society of Safety
• /
• v.8 no.1
• /
• pp.64-70
• /
• 1993

Serious injuries and deaths due to multi-jointed robot occur when a man mispercepts. especially during robot teaching and maintenance work. Since industrial robots often operate with unpredictable motion patterns, establishment of safe speed limit of robot arm is indispensable. An experimental emergency conditions were simulated with a multi-jointed robot. and response characteristics of human operators were measured. The result showed that failure type, robot arm axis. and robot arm speed had significant effects on human reaction time. The reaction time was slightly increased with robot arm speed. though it showed somewhat different pattern owing to failure type. Furthermore the reaction time to the axis which could flex or extend. acting on a workpiece directly. was fastest and its standard deviation was small. The robot arm speed limit securing a‘possible contact zone’based on overrun distance was about 25cm/sec. and in this sense the validity of safe speed limits suggested by many precedent researchers were discussed.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.3
• /
• pp.200-205
• /
• 1990

Chemically modified electrodes(CMEs), based on 2-imino-1-cyclopentane-dithiocarboxylic acid (icdc) containing carbon paste, have been characterized using cyclic voltammetric techniques. Ag(I) was chemically deposited on the CMEs, and voltammograms were obtained with the electrode in a separate buffer solution. The CME surface can be regenerated with exposure to acid and reused for deposition. In 10 deposition/measurement/regenerate cycles, the linear response have been reproduced up to $1{\times}10^{-6}$ M in linear sweep voltammetry and 1${\times}$10-8 M in differential pulse voltammetry with relative standard deviation of 5.2% and 12.4%, respectiveiy. The sensitivity increased with deposition time and scanning rate, and detection limit was $1{\times}10^{-7}M\;and\;1{\times}10^{-9}M$ at 20 minutes deposition in the linear sweep voltammetry and differential pulse voltammetry, respectively. The presence of some metal ions does not influence the silver ion response. Satisfactory results were obtained for the analysis of the silver ion for a variety of reference materials without interference of Hg ion at the condition of pH = 5-6.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2291-2296
• /
• 2013

An efficient carbon monoxide (CO) sensor was developed based on poly(3,4-ethylenedioxy)thiophenepoly(styrenesulfonate) (PEDOT:PSS) modified with a new pyrimidine-fused heterocyclic compound, bis(2-hydroxyphenyl)dihydropyrido[2,3-d:6,5-d]dipyrimidine-tetraone (B2HDDT). B2HDDT remains stable in the polymer matrix through interactions with functional groups of the polymer. It created prominent sites that captured CO gas, and the experimental parameters, including the amount of doped B2HDDT in the PEDOT:PSS film, were optimized. The sensor probe was also examined to verify its reliability for detecting CO in the presence of atmospheric gases in a discriminating manner. NMR, AFM, and FT-IR spectra were obtained to evaluate the structure and morphology of the B2HDDT-doped PEDOT:PSS (PEDOT:PSS/B2HDDT) film. The content of 35 vol % B2HDDT (7.0 mM) in PEDOT:PSS provided the largest response factor (${\Delta}R/R_o$) for the CO gas. The sensor response was reproducible, with a relative standard deviation < 5% (n = 5). The detection limit was determined to be $0.44{\pm}0.05$ vol %.

• Analytical Science and Technology
• /
• v.13 no.3
• /
• pp.315-322
• /
• 2000

The response characteristics of the bioelectrode developed by the co-immobilization of spinach root tissue and ferrocene in a carbon paste matrix for the amperometric determination of hydrogen peroxide were evaluated. In the range of electrode potential examined (-0.3~0.0V vs. Ag/AgCl). the response time was relatively short ($t_{95%}=11.8$ sec) and it responded in the wide range of pH. Also, its detection limit was $2.25{\times}10^{-6}M$ (S/N=3) and a relative standard deviation of the measurements which were repeated 15 times using $1.0{\times}10^{-3}M$ hydrogen peroxide was 1.87%. The bioelectrode sensitivity decreased to 40% of the original value in 19 days of continuous use.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.2
• /
• pp.71-79
• /
• 2022

The aim of this study is to see how government spending on education, health, and social security affects ratios in Indonesia. The third sector has a critical role to play in reducing the dependency ratio. It also aims to lower unemployment and poverty rates. This study uses the GMM panel data model. This model can determine the dynamic response of the ratio that comes from a number of variables. This study uses data from 33 provinces from 2010 to 2018. The results show that government spending in the education and health sectors has a positive effect on the dependency ratio, both in the short and long term. Social security has a significant effect on the dependency ratio in the long term, but not in the short term. Government spending in the education sector and health sector and social security sector have a positive and significant effect on disease and illness. The study's findings show a high level of poverty with a large standard deviation. The high ratio value is due to the large number of restrictions placed on a number of regions. Each province has made a significant contribution to overcoming these challenges, particularly in terms of the comparative ratio.

• Proceedings of the IEEK Conference
• /
• 2000.06c
• /
• pp.181-184
• /
• 2000

In this paper, we propose new features for describing texture images by using multi-channel Gabor filter and log-polar transform based on human visual system (HVS). Gabor features are extracted by the mean and standard deviation of energy in Gabor response, followed by Fourier series extension. Log-polar features are extracted by log-polar transform and projection. The proposed texture descriptor performs reasonably well with less number of features than other texture descriptors, which has been verified by experiments using some texture images of MPEG-7 data set.

• Journal of environmental and Sanitary engineering
• /
• v.7 no.1
• /
• pp.79-86
• /
• 1992

Rapid determination of chlorpyrifos and fluvalinate in mixed insecticide was established by using high performance liquid chromatography. Result were as follows : 1. On Lichrosorb${\circledR}$ RP-8(10 ${\mu}m$) Column with on fluent of acetanitrile : water=75 . 25, sufficient separation of Chlorpyrifos and Fluorinate of base was obtained. 2.410td portion the diluted solution was injected in to the cdumn, and the effluent was monitored by on UV-Detector at 270 nm. 3. Relative Standard Deviation were 0.97% (chlorpyrifos) and 0.5% (fluorinate) under analysis conditions. 4. The UV-Detector response at 270 nm were linear (Y=421.8X-2090, $R^2=0.9997$ : Chlorpyrifos, Y= 1062.7X-4017.7, $R^2=0.9998$ : Fluorinate) over a range of 30~500 ${\mu}g/ml$.