• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.385-394
• /
• 2017

In this study, reaction mechanism and curing characteristics of adhesives formulated with NaOH- and $H_2SO_4$-hydrolyzed chicken feather (CF) and formaldehyde-based crosslinkers were investigated by FT-IR and DSC. In addition, adhesive properties and formaldehyde emission of medium-density fiberboards (MDF) applied with the adhesives were measured. CF-based adhesives having a solid content of 40% and over were very viscous at $25^{\circ}C$, but the viscosity reduced to $300{\sim}660m{\cdot}Pa{\cdot}s$ at $50^{\circ}C$. Consequently, the adhesives could be used as a sprayable resin. Through the FT-IR spectra of liquid and cured CF-based adhesives, addition reaction of methylol group and condensation reaction between the functional groups with the use of formaldehyde-based crosslinkers were identified. From the analysis of DSC, it was elucidated for CF-based adhesives to require a higher pressing temperature or longer pressing time comparing to commercial urea-formaldehyde (C-UF) resin. MDF bonded with CF-based adhesives, which was formulated with 5% NaOH-hydrolyzed CF (CF-AK-5%) and PF of formaldehyde to phenol mole ratio of 2.5 (PF-2.5), and pressed for 8 min had higher MOR and IB than those with other CF-based adhesives. MOR and IB of MDF bonded with the CF-based adhesives regardless of formulation type and pressing time were higher than those with C-UF resin. When the values compared with the minimum requirements of KS standard, IB exceeded the KS standard in all formulations and pressing time, but MOR of only MDF bonded with CF-AK-5% and PF-2.5 and pressed for 8 min satisfied the KS standard. What was worse, 24-TS of MDF bonded with all CF-based adhesives did not satisfied the KS standard. However, MOR and 24-TS can be improved by increasing the target density of MDF or the amount of wax emulsion, which is added to improve the water resistance of MDF. Importantly, the use of CF-based adhesives decreased greatly the formaldehyde emission. Based on the results, we reached the conclusion that CF-based adhesives formulated under proper conditions had a potential as a sprayable resin for the production of wood panels.

• Journal of Life Science
• /
• v.32 no.7
• /
• pp.510-522
• /
• 2022

In this study, to biosynthesize PHA with properties more similar to polypropylene, a Bacillus sp. EMK-5020 strain that biosynthesized poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was isolated from soil. Bacillus sp. EMK-5020 strain biosynthesized PHBV containing 1.3% 3-hydroxyvalerate (3HV) using reducing sugar contained in Makgeolli lees enzymatic hydrolysate (MLEH) as a single carbon source. As the amount of propionic acid, which was added as a second carbon source, increased, the content of 3HV also increased. PHBV containing up to 48.6% of 3HV was synthesized when 1.0 g/l of propionic acid was added. Based on these results, the strain was cultured for 72 hr in a 3 l fermenter using reducing sugar in MLEH (20 g/l) and propionic acid (1 g/l) as the main and secondary carbon sources, respectively. As a result, 6.4 g/l DCW and 50 wt% of PHBV (MLEH-PHBV) containing 8.9% 3HV were biosynthesized. Through gel permeation chromatography and thermogravimetric analysis, it was confirmed that the average molecular weight and the decomposition temperature of MLEH-PHBV were 152 kDa and 273℃, respectively. In conclusion, the Bacillus sp. EMK-5020 strain could biosynthesize PHBV containing various 3HV fractions when MLEH and propionic acid were used as carbon sources, and PHBV-MLEH containing 8.9% 3HV was confirmed to have higher thermal stability than standard PHBV (8% 3HV).

• Journal of Hospice and Palliative Care
• /
• v.1 no.1
• /
• pp.47-55
• /
• 1998

Background : It is almost important therapy modality to control pain for the terminal cancer patients for the last 24 hours because those terminally illed patient deserved to have pain free and peaceful time before death. Physician who is deal with terminal cancer patients for their last 24 hours does not need to worry about drug addiction or other untoward side reactions of pain medications. The purpose of this study was to evaluate if terminally illed cancer patient was given pain medication properly and sufficiently and if there was any different behavior to control pain of terminal cancer patients between medical physicians and surgeons in terms of type, amount and administration route and frequency. Methods : A retrospective chart audit of analgesic type, amount and administration route was performed on the medical recorders of 160 hospitalized terminal cancer patients who had died in the Korea University Medical Center Anam Hospital during the period of July 1, 1994 to June 30, 1995. Patients were classified into 103 patients were cared for by medical physicians and 57 patients were cared for by surgeons. After then, we analysed the difference of pain control pattern between them. Different types and amount of analgesics were converted to a common standard, an oral morphine equivalents(OME) relative to 1mg of oral morphine. Results : 1) The total number of patients was 160, male 102 cases(63.8%), and the female was 58 cases(36.2%) respectively. 2) The mean age was 56.4(${\pm}14.62$) years old and mean admission period was 27.8 days(${\pm}34.85$). 3) The frequent cancer site was stomach 42 cases(26.315), lung and liver 29 cases(18.1%) each, pancreas 10 cases(6.2%) in order 4) 125 out of 160 subjects (78.13%) complained pain, and 66 out of 103(64.08%) and 31 out of 57(54.39%) were treated with analgesics to relieve pain. 50 out of 97(51.55%) were able to continue on oral medication. 5) 86 cases(53.75%) were well oriented 24 hours prior to death. 6) The frequent analgesics for regular basis were long acting form of oral morphine 34 cases(Medical phsicians 24, Surgeons 10), intravenous morphine 26 cases(Medical physicians 20, Surgeons 6) in order, and the most common p.r.n.(pro re nata) analgesics used was intravenous morphine. 7) The mean amount of analgesics on regular basis was 115.41 OME by medical physicians and 52.7 OME by surseons(P<0.05). The mean amount of p.r.n. analgesics was significantly larger in patients are for by surgeons(66.64 OME) than medical physicians 23.49 OME(P<0.01). 8) The mean frequency of administrated number of p.r.n. analgesics was 0.62 times/day on medical part and 1.88 times/day on surgical part (P<0.001). Conclusion : Of the 97 patients with advanced cancer, 51.55% were able to take oral medications in the last day of life. The parenteral analgesics were more frequently used in the patients cared for by surgeons than medical physicians. Over the half of terminal cancer patients were well oriented in the last day of life. Doctor's knowledge and attitude towards pain is very important to mange the pain, effectively.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.559-571
• /
• 2017

This study was conducted to determine the adhesive performances of plywoods affected by layering direction and the amounts of thermoplastic films. The face and back layers of veneer were hardwood species (Mixed light hardwood) and core layer veneer was radiata pine (Pinus radiata D. Don). Thermoplastic film used as adhesive were polypropylene (PP) film and polyethylene (PE) film. Thermal analysis and tensile strength were investigated on each films. As a result, the melting temperature of PP and PE films were $163.4^{\circ}C$ and $109.7^{\circ}C$, respectively, and the crystallization temperature were $98.9^{\circ}C$ and $93.6^{\circ}C$, respectively. Tensile strength and elongation of each films appeared higher on the width direction than length direction. Considering the characteristics of the thermoplastic films, the test for the amount of film used was carried out by layering film to the target thickness on veneer. The effecting of layering direction of film on plywood manufacturing was conducted by laminating in the length and width directions of the film according to the grain direction of veneer. Tensile-shear strength of plywood in wet condition was satisfied with the quality standard (0.7 MPa) of KS F 3101 when the film was used over 0.05 mm of PP film and over 0.10 mm of PE film. Tensile-shear strength of plywood after cyclic boiling exceeded the KS standard when PP film was used 0.20 mm thickness. Furthermore, higher bonding strength was observed on a plywood made with width direction of film according to grain direction of veneer than that of length direction of film. Based on microscopic analysis of the surface and bonding line of plywood, interlocking between veneers by penetration of a thermoplastic film into inner and cracks were observed.

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.1-8
• /
• 1976

One of the most common needle leaf species used in planting in Korea is korean pine (Pinus koraiensis S. et Z.), and jack pine (Pinus banksiana Lamb.) is one of the test species for suitability. The relation of nursery bed density of 2-1 korean pine and 1-1 jack pine was studied at the Kwang Nung Nursery, Central Branch Station of Forest Research Institute, and about 40km north of Seoul. Nursery bed density of 2-1 korean pine, which ranged from 36 to 324 trees per square meters and of 1-1 jack pine, which ranged from 25 to 169 trees per square meters, had a marked effect on caliper, height, dry weight and percent and amount of plantable stock. The soil physical and chemical properties is silt plus clay, 50.55 percent; organic matter, 2.09 percent; total nitrogen, 0.13 percent; available phosphorus, 253.25 ppm; exchangeable potash, 0.46 m.e/100g; and pH, 5.58. As the density of the nursery seedling stand of 2-1 korean pine increases, the average tree height increases (Fig. 1A), but in 1-1 jack pine density do not affect to increase or decrease the average tree height. As the density of nursery bed increases, the average stem caliper (at 2cm above ground line) and dry weight decrease (Fig. 1B), but the decreasing rate is more seriously in 1-1 jack pine than 2-1 korean pine (Fig.5). As increasing the density of nursery bed, the T/R ratio of trees of the test species increase. Also the dry weight of leaf, stem and root parts are decreasing in proportion to the increase of stand density, but the drop rate of jack pine is more rapid than korean pine (table. 1) The patent facts of difference of growth characteristics between 2-1 korean pine and 1-1 jack pine were studied. These facts should be used to select the scale of stand density at the nursery bed or the plantable site. Korean pine is demanded high density, on the other hand in jack pine low density are more suitable to manage the stand density. Stands of comparatively low density had the greatest percentage of high-quality stock, and the stands of high density had less than the high quality trees of low density. An important criterion of the best density is percent and number of high-quality trees produced per square meter of bed area. Stem caliper and stem height of seedling is used in most public nurseries to sort seedling into plantable grades. The stock grade standard has set at 4.5mm caliper and 16cm height of 2-1 korean pine as the minimum desired stem caliper and height. By the result studies, the plantable stock grade standards of 2-1 korean pine used at stem height 16cm and stem caliper 4.5mm from public nurseries should be reformed to stem height 18cm and stem caliper 4.0mm by the growth characteristics and the tree distribution of stem height and caliper of relation to density. For the 2-1 korean pine, best density should be about 160 to 200 trees per square meter according to soil fertility. For the 1-1 jack pine, the suitable standard of plantable stock should be at stem height 25cm and caliper 6mm (at 2cm above ground line) and best density was about 100 to 120 trees.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.553-558
• /
• 2012

A simple new method was developed for the determination of betaine in Fructus Lycii using hydrophilic interaction liquid chromatography with evaporative light scattering detection (HILIC-ELSD). Good chromatographic separation and reasonable betaine retention was achieved on a Kinetex HILIC column ($2.1{\times}100mm$, $2.6{\mu}m$) packed with fused-core particle. The mobile phase consisted of (A) acetonitrile and (B) 10 mM ammonium formate (pH 3.0)/acetonitrile (90/10, v/v). It was used with gradient elution at a flow rate of 0.7 mL/min. The column temperature was set at $27.5^{\circ}C$ and the injection volume was $10{\mu}L$. The ELSD drift tube temperature was $50^{\circ}C$ and the nebulizing gas (nitrogen) pressure was 3.0 bar. Stachydrine, a zwitterionic compound, was used as an internal standard. Calibration curve over $10-250{\mu}g/mL$ showed good linearity ($R^2$ > 0.9992) and betaine in the 70% methanol extract of Fructus Lycii was well separated from other peaks. Intraand inter-day precision ranged from 1.1 to 3.0% and from 2.4 to 5.3%, respectively, while intra- and inter-day accuracy ranged from 100.0 to 107.0% and from 94.3 to 103.9%, respectively. The limit of quantification (LOQ) was $10{\mu}g/mL$ and the recoveries were in the range of 98.2-102.7%. The developed HILIC-ELSD method was successfully applied to quantitatively determine the amount of betaine in fourteen Fructus Lycii samples from different locations, demonstrating that this method is simple, rapid, and suitable for the quality control of Fructus Lycii.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.4
• /
• pp.202-208
• /
• 2001

In Recent results suggested that doping $Ta_2O_5$ with a small amount of $TiO_2$ using standard ceramic processing techniques can increase the dielectric constant of $Ta_2O_5$ significantly. In this paper, this concept is studied using RTCVD (Rapid Thermal Chemical Vapor Deposition). Ti-doped $Ta_2O_5$ films are deposited using $TaC_{12}H_{30}O_5N$, $C_8H_{24}N_4Ti$, and $O_2$ on both Si and $NH_3$-nitrided Si substrates. An $NH_3$-based interface layer at the Si surface is used to prevent interfacial oxidation during the CVD process and post deposition annealing is performed in $H_2/O_2$ ambient to improve film quality and reduce leakage current. A sputtered TiN layer is used as a diffusion barrier between the Al gate electrode and the $TaTi_xO_y$ dielectric. XPS analyses confirm the formation of a ($Ta_2O_5)_{1-x}(TiO_2)_x$ composite oxide. A high quality $TaTi_xO_y$ gate stack with EOT (Equivalent Oxide Thickness) of $7{\AA}$ and leakage current $Jg=O.5A/textrm{cm}^2$ @ Vg=-1.0V has been achieved. We have also succeeded in forming a $TaTi_x/O_y$ composite oxide by rapid thermal oxidation of the as-deposited CVD TaTi films. The electrical properties and Jg-EOT characteristics of these composite oxides are remarkably similar to that of RTCVD $Ta_2O_5, suggesting that the dielectric constant of $Ta_2O_5$ is not affected by the addition of $TiO_2$.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.27-32
• /
• 2014

A doppler shift is generated by moving a transmitter or receiver operated in communication systems. The doppler frequency shift between a transmitter and a receiver or the frequency offset present in transceivers must be removed to get the wanted system performance. FTS is used for preventing an accident from operating abnormally and for guaranteeing public protection. A launching vehicle's initial velocity is very fast in order to escape the earth and the amount of doppler shift is large. Recently many studies to adopt the next generation FTS are ongoing. To introduce new FTS, the effects of doppler shift on the performance of the new FTS must be studied. In this paper the doppler effect caused by launching vehicle's velocity affecting the performance of FTS receiver is investigated into two cases, one is for EFTS as a digital FTS and the other is for FTS using a tone signal. Noncoherent DPSK and noncoherent CPFSK are considered as the modulation methods of EFTS. In the cases of the doppler frequency shift of 200Hz present in EFTS using noncoherent DPSK and noncoherent CPFSK are simulated. Simulation results show that $E_b/N_o$ of 0.5dB deteriorates in the region of near BER of about $10^{-5}$ in RS coding. And there is no performance variation in $E_b/N_o$ or $E_b/N_o$ is worsened about 0.1dB in the same BER region for the case of using convolutional and BCH coding. Quadrature detector used in FTS using tone signals is not influenced by the doppler frequency shift.

• Journal of Biomedical Engineering Research
• /
• v.16 no.2
• /
• pp.231-238
• /
• 1995

Tc-99m-MIBI (Sestamibi) myocardial SPECT along with TI-201 tomographic Imaging has demonstrated wide application and high image quality sufficient for the diagnosis of myocardial perfusion defect, which consequently reflects regional myocardial blood flow. The qualitative values of myocardial SPECT with Tc-99m-MIBI as well ds the quantitative cases depend in some degree on the reconstruction techniques of multiple projections. Filtered backprojection (FBP) Is the common standard method for reconstruction rather than the complicated and time-consuming arithmetic methods. In FBP it is known that the distribution of radioactivity in reconstructed transverse slices varies with the selected litter parameters such as cutoff frequencies and order (Butterworth case) The cutoff frequencies used in clinicAl practice partially remove and decrease the true radioactive distribution and alter the pixel counts, which lead to underestimation of true counts in specific myocardial regions. In this study, we have investigated the effect of cutoff frequencies of reconstruction filter on the artifactually induced perfusion defects, which are often demonstrated near inferior and/or inferoseptal cardiac walls due to the intense hepatic uptake of Tc-99m-MIBI. A computerized method for Identifying the relative degree of artifactual perfusion defect and for comparing those degrees along with the relative amount of hepatic uptake to myocardium was developed and patient images were studied to observe the quantitative degree of underestimation of myocardial perfusion, and to propose some reasonable threshold of cutoff frequency in the diagnosis of perfusion defect quantitatively. We concluded that from the quantitative viewpoint cutoff frequencies may be used as high as possible with the sacrifice of homogeneity of image quality, and those frequencies lower than the common 0.3 Wyquist frequency would reveal severe degradation of radioactive distribution near inferior and/or inferoseptal myocardium when applying Butterworth or low pass filter.

• The Journal of Fisheries Business Administration
• /
• v.29 no.2
• /
• pp.77-96
• /
• 1998

Fisheries products in Korea generally go through three markets, namely the wholesale market at production site (Market A), the wholesale market at consumption site (Market B), and the retail market (Market C), from producers to end consumers. As the products move from Market A through Market B to Market C, the marginal gap of prices asked in these markets demonstrates an apparent relationship. The producers, middlemen, consumers, and governmental departments concerned may influence the marketing prices of fisheries products. This study employing the cointegration theory tries to investigate whether causality of the price-setting among these markets exists and, if any, what it is. The authors have focused their attention on fisheries markets in Pusan, analyzing the long-run equilibrium relationship and causality between the prices of hairtail and squid among markets at different levels. Data used in this study cover the period f개m August 1984 to December 1997 fer hairtail, and the period from May 1989 to December 1997 for squid. The main findings of the study may be summarized as follows: First, regardless of the price time-series of hairtail and squid in individual market, the first difference is necessary fur satisfying the stationary conditions since each time-series is a first integration. This means homogeneous integration of time-series, which is a requirement of the long-run equilibrium of prices at different markets, is satisfied. Second, the study of the long-run equilibrium relationship between the prices at Market A and Market B shows that a long-run equilibrium relationship does exist for selling prices of the two species at Market A and Market B. Third, the ECM (error correction model ) used here to describe the long- and short-run dynamics of price change demonstrates that, in the case of squid, the price change in Market A will lead to a corresponding price change in Market B in the long-run period. In the short-run, however, the price at Market H is not only influenced by the price change in Market A but influence the price at Market A as well, that is, the Prices between Market A and Market B have a feedback effect. It should be stressed that the limitation in data collection, which cover only two species of hairtail and squid, is likely to cause a sampling bias. Nonetheless, we may conclude that a dynamic relation in the formation of prices does exist in view of the transaction amount of species at different markets. It is believed that the conclusion drawn from this study would not only contribute to a long-lasted debate on the direction of causality of price-setting among academic circle and fishing community, but would provide a useful standard for the policy makers in charge of the price-setting of fisheries products as well.