• Journal of Information Management
• /
• v.35 no.2
• /
• pp.57-85
• /
• 2004

This is the comparative study about analyzing the methodologies of building ontology with IEEE Standard 1074-1997. The methodologies are chosen to be analyzed. They are OTK, CommanKADS, ONIONS and Noy & McGuinness's Ontology Development 101. On the basis of analyzing, the ontology development process is proposed after the strong points of four methodologies are accepted but the weak points of them are supplemented. The sixth development steps are following: 1) Conducting the feasibility study about ontology building as the pre-development process 2) Setting up the purpose of the ontology development as the starting point of the building 3) Considering the integration of the existing ontologies for the knowledge reuse 4) Constructing the ontology by defining the concepts and relations 5) Evaluating and testing the ontology for the completeness 6) Containing the ontology maintenance for the sustainable use.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.427-441
• /
• 2021

Purpose: This study proposes a method for developing a model that predicts the probability of traffic accidents in advance to prevent the most frequent traffic accidents in the military. Method: For this purpose, CRISP-DM (Cross Industry Standard Process for Data Mining) was applied in this study. The CRISP-DM process consists of 6 stages, and each stage is not unidirectional like the Waterfall Model, but improves the level of completeness through feedback between stages. Results: As a result of modeling the same data set as the previously constructed accident investigation data for the entire group, when the classification criterion was 0.5, Significant results were derived from the accuracy, specificity, sensitivity, and AUC of the model for predicting traffic accidents. Conclusion: In the process of designing the prediction model, it was confirmed that it was difficult to obtain a meaningful prediction value due to the lack of data. The methodology for designing a predictive model using the data set was proposed by reorganizing and expanding a data set capable of rational inference to solve the data shortage.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3123-3129
• /
• 2016

Background: Cancer is the fourth leading cause of death in Sabah Malaysia with a reported age-standardized incidence rate was 104.9 per 100,000 in 2007. The incidence rate depends on non-mandatory notification in the registry. Under-reporting will provide the false picture of cancer control program effectiveness. The present study was to evaluate the performance of the cancer registry system in terms of representativeness, data quality, simplicity, acceptability and timeliness and provision of recommendations for improvement. Materials and Methods: The evaluation was conducted among key informants in the National Cancer Registry (NCR) and reporting facilities from Feb-May 2012 and was based on US CDC guidelines. Representativeness was assessed by matching cancer case in the Health Information System (HIS) and state pathology records with those in NCR. Data quality was measured through case finding and re-abstracting of medical records by independent auditors. The re-abstracting portion comprised 15 data items. Self-administered questionnaires were used to assess simplicity and acceptability. Timeliness was measured from date of diagnosis to date of notification received and data dissemination. Results: Of 4613 cancer cases reported in HIS, 83.3% were matched with cancer registry. In the state pathology centre, 99.8% was notified to registry. Duplication of notification was 3%. Data completeness calculated for 104 samples was 63.4%. Registrars perceived simplicity in coding diagnosis as moderate. Notification process was moderately acceptable. Median duration of interval 1 was 5.7 months. Conclusions: The performances of registry's attributes are fairly positive in terms of simplicity, case reporting sensitivity, and predictive value positive. It is moderately acceptable, data completeness and inflexible. The usefulness of registry is the area of concern to achieve registry objectives. Timeliness of reporting is within international standard, whereas timeliness to data dissemination was longer up to 4 years. Integration between existing HIS and national registration department will improve data quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3B
• /
• pp.360-374
• /
• 2004

The OSPF protocol is the most widely used Interior Gateway Routing Protocol. Therefore, for the reliability of behavior of gigabit swiching routers, it is essential to guarantee the interoperability and the safety of the OSPF protocol. In this paper, we analyze the standard document of the OSPF protocol, so that we provide a formal specification that specifies the protocol behaviors by detailed design level using the algebraic formal method. By referring available source codes of the OSPF protocol, we supplement the formal specification to express more detailed behaviors that is not specified definitely in the standard. We also formally verify the interoperability and the safety of the protocol state machine of the specification. By showing that the formal specification specify all of the states and the transition events that appear in the standard document of the OSPF protocol, we prove that the state machine has the completeness, and prove it has the interoperability. To prove that the specification of the protocol has the safety, we formally verify the reachability, the liveness, the livelock-free property, and the deadlock-free property. As a result, we prove the protocol has the consistency. The specification and the validation are also effective to the OSPF Version 3 that inherit the protocol mechanism of the OSPF Version 2.

• Journal of Hospice and Palliative Care
• /
• v.7 no.2
• /
• pp.200-213
• /
• 2004

Purpose: The purpose of this study was to create an electronic nursing record form to build a hospice nursing process database to be used in the u-hospital EMR system. Specific aims of the study were: 1. To generate a complete, accurate, and simple electronic nursing record form. 2. To verify its appropriateness following documentation with the standardized hospice protocol. 3. To verify its validity and finalize the hospice nursing process database through discussion among hospice professionals. Methods: Nursing records from three independent hospice organizations were collected and analyzed by five expert hospice nurses with more than 10 years of experience, and a nursing record database was developed. This database was applied to 81 hospice patients at three hospice organizations to verify its completeness. Results: 1. An electronic nursing record form with completeness, accuracy, and simplicity was developed. 2. The completeness of the standardized home hospice service protocol was 95.86 percent. 3. The hospice nursing process database contains 18 items on health problems, 79 items on related causes and major symptoms, and 229 items on nursing interventions. Conclusion: The new nursing record form and database will reduce documentation time and articulate and streamline the working process among team members. They can also improve the quality of hospice services, and ultimately enable us to estimate hospice service costs.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.981-985
• /
• 2004

In this paper we designed the motor control IP Core and evaluate its quality from the viewpoint of IP reuse. The most attractive merit of this methodology, so called IP-based hardware design, is hardware reuse. Although various vendors designed hardware with the same specification and got the same functional results, all that IPs is not the same quality in the reuse aspect. As tremendous calls for SoC have been increased, associated research about IP quality standard, VSIA(Virtual Socket Interface Alliance) and STARC(Semiconductor Technology Academic Research Center), has been doing best to make the IP quality evaluation system. And they made what conforms to objective IP design standard. We suggest the methodology to evaluate our own designed motor control IP quality with this standard. To attain our goal, we designed motor control IP that could control the motor velocity and position with feedback compensation algorithm. This controller has some IP blocks : digital filter, quadrature decoder, position counter, motion compensator, and PWM generator. Each block's functionality was verified by simulator ModelSim and then its quality was evaluated. To evaluate the core, We use Vnavigator for lint test and ModelSim for coverage check. During lint process, We adapted the OpenMORE's rule based on RMM (Reuse Methodology Manual) and it could tell us our IP's quality in a manner of the scored value form. If it is high, its quality is also high, and vice versa. During coverage check ModelSim-SE is used for verifying how our test circuits cover designs. This objective methods using well-defined commercial coverage metrics could perform a quantitative analysis of simulation completeness. In this manner, We evaluated the designed motor control IP's quality from the viewpoint of reuse. This methodology will save the time and cost in designing SoC that should integrate various IPs. In addition to this, It can be the guide for comparing the equally specified IP's quality. After all, we are continuously looking forward to enhancing our motor control IP in the aspect of not only functional perfection but also IP reuse to prepare for the SoC-Compliant motor control IP design.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.439-448
• /
• 2018

This thesis intends to suggest a new wedding dress pattern through researches on history and changes of wedding dress, researches on silhouette and details and analyses of existing basic patterns. In this study, to develop torso patterns of top dresses selected as preferred designs through literature reviews and company surveys, dress form sizes suitable for standard sizes were selected and study basic patterns were made using draping techniques. The study finds characteristics of body type dimension that is changed when wearing brassiere (hereinafter, 'bra') for wedding dress through customer surveys for development of basic patterns of wedding dress. That is, wearing wedding bra was used for the purpose of increasing the bust size and we will evaluate later whether this increase helps completeness of aesthetic impression through wearing evaluation. As the result, it was found out that top torso pattern wearing wedding bra made wearers feel more comfortable and in the aspect of aesthetic impression, it provided impacts on women's beautiful silhouettes. The effects of whether a bra is used or not on changes in patterns were reviewed through the degree of polymerization of finished patterns. When a bra for dresses was worn, the waist front length increased by1.7cm, the bust circumference increased by 2.1cm, and the amount of dart increased by 1.5cm in the patterns. A new torso pattern for top dresses, which will solve problems evaluated in each of the above from the aspect of composition of pattern by a method through analysis of existing basic patterns and multi-dimensional cut patterns wearing wedding bra, will be suggested.

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.27-33
• /
• 2018

Korea's automobile industry, which has grown rapidly to become the world's fifth-largest automobile producer, To cope with environmental pollution and energy problems in order to prevail competitive edge in global market We are investing a lot of research personnel and costs. Among them, for realizing alternative light weight It is a part of the automobile module system that has achieved the technological development before the breakthrough in the injection molding process in the press process. Door module PNL was the subject of research. The door module PNL is expected to cause warpage before the mold production due to the thin and flat product characteristics and fiber orientation characteristic of the material. In this paper, CAE analysis and reverse correction tool Design. CAE analysis to obtain the results of weld line position, bending position and deformation value Through the correction tool, think3, the original product was modified before the mold production to improve the completeness of the parts. In fiber orientation, the position and size of the cooling channel in the mold, the position and size of the gate, Temperature, pressure, time, and work environment. Compared with the result of CAE analysis, the product that was reverse-corrected by Think3 was manufactured, and injection molding was performed. Injection molding products were tested 24 hours later. 3.5 mm to 7.0 mm, and under the fixed condition, the deviation was from 1.1 mm to 1.5 mm. Unlike the CAE analysis, the deviation of the actual injection pressure and the cooling temperature, the fiber orientation of the material, In order to solve this problem, it is necessary to compare the injection conditions with the database, I knew I had to catch the standard.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.131-143
• /
• 2013

There is the difference of criteria to apply guidelines among the project participants and to depend on the purpose of utilizing BIM models, although modeling criteria are basically provided through BIM guidelines. Therefore, it is quite important to check compliance with guidelines to raise quality of the BIM model. But Quality Checking (QC) items and method for BIM model modeled in accordance with guidelines is not provided. This study suggested QC items and Rule Specifications(RS) for automatic QC. First of all, QC items were derived by analyzing domestic BIM guidelines and a process for structuring natural language is conducted by utilizing flowchart and pseudocode. So, by combining them, RS was suggested. Finally, RS-based case study was conducted by implementing automatic QC process with solibri model checker$^{TM}$. This study will contribute to the improvement of design quality and completeness of BIM model including huge data of 3 dimension. Furthermore, it is necessary to develop BIM guidelines according to the use case and to provide detailed process and standard for QC of BIM model.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.209-217
• /
• 2012

In this paper, I proposed new system that a user makes modeling 3D symmetric pottery using mouse and can confirm the result immediately in internet browser. The main advantage of proposed system is that users who have no specialized knowledge about 3D graphic can easily create 3D objects. And a user can use it that has only PC connected network and mouse without additional devices as like expensive haptic and camera device. For developing proposed system, VRML/X3D that is International Standard language for virtual reality and 3D graphics was used. Because it was born based on internet that is different from other 3D graphic languages, it was able to interact and navigate with users. With those features and high completeness of 3D pottery realization using mouse considered, the system may be useful and is superior in performance to other pottery modeling system.