• Journal of Soil and Groundwater Environment
• /
• v.7 no.2
• /
• pp.63-71
• /
• 2002

The authors selected the modified soil method, and then performed the geotechnical and environmental laboratory test, and evaluated whether the modified soil liner could be accepted as a barrier layer in landfill. Unlike the results of the natural soil(CL), those of the hydraulic conductivity test of stabilized soil met the standard value. According to these results, the optimal mixing ratio of a mixture(cement : bentonite : stabilizing agent) was 90 : 60 : 1 with mass ratio(kg) for 1㎥ with soil, and it was possible to use poor quality bentonite. B\circled2 because of a little difference from results with high quality bentonite. B\circled1. The Cation Exchange Capacity(CEC) of the modified soil was increased about 1.5 times compared with the natural soil; however. the change of CEC with a sort of additives was not detected. In order to observe the change of the chemical components and crystal structures, the natural and the modified soils with the sorts of additives were measured by the XRF(X-Ray Flourescence Spectrometer) and SEM, but there was no significant change. The artificial leachate with the heavy meals ($Pb^{2+}$ , $Cu^{2+}$, $Cd^{2+}$ Zn$^{2+}$ 100mg/L) was passed through the natural soil and modified soils in columns. In the natural soil, Cd$^{2+}$ and $Zn^{2+}$ were identified, simultaneously the pH of outflow was lower, and then came to the breakthrough point. The removal efficiency of the natural soil was showed in order of following : $Pb^{2+}$ ≒$Cu^{2+}$ > $Zn^{2+}$ > $Cd^{2+}$ On the other hand, modified soils were not showed the breakthrough condition like the result of the natural soil. The modified soil with the lower quality bentonite, B\circled2(column3) was more stable with respect to chemical attack than that with the higher bentonite, B\circled1(column2) because the change range of outflow pH in columns was less than that of outflow pH in column2. In addition, the case of adding the stabilizing agent(column4) was markedly showed the phenomena.ena.

• Journal of Korean Home Economics Education Association
• /
• v.29 no.4
• /
• pp.1-14
• /
• 2017

This study described the status of family dining and personality of adolescents, determined the differences in family dining according to personal variables, and examined the relationship between family dining and personality in adolescence. The Data were collected from self-reported inventory of the middle and high school students in a city and 1,259 data copies were used for analyses. Data were analyzed for frequency, percentage, mean, standard deviation, Cronbach's ${\alpha}$, t-test, ANOVA, scheffe test, and multiple regression analysis using SPSS/PC 18.0 program. The results obtained were as follows. First, as for the weekly family dining frequency, more than 7 times had the most number of responses(44.2%), followed by 1~2 times(20.8%), 3~4 times(18.1%), 5~6 times(12.9%). The average scores for family dining perception and family dining attitudes were 3.75 and 3.42 on a 5-Likert scale, respectively, which means moderately high. But, family dining rules was 2.80, which means moderate. Agreeableness was the highest(3.68) among the personality components followed by Openness/intellect(3.42), Extraversion(3.33), Conscientiousness(3.14), and Emotional Stability(3.05) out of 5-point Likert scale. Second, there were statistically significant differences in family dining frequency, family dining perception, family dining rules, and family dining attitudes depending on the gender, school level, and the father's academic attainment. Third, family dining frequency, family dining perception, and family dining attitudes had statistically significant influence on the personality of adolescents after personal variables were considered. But, there was no significant relationship between family dining rules and the personality. The outcomes indicate that family dining affects the personality of adolescents. School needs to offer quality programs with various teaching methods to enhance family dining frequency, family dining perception, and family dining attitudes.

• Journal of Korean Academy of Nursing
• /
• v.13 no.2
• /
• pp.22-43
• /
• 1983

1. Need for and Purpose of the Study. There is an increasing demand for curriculum improvement of the Korean Army Nursing Academy (KANA), since it was upgraded into 4-year institution of higher learning from 3-year one. In particular, it is strongly advocated that the KANA needs the outside expertise for its curriculum improvement-namely not only from the internal military view of points but also from the viewpoints of professional educational society, In line with such a necessity for the study, this study was aimed at 1) analyzing the current actual practices of KANA'S curriculum, 2) investigating the desired practices of KANA'S curriculum, and 3) identifying the discrepancy between the actual and desired practices of curriculum. 2. Problems for the Study This study had 4 problems to be answeared as follows: 1) What are the actual curriculum practices of KANA? 2) What are the desired curriculum practices of KANA? 3) How are the extents of perception of actual and desired curriculum different in four groups (student, faculty & administrator, nurse, and medical doctor in militay hospital) ? 4) What are the restraining forces that impede the change from actual to desired curriculum practices? 5) What are the relationships of curriculum component,』 in actual and desired curriculum practices? 3. Methods and Procedures This study was conducted by means of document analysis in addition to literature review and by means of needs assessment questionnaire which was developed by the researcher. The questionnaire included 62 statments with 7 questions for demographic data collection. The needs assessment questionnaire was managed to a total of 243 subjects (100 students, 46 faculty & administrators, 55 nurses, and 42 medical doctors), The collected data were treated using SPSS computer system so as to calculate mean scores, standard deviations, and correlation coefficients. The significance test was made through t-test and one-way ANOVA. The statistical significance level was set at both .05 and .01 level. 4. Major findings The major findings in this study are as follows: 1) The score of desired practices was significantly greater than that of actual practices, representing a strong need for curriculum betterment. 2) There were significant differences in the perceptions of actual practices as well as desired practices among four groups (student, faculty & administrater, nurse, and medical doctor). 3) The most frequently selected restraining forces were army's inherent character, economical limitation, and educational expertise limitations. 4) Such variables as sex, position attachment to the KANA and grade made a statistically significant effect on the perception of desired curriculum practice, while the variables like marrige, position, and military class made it on the perception of actual curriculum practice. 5) The coefficients among the curriculum components were lower in perception of the actual curriculum practices than those in the desired practices. 5. Conclusions The conclusions based on the major findings of this study are as follows: 1) The current curriculum development procedure of the KANA is not consistent with the theoretical frame of systematic development sarategy of curriculum. 2) There are wide conflicts among the groups who are supposed to participate in curriculnm development, concerning the actual and desired practices of KANN'S curriculum. 3) A great deal of need for curriculum improvement for the KANA is clearly felt, and in particular, in the process of teaching and learning. 4) Each component of curriculum is not intergrated into a whole development procedure, being segregated each other. 5) For better curriculum improvement, such restraining forces as financial and professional limitations should be eliminated. 6. Recommendations 1) For Further Research a. There is a need to replicate this study after in-depth statistical analysis of each item of need assessment questionnaire, and with more representative subjects. b. A study should be conducted which. has its focus on the analysis of restraining forces for the change from actual to desired curriculum practices of the KANA. 2) For KANA'S Curriculum Improvement a. There is a need to promote the professional expertise of the participants in curriculum development and the communication among them. b. It is desirable to establish an institution or section of administration, which is soley in charge of curriculum development. c. To better develop KANA's curriculum not only faculty and administrators but also students should be encouraged to participate in development process, while the military medical doctors' participation should be carefully considered.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.7
• /
• pp.21-28
• /
• 2017

Practical models for FPGA architectures which include performance- and/or density-enhancing components such as carry chains, wide function multiplexers, and memory/multiplier blocks are being applied to academic FPGA placement tools which used to rely on simple imaginary models. Previously the techniques such as pre-packing and multi-layer density analysis are proposed to remedy issues related to such practical models, and the wire length is effectively minimized during initial analytic placement. Since timing should be optimized rather than wire length, most previous work takes into account the timing constraints. However, instead of the initial analytic placement, the timing-driven techniques are mostly applied to subsequent steps such as placement legalization and iterative improvement. This paper incorporates the timing driven techniques, which check if the placement meets the timing constraints given in the standard SDC format, and minimize the detected violations, with the existing analytic placer which implements pre-packing and multi-layer density analysis. First of all, a static timing analyzer has been used to check the timing of the wire-length minimized placement results. In order to minimize the detected violations, a function to minimize the largest arrival time at end points is added to the objective function of the analytic placer. Since each clock has a different period, the function is proposed to be evaluated for each clock, and added to the objective function. Since this function can unnecessarily reduce the unviolated paths, a new function which calculates and minimizes the largest negative slack at end points is also proposed, and compared. Since the existing legalization which is non-timing driven is used before the timing analysis, any improvement on timing is entirely due to the functions added to the objective function. The experiments on twelve industrial examples show that the minimum arrival time function improves the worst negative slack by 15% on average whereas the minimum worst negative slack function improves the negative slacks by additional 6% on average.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.1
• /
• pp.123-136
• /
• 2004

In this paper, complexity and regularity of polynomial multiplication over $GF({2^n})$ are defined by using Hamming weight of rows and columns of the matrix ever GF(2) which represents polynomial multiplication. It is shown experimentally that in order to construct the block cipher robust against differential cryptanalysis, polynomial multiplication of substitution layer and the permutation layer should have high complexity and high regularity. With result of the experiment, a way of constituting S box and G function is suggested in the block cipher whose structure is similar to SEED, which is KOREA standard of 128-bit block cipher. S box can be formed with a nonlinear function and an affine transform. Nonlinear function must be strong with differential attack and linear attack, and it consists of an inverse number over $GF({2^8})$ which has neither a fixed pout, whose input and output are the same except 0 and 1, nor an opposite fixed number, whose output is one`s complement of the input. Affine transform can be constituted so that the input/output correlation can be the lowest and there can be no fixed point or opposite fixed point. G function undergoes linear transform with 4 S-box outputs using the matrix of 4${\times}$4 over $GF({2^8})$. The components in the matrix of linear transformation have high complexity and high regularity. Furthermore, G function can be constituted so that MDS(Maximum Distance Separable) code can be formed, SAC(Strict Avalanche Criterion) can be met, and there can be no weak input where a fixed point an opposite fixed point, and output can be two`s complement of input. The primitive polynomials of nonlinear function affine transform and linear transformation are different each other. The S box and G function suggested in this paper can be used as a constituent of the block cipher with high security, in that they are strong with differential attack and linear attack with no weak input and they are excellent at diffusion.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.133-144
• /
• 2006

According to the latest report by the Customer Protection Board, those who moved into newly constructed buildings are complaining about unidentified pains, asking for more careful selection of constructive materials for prevention of such potential problems. It is internationally recognized today that ecological materials can serve a significant factor for users' health, environmental protection and better industrial competitiveness. This study examined eco-design aspects of each interior material through web site search, in order to help customers learn about and capitalize on eco materials in a proper manner. As a result, 1. It turned out that the domestic industry are giving an impetus to releasing new eco items focusing on lower VOCs emission or addition of functional components as part of the marketing strategy. However, it is recommended that company understand significance of life cycle, and produce eco-concept materials. 2. The reliable standard for choosing the domestic material is EL, HB, GR marks. It is desirable to enhance recycling technologies and expand the sustainable consumption. customer class, since many recycled items are not developed. 3. The sourcing is a vulnerable part in terms of the concept of being environment-friendly material. Therefore, many manufacturers should design the easy knock-down products and produce the good items using recycled materials instead of new raw materials. Also solutions for making the energy from burning material should be studied. 4. The guidebook or manual with correct information about eco-materials is required to promote production and consumption with sustainable concept. 5. Many manufacturers are emphasizing ecological materials for customers, but some of them intended to disrupt customers' proper selection by promoting even unverified items to be environment-friendly.

• Korean Journal of Poultry Science
• /
• v.43 no.3
• /
• pp.149-157
• /
• 2016

This study was performed to investigate the effects of the stocking density (standard stocking density (SSD, $495cm^2/bird$)) vs. high stocking density (HSD,245cm2/bird) and challenge with lipopolysaccharide (LPS, 5mg/kg BW) on the stress-related physiological indicators in chicks. There was a significant (p<0.05) decrease in body weight, but not in the weight of immune organs, between the SSD and HSD groups. The LPS group resulted in a significant (p<0.05) increase in the weights of the thymus and bursa of fabricius compared with the SSD group. Plasma biochemical components, including aspartate transaminase (AST), alanine transaminase (ALT), blood urea nitrogen, Ca, P, creatine kinase and uric acid, markedly (p<0.05) increased in the LPS birds, although no difference in these parameters was observed between the SSD and HSD birds. Furthermore, the birds challenged with LPS showed a significant (p<0.05) increase in the plasma corticosterone level, although this hormone did not differ between the SSD and HSD groups. In the mRNA expression of pro-inflammatory cytokines, hepatic $IL-1{\beta}$, IL-6 and iNOS in the LPS group significantly (p<0.05) increased compared with those in the SSD group. Thymic mRNA expression of $IL-1{\beta}$, IL-6 and IL-18 in the LPS group also significantly (p<0.05) increased compared with those in the other groups. In addition, mRNA expression of $IL-1{\beta}$ in the bursa of fabricius of the LPS group increased (p<0.05) without affecting the other cytokines. Under high stocking density, thymic $IL-1{\beta}$ was the only cytokine that was up-regulated compared with the SSD group. In conclusion, an acute stress induced by LPS challenge profoundly affected immune organ weight, blood biochemical profiles and pro-inflammatory cytokine expression, while chronic stress did not markedly affect biochemical and immunological parameters, suggesting that chicks under high stocking density could be adapted to prolonged stressors.

• Journal of Mushroom
• /
• v.18 no.1
• /
• pp.120-124
• /
• 2020

This study was conducted to provide basic data for setting a standard medium for winter mushroom cultivation. Investigation of medium composition in winter mushroom farms in Korea revealed that the types of medium used for each farm were slightly different and that the mixing ratio of the medium also varied. All farmers used corncob, rice bran, and beet pulp as the main media, and calcium carbonate and ground oyster shells were used at 1.0~3.8% to adjust the pH of the medium. Analysis of the physicochemical properties of the mixed media showed nitrogen content of 1.28~1.52%, carbon content of 45.7~48.5%, and C/N ratio of 30.7~37.9. The content of inorganic components was significantly different in each farm, depending on the type and amount of minerals in the mixed medium. Mycelial growth was the fastest at Farm 2, reaching 6.5 cm within 34 days of culture, followed by Farm 4 at 5.7 cm, whereas Farm 1, 3, and 5 showed similar growth. Mycelial density was high without any significant difference between farms. Survey of yield according to medium composition in each farm showed the highest yield in Farm 2 at 173.4 g/bottle, followed by Farm 1 at 168.4 g/bottle, whereas Farm 3 and 4 showed similar yield. However, Farm 4 had the lowest yield at 145.4 g/bottle. Therefore, mushroom yield was different depending on the medium composition in the farm, and thus selection of a medium that can be used universally in multiple mushroom farms was considered possible.

• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.447-454
• /
• 2012

To examine the performance of a diagnostic X-ray system, we tested a linearity, reproducibility, and Half Value Layer(HVL). The linearity was examined 4 times of irradiation with a given condition, and we recorded a level of radiation. We then calculated the mR/mAs. And the measured value should not be more than 0.1. If the measured value was more than 0.1, we could know that the linearity was decreased. The reproducibility was analyzed 10 times of irradiations at 80kVp, 200mA, 20mAs and 120kVp, 300mA, 8mAs. The values from these analyses were integrated into CV equation, and we could get outputs. The reproducibility was good if the output was lower than 0.05. HVL was measured 3 times of irradiation without a filter, and we inserted additional HLV filters with 0, 1, 2, 4 mm of thickness. We tested the values until we get the measured value less than a half of the value measured without additional filter. We tested the linearity, the reproducibility, and HVL of 5 diagnostic X-ray generators in this facilities. The linearity of No. 1 and No. 5 generator didn't satisfy the standard for radiation safety around 300mA~400mA and 100mA~200mA, respectively. HVL of No.1 generator was not satisfied at 80kVp. The outputs were higher in the three-phase equipment than the single-phase equipment. The old generators need to maintain and exchange of components based on the these results. Then, we could contribute to getting more exact diagnosis increasing a quality of the image and decreasing an expose dose of radiation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.2
• /
• pp.71-84
• /
• 2004

There is a growing demand for agrometeorological information that end-users can use and not just interesting information. lo achieve this, each region/community needs to develop and provide localized climate and weather information for growers. Additionally, provide tools to help local users interpret climate forecasts issued by the National Weather Service in the country. Real time information should be provided for farmers, including some basic data. An ideal agrometeorological information system includes several components: an efficient data measuring and collection system; a modern telecommunication system; a standard data management processing and analysis system; and an advanced technological information dissemination system. While it is conventional wisdom that, Internet is and will play a major role in the delivery and dissemination of agrometeorological information, there are large gaps between the "information rich" and the "information poor" countries. Rural communities represent the "last mile of connectivity". For some time to come, TV broadcast, radio, phone, newspaper and fax will be used in many countries for communication. The differences in achieving this among countries arise from the human and financial resources available to implement this information and the methods of information dissemination. These differences must be considered in designing any information dissemination system. Experience shows that easy across to information more tailored to user needs would substantially increase use of climate information. Opportunities remain unexplored for applications of geographical information systems and remote sensing in agro meteorology.e sensing in agro meteorology.