R.C. 휨부재(部材)의 L.R.F.D. 신뢰성(信賴性) 설계기준(設計基準)에 관한 연구(研究) (A Study on LRFD Reliability Based Design Criteria of RC Flexural Members)
-
- 대한토목학회논문집
- /
- 제1권1호
- /
- pp.21-32
- /
- 1981
최근 구미(歐美) 선진제국(先進諸國)에서는 확률적(確率的)인 개념(槪念)에 의한 한계상태설계법(限界狀態設計法)을 표준시방서(標準示方書)로 도입(導入)하는 경향이 높아지고 있다. 이들 선진국(先進國)에서 채택한 LSD, LRFD, PBLSD 같은 신뢰성설계기준(信賴性設計基準)은 각종(各種) 시공재료(施工材料)에 대한 설계절차(設計節次)를 단순화(單純化)시킬 뿐만아니라 일관성(一貫性)있는 신뢰성(信賴性)을 갖게 하는 능력(能力)을 갖고 있다. 본(本) 연구(硏究)에서는 RC 휨부재(部材)에 대한 이러한 신뢰성설계기준(信賴性設計基準)을 제안(提案)하였다. 이를 위하여 Lind-Hasofer의 불변(不變)2차(次)모멘트 신뢰성이론(信賴性理論)에 의해 반복시행적(反復試行的) 신뢰성해석(信賴性解析) 및 하중(荷重)-저항계수(抵抗係數) 결정(決定)알고리즘을 유도하고, 또한 Cornell의 평균제(平均第)1계이차(階二次)모멘트법(法)을 사용하여 근사적(近似的)으로도 신뢰성(信賴性)을 해석(解析)하여 설계기준(設計基準)을 결정(決定)하도록 하였다. 휨부재(部材)의 저항(抵抗) 및 하중효과(荷重效果)에 대한 불확실양산정(不確實量算定)은 Ellingwood의 하중(荷重) 및 저항불확실량(抵抗不確實量) 해석방법(解析方法)을 따랐다. 현행(現行) 극한강설계시방서(極限强設計示方書) 기준(基準)으로 설계(設計)되는 R.C.휨부재(部材)의 상대적(相對的) 의미(意味)의 안전성수준(安全性水準)을 제안(提案)된 이차(二次)모멘트신뢰성이론(信賴性理論)에 의해 검토(檢討)하였다. 그리고 우리 현실(現實)을 고려한
목적: 본 연구에서는 컴프턴 카메라의 투사데이터를 재구성하기 위하여 부분집합 개수에 비례하여 고속화된 수렴속도를 보이는 통계학적 영상재구성 방법인 OSEM 알고리즘을 적용하였다. 또한 연산시간 및 퍼센트 오차 측면에서 컴프턴 투사데이터의 부분집합 구성 시 여러 구분방법에 대한 비교연구를 수행함으로써 컴프턴 투사데이터의 최적화된 OSEM 알고리즘을 제안하고자 하였다. 대상 및 방법: 산란부와 흡수부로 구성된 컴프턴 카메라의 투사데이터를 재구성하기 위하여 단순역투사, 기댓값 최대화 방법과 OSEM 알고리즘을 구현하였다. 그리고 OSEM의 경우 컴프턴 투사데이터는 산란부 및 흡수부의 검출위치 및 산란각에 따라 부분 집합으로 구분하였다. EM 알고리즘은 64번의 반복연산을 수행하였으며 OSEM은 16개의 부분집합에 대해 4번의 반복연산을 수행하였다. 각 재구성 방법과 부분집합 구분방법에 대한 정량적 성능평가를 위하여 계산 시간과 퍼센트 오차를 측정하였다. 결과: SBP 방법에 비해 모든 통계학적 영상재구성 방법의 결과들이 보다 정확하였다. 64번 반복연산을 수행한 EM 알고리즘에 비해 4번의 반복연산과 16개의 부분집합을 가지는 모든 OSEM 알고리즘은 유사한 퍼센트 오차를 나타내면서 14배 빠른 수렴속도를 보였다. OSEM의 경우, 부분집합의 구분방법에 따라 연산속도와 재구성된 영상의 정확도 면에서는 거의 차이가 없었다. 결론: 본 연구의 실험 결과를 통하여 핵의학 영상 분야에서 사용하는 OSEM 알고리즘이 컴프턴 카메라에 대한 재구성 알고리즘으로 유용함을 확인하였으며 OS-EM 방법은 EM에 비해 유사한 결과영상을 재구성하면서 14배 빠른 수렴속도를 보이며 컴프턴 투사데이터를 부분집합으로 구분 시 검출위치와 산란각을 모두 이용하는 것이 가장 효율적인 것으로 간주된다.NIS와 EGFP의 이중 리포터 유전자를 가지고 있는 HepG2 세포주가 성공적으로 만들어졌다. 세포의 약 50% 정도가 형광 현미경 아래에서 관찰되었다. NIS 유전자의 발현은 역전사효소 중합효소 연쇄반응 실험을 통해서 확인하였고, NIS가 발현된 세포의 방사능옥소 섭취량은 대조군에 비하여 약 9배 정도 높게 나타났다. 방사능옥소 유출량 실험에서는 약 9분에 반 정도의 옥소가 유출되는 것이 확인되었다. 구축된 세포주를 이식한 후 획득한 형광 영상, 감마카메라과 소동물용 PET 영상에서는 반대쪽의 대조군 세포를 이식한 것에 비하여 뚜렷한 형광신호가 보였고, 더 높은 방사능옥소 섭취가 확인되었다. 결론: NIS와 EGFP의 이중 리포터 유전자를 가지는 간암 세포주가 성공적으로 구축되었고, 소동물에서 두 유전자를 각각 치료용 리포터 유전자와 영상 리포터 유전자로의 사용이 가능할 것이라고 생각된다.타내는 중요한 효소로 인정되고 있으며, 조직의 손상, 발암, 염증, 성인병 및 노화 등과 같은 여러 가지 유해 작용을 일으킨다. 정상군에 비해 대조군은 1.74배 수치가 증가되었으며, RCM투여군의 대조군과 비교 시 57.4% 감소되는 효과를 볼 수 있었다. 본 연구는 LPS로부터 유도된 산화적 스트레스에 대한 복분자의 선투여 후 예방효과를 알아보았다. 생약재의 일종인 복분자의 경우 LPS로 유도된 산화적 스트레스 억제 및 지질대사로부터의 개선 효과가 있는 것으로 판단되며 지질과산화에 대해서 강한 억제 활성을 나타내는 것을 알 수 있었다. 이러한 결과로 복분자는 생활 습관병의 예방과 개선에 유효한 것으로 사료되었으며, 지질대사와 과산화지표의 검증을 통해 기능성 식품소재로 활용될 수 있음을 보여주었다.로서 역시 CTV 치료계획에서 적게 조사되었다(p=0.005). 기존의 ICRU 치료계획은
재래시장은 지역의 중심지적인 특성과 문화적인 특성이 고스란히 반영된 지역 거점지이며 인근 지역주민의 상거래라는 1차적 장소적 기능과 사회문화적 측면의 상호 정보문화교류, 커뮤니티 공간 형성으로 유통의 집객시설과 집적시설로서 중요한 역할과 기능을 하고 있다. 5인 이하 가족 단위의 생계형으로 취급상품, 구입방범, 판매방식 등이 전근대적인 경영기법을 통해 한국의 대표적 소매업태로서의 역할을 해오고 있다. 1990년대 이후 신유통업태와 대형할인점 진출로 인해 재래시장은 급격한 경쟁력 상실과 소비자들의 생활수준의 향상, 구매패턴의 변화, 인터넷의 급속한 확산 등 외부적인 유통 환경변화에서 경쟁력을 상실하고 설 자리를 잃어가고 있다. 정부의 지역경제 활성화와 국민경제의 발전 측면에서 고령화된 재래시장에 대한 대책 중 정부의 예산지원 정책으로 환경개선사업, 연구용역, 경영현대화중심의 국고지원 사업은 2001년부터 2004년까지 총 3,853억원의 국고가 지원되었으나 활성화 사업의 실효성에는 아직 정확히 나타나고 있지 않은 상황으로 조사되었다. 또한 지원사업을 추진함에 있어 시장상인리더들의 전문성결여로 종합적인 추진전략과 중장기적 계획수립 및 자발적인 상인들의 합의점 유도 반감으로 지속적인 사업추진방향에 한계점을 나타냈다. 재래시장이 단순히 물건을 사고파는 물리적인 장소적 의미에서 벗어나 새로운 지역 장소적 생활공간으로 커뮤니티적 접근을 통한 장소적 창조전략이 필요하다. 이에 시대적 패러다임 변화에 따른 새로운 사업 방향 전환을 통해 재래시장의 장소적 기능 도입을 동해 문화적 경제적 의미를 지닌 공간으로 재조명을 동해 발전방향을 제시하고자 한다. 재래시장은 지역 기반으로 한 지역생활자들과 자연스럽게 커뮤니티를 상호 형성하고 정보와 지식 공유를 통해 부 창출 공간으로 재생되어야 할 것이다 재래시장이 부 창출 공간으로 재생하려면 시대적 장소적 환경에 맞는 시설과 교류활동을 통찬 상호신뢰구축 활동 속에서 고객이 원하는 방향으로 영업환경도 변화하여야 하며, 지역단위 중심 영국의 TCM, 미국의 BID, 일본의 TMO 등 해외 벤치마킹을 통한 단위 시장상가 점포단위의 점(點)정책에서 선(線)단위의 상가로 환경사업과 거시적인 지역단위중심인 면(面) 정책적 접근을 통한 커뮤니티적인 발상 전환이 필요하다. 국내외 사례비교 분석을 통해 사회적 정책수요 발굴과 기존의 추진방법에 대한 선진사례 연구를 통한 NPO, NGO 등의 시민기업가와 이를 수행키 위한 혁신성과 전문성조정능력을 갖춘 리더자 양성이 무엇보다 중요하다. 특히 지역자원 활용 소스 중심의 문화관린 산업의 seeds 발굴과 향토상품의 상품화와 네트워크 조직망 구축을 위한 지역중심의 복합 생활문화 공간이 필요할 것이며, 이를 촉진키 위한 mentor academy시스템 접근을 통해 점점 고령화되어 가고 있는 재래시장에 대해 차별적 특성이 반영된 종합적이고 체계적 접근 방법연구가 필요하다.
배경: 최근에 완전방실중격결손의 해부학적 구조에 대한 이해가 증가됨에 따라서 본원에서는 수술방법에 있 어서 여러 가지 변형을 시도하게 되었다. 대상 및 방법: 1997년 5월부터 1998년 7월까지 8명의 완전방실중 격결손 환자를 수술하였다. 남녀 각각 3명, 5명이었으며 나이는 2개월에서 28개월까지 분포하였고 평균 몸무 게는 6.0
In this paper, I will examine the variables influencing the Quality of Life of arthritis patients and present basic materials which help arthritis patients have positive thinking in life and ultimately lead a satisfactory life. The subjects for this study are 231 inpatients and outpatients with arthritis living in J and K city in Chonbug Province. For the analysis of collected data I employed the SAS program. The variables for characteristics and the quality of life were analysed by descriptive statistics, T-test and ANOVA, and the relations among variables were analysed through Pearson Correlation; the Regression method was employed to predict the factors affecting quality of life. For the validity of reliance on measuring equipment Cronbach Alpha was used. The results of the study are as follows : (1) The mean score of quality of life of arthritis patients is 3.09(5 in the maximum). The general characteristics which affect the quality of life are age(F=5.13, p=0.0006), standard of education(F=6.49, p=0.0003), marriage status(F=7.77, p=0.0005), monthly pay(F=4.37, p=0.0020), medical benefits (F=4.85, p=0.0087), and supports(F=4.39, p=0.0050). For the disease-related characteristics, there is a significant difference in the 6 items: pain control method(F=5.92, p= 0.0002), physical therapy(F=3.25, p=0.013), whethere or not patients exercise(F=4.62, p=0.0000), regularity of exercise(F=4.79, p=0.0000), frequency of exercise(F=6.29, p=0.0001), and amount of exercise(F=4.62, p=0.0043). Depending on the type of arthritis, there is also a significant difference in the degree of pain felt. The patients with infectious arthritis suffer from pain the most, followed by those with gout, rheumatism and degenerative arthritis, in that order. Although statistics don't show any convincing evidence, those with gout perceive that they are in best health condition, followed by those with rheumatism, degenerative arthritis, and infectious arthritis, in that order(F=2.23, p=0.0669). (2) The quality of life of arthritis patients is correlated positively with perceived health status(r=0.56, p=0.0001), health promoting behavior(r=0.53, p=0.0001), family support (r=0.46, p=0.0001), amount of exercise (r=0.36, p=0.0001), ADL(r=0.36, p=0.0001), HLOC(r=0.32, p=0.0001), frequency of exercise(r=0.32, p=0.0001)in that order, while correlated negatively with the degree of pain felt(r=-0.32, p=0.0001), the number of pain regions(r=-0.19, p= 0.0041), and the duration of pain(r=-0.14, p=0.0279). (3) Regression analysis reveals that the most powerful predictor of the quality of life is perceived health status, which account for 31.11%. The other predictors of the quality of life, which account for 60.22%, are health promoting behavior(16.51%), family support(3.81%), ADL(2.52%), gender(1.86%), the number of family members(1.36%), level of pain(1.24%), duration of pain (1.08%), and level of education(0.67%). The results of the study show that perceived health status and health promoting behavior are the two most important variables. However, considering that the perceived health condition is difficult to control by nursing intervention, it is suggested that the level of expectation for patients, must be decided first, and the health promoting behavior and the family support influencing the quality of life must be taken into account as targets for nursing intervention. As a way of controlling the quality of life, I think that a more comprehensive approach comprising the above important variables along with demographic and general characteristics is needed. I also suggest that we must continue to explore the variables affecting the quality of life and include those variables in nursing intervention.
감은사지 삼층석탑은 신라석탑의 규범을 이루는 시원적인 석탑으로 우리나라 석탑의 대표적인 형식으로 자리 잡고 있음은 잘 알려진 사실이다. 이와 같은 석탑은 석조미술품이면서 석구조물이다. 지금까지는 탑을 이해함에 있어서 조탑사상과 미술사적으로는 깊은 연구와 논의가 이루어져서 양식이나 편년 등은 깊이 있게 연구되었다고 생각된다. 그러나 상대적으로 석조건축물로서의 연구는 아주 미미한 것이 사실이다. 우리나라에서 연구 활동을 하고 있는 많은 석탑전문가들도 대부분이 미술사전공자이고 구조를 이해할 수 있는 공학자는 극히 소수임을 보아도 잘 알 수 있다. 앞으로는 석탑을 이해함에 있어서 미술사 못지않게 구조를 포함한 힘의 전달 등 역학 적인 부분도 검토될 수 있도록 공학적인 면으로도 접근하여 탑을 보다 깊이 있게 그리 고 구조체로서 안전하게 이해하고 안전성도 검토 되어야 할 것으로 생각된다. 탑을 조성한 우리선조들의 기술적인 부분을 곳곳에서 찾아 볼 수 있다. 첫째 : 지대석과 하층기단면석을 한 돌로 만드는 기단부의 작은 부재를 가급적 크게 만들어서 상부 하중으로 인한 부재의 이완과 침하 등 부재 변형을 최소화하기 위 한 것이며, 둘째 : 면석과 탱주의 이음에 있어서 탱주에 턱을 두어 면석을 끼워 맞추는 결구방식을 보면 탱주에 끼워지는 면석부분을 살짝 면접기하여 탱주 턱에 쉽게 끼워지도록 하였다. 이러한 면석 결구방식은 감은사석탑 이후 석탑의 면석 결구방식에서는 찾아보기 어려운 결구방식이다. 셋째 : 각 면에 옥개석과 옥개받침석의 크기를 각기 다르게 하여 상 하 부재의 이음부를 일치하지 않게 하였다. 이는 수직 하중의 분산과 부재의 이완을 방지하기 위 한 것으로 판단된다. 넷째 : 동탑 해체 시 확인된 사항으로 옥개받침의 상면을 평평하게 다듬지 않고 안쪽을 볼록하게 도드라지게 다듬어서 가능한 부재의 무게중심을 석탑의 중심에 가깝도록 고려하였다. 작은 부재를 가급적 크게 만든 것, 상하부재의 이음부를 어긋나게 한 기법과 무게중심을 되도록 석탑중심으로 오도록 한 수법 등은 당시 조탑인들은 상당한 수준의 공학적인 식견을 가지고 구조를 이해하는 기술력이 뛰어났음을 알 수 있다.
Purpose of study; The purpose of this study is specifically classified as two parts. The one is to attempt the chronological annals of Quaternary topographic surface through the study over the formation process of alluvial surfaces in our country, setting forth the alluvial surfaces lower-parts of Han River area, as the basic deposit, and comparing it to the marginal landform surfaces. The other is to attempt the classification of micro morphology based on the and condition premising the land use as a link for the regional development in the lower-parts of Han river area. Reasons why selected the Lower-parts of Han river area as study objects: 1. The change of river course in this area is very serve both in vertical and horizontal sides. With a situation it is very easy to know about the old geography related to the formation process of topography. 2. The component materials of gravel, sand, silt and clay are deposited in this area. Making it the available data, it is possible to consider about not oかy the formation process of topography but alsoon the development history to some extent. 3. The earthen vessel, a fossil shell fish, bone, cnarcoal and sea-weed are included in the alluvial deposition in this area. These can be also valuable data related to the chronological annals. 4. The bottom set conglometate beds is also included in the alluvial deposits. This can be also valuable data related to the research of geomorphological development. 5. Around of this area the medium landform surface, lower landform surface, pediment and basin, are existed, and these enable the comparison between the erosion surfaces and the alluvial surfaces. Approach : 1. Referring to the change of river beds, I have calculated the vertical and horizontal differences comparing the topographic map published in 1916 with that published in 1966 and through the field work 2. In classifying the landform, I have applied the method of micro morphological classification in accordance with the synthetic index based upon the land conditions, and furthermore used the classification method comparing the topographic map published in 1916 and in that of 1966. 3. I have accorded this classification with the classification by mapping through appliying the method of classification in the development history for the field work making the component materials as the available data. 4. I have used the component materials, which were picked up form the outcrop of 10 places and bored at 5 places, as the available data. 5. I have referred to Hydrological survey data of the ministry of Construction (since 1916) on the overflow of Han-river, and used geologic map of Seoul metropolitan area. Survey Data, and general map published in 1916 by the Japanese Army Survbey Dept., and map published in 1966 by the Construction Research Laboratory and ROK Army Survey Dept., respectively. Conclusion: 1. Classification of Morphology: I have added the historical consideration for development, making the component materials and fossil as the data, to the typical consideration in accordance with the map of summit level, reliefe and slope distribution. In connection with the erosion surface, I have divided into three classification such as high, medium and low-,level landform surfaces which were classified as high and low level landform surfaces in past. furthermore I have divided the low level landform surface two parts, namely upper-parts(200-300m) and bellow-parts(
스마트폰이 널리 보급되고 현대인들의 생활 속에 깊이 자리 잡으면서, 스마트폰에서 수집된 다종 데이터를 바탕으로 사용자 개인의 행동을 인식하고자 하는 연구가 활발히 진행되고 있다. 그러나 타인과의 상호작용 행동 인식에 대한 연구는 아직까지 상대적으로 미진하였다. 기존 상호작용 행동 인식 연구에서는 오디오, 블루투스, 와이파이 등의 데이터를 사용하였으나, 이들은 사용자 사생활 침해 가능성이 높으며 단시간 내에 충분한 양의 데이터를 수집하기 어렵다는 한계가 있다. 반면 가속도, 자기장, 자이로스코프 등의 물리 센서의 경우 사생활 침해 가능성이 낮으며 단시간 내에 충분한 양의 데이터를 수집할 수 있다. 본 연구에서는 이러한 점에 주목하여, 스마트폰 상의 다종 물리 센서 데이터만을 활용, 딥러닝 모델에 기반을 둔 사용자의 동행 상태 인식 방법론을 제안한다. 사용자의 동행 여부 및 대화 여부를 분류하는 동행 상태 분류 모델은 컨볼루션 신경망과 장단기 기억 순환 신경망이 혼합된 구조를 지닌다. 먼저 스마트폰의 다종 물리 센서에서 수집한 데이터에 존재하는 타임 스태프의 차이를 상쇄하고, 정규화를 수행하여 시간에 따른 시퀀스 데이터 형태로 변환함으로써 동행 상태분류 모델의 입력 데이터를 생성한다. 이는 컨볼루션 신경망에 입력되며, 데이터의 시간적 국부 의존성이 반영된 요인 지도를 출력한다. 장단기 기억 순환 신경망은 요인 지도를 입력받아 시간에 따른 순차적 연관 관계를 학습하며, 동행 상태 분류를 위한 요인을 추출하고 소프트맥스 분류기에서 이에 기반한 최종적인 분류를 수행한다. 자체 제작한 스마트폰 애플리케이션을 배포하여 실험 데이터를 수집하였으며, 이를 활용하여 제안한 방법론을 평가하였다. 최적의 파라미터를 설정하여 동행 상태 분류 모델을 학습하고 평가한 결과, 동행 여부와 대화 여부를 각각 98.74%, 98.83%의 높은 정확도로 분류하였다.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70