• Journal of Soil and Groundwater Environment
• /
• v.27 no.2
• /
• pp.87-98
• /
• 2022

This study aims to prepare a technical protocol for identifying the source of nitrate in water using nitrogen (δ¹⁵N) and oxygen (δ¹⁸O) stable isotope ratios. The technical processes for nitrate sources identification are composed of site investigation, sample collection and analysis, isotope analysis, source identification using isotope characteristics, and source apportionment for multiple potential sources with the Bayesian isotope mixing model. Characteristics of various nitrate potential sources are reviewed, and their typical ranges of δ¹⁵N and δ¹⁸O are comparatively analyzed and summarized. This study also summarizes the current knowledge on the dual-isotope approach and how to correlate the field-relevant information such as land use and hydrochemical data to the nitrate source identification.

• Economic and Environmental Geology
• /
• v.52 no.1
• /
• pp.107-118
• /
• 2019

Two assertions about the process the formation of the high-purity limestone in the Taebaeksan Basin, categorized into syngenetic and epigenetic origin, are verified on the basis of its oxygen-carbon stable isotopic characteristics. The carbonate rocks sampled from the selective six high-purity limestone mines and several outcrops in the Daegi formation are featured by various colors such as the gray, light gray and dark gray. They show a wide range of oxygen stable isotope ratios (4.5 ~ 21.6 ‰), but a narrow range of carbon stable isotope ratios (-1.1 ~ 0.8 ‰, except for vein calcite), which means that they had not experienced strong hydrothermal alteration. In addition, there is no difference in the range of the oxygen stable isotope ratios by mine and color, and it is similar to the range from surrounding outcrop samples. These results indicate that the effect of the hydrothermal alteration were negligible in the generation of high-purity limestone in deposit scale. Whereas, the carbonate rocks can be divided texturally into two groups on the basis of an oxygen isotope ratio; the massive-textured or well-layered samples (>15 ‰), and the layer-disturbed (or layer-destructed) and showing over two colors in one sample (<15 ‰). In the multi-colored samples, the bright parts are characterized by the very low oxygen stable isotope ratios, compared to the dark parts, implying the increase in brightness of the carbonate rocks could be induced by the interaction between hydrothermal fluid and rock. However, these can be applied in a small scale such as one sample and are not suitable for interpretation of the generation of high-purity limestone as a deposit scale. In particular, the high oxygen isotope ratios from the recrystallized white limestone suggest that hydrothermal fluids are also rarely involved during recrystallization process. In addition, the occurrences of the high-purity limestone orebody strongly support the high-purity limestone in the area are syngenetic rather than epigenetic; the high-purity limestone layers in the area show continuous and almost horizontal shapes, and is intercalated between dolomite layers. Consequently, the overall reinterpretation based on the sequential stratigraphy over the Taebaeksan basin would play an important role to find additional reserves of the high-purity limestone.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.4
• /
• pp.357-362
• /
• 2000

Stable isotope ratios of oxygen and hydrogen were investigated in southern Yellow Sea in August 1997. Salinity showed good positive correlation with ${\delta}^{18}$O and ${\delta}$. The correlation between ${\delta}^{18}$O and ${\delta}$D is good. From the relationship between these parameters, we obtained two lines of conclusion: 1) seawater of study area I in summer is a mixture of Changjiang Water and modified Kuroshio Water; 2) stable isotopes are very useful tracers in studying property and behavior of water masses in the study area. In case when water masses can not be easily distinguished by T-S analysis, the stable isotopes seem to be powerful tools for this purpose.

• Journal of the Korean earth science society
• /
• v.23 no.6
• /
• pp.474-485
• /
• 2002

The object of this study is to investigate the contamination degree and the interpretation of sea water intrusion phenomena with hydrogeochemical and hydrogen-oxygen stable isotope of coastal aquifer in the Gogum area, Korea. The physical characteristics of groundwaters is the neutral pH condition and transitional Redox environments, and groundwater is affected by sea water & surface water. The chemical properties of groundwaters are showing an increase in contamination owing to the sea water intrusion, waste water from the surface and agricultural chemicals. In the case of chloride, 6 samples of the groundwater in the study area are in excess of the drinking water standard. The Piper diagram shows the contamination in GG-4 and 14 by sea water intrusion. GG-3, 7 and 13 dominate the Na-HCO$_{3}$ type water and regional (GG-14) is indicated to dominate the Na-Cl type water such as sea water. According to the Sl (saturation index), sea water is oversaturated with respect to calcite and dolomite, GG-3, 14 and 18 are approaching the saturation state. The hydrogen-oxygen stable isotope ratio of groundwaters originates in the meteoric water, and groundwaters of GG-1, 5 and 14 display high oxygen isotope value due to surface water trespass and sea water intrusion. The result of this study, GG-14 is contaminated by sea water intrusion, groundwaters expected GG-3, 7 and 13 is in progress to artificial pollution and sea water intrusion.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.4
• /
• pp.348-353
• /
• 2008

Oxygen isotope has not been used actively in water mass studies because of difficulties on the analysis though it has advantages as a water mass tracer. The most popular method to analysis the oxygen isotope ratio in water samples is equilibration method: isotopic equilibrium of water with $CO_2$ at constant temperature. The precision of oxygen isotope analysis using commercial automatic $H_2O/CO_2$ equilibrator is ${\pm}0.1%o$. This value is not sufficient for studies in open ocean. The object of this study is to improve the analytical precision enough to apply open ocean studies by modification of the instrument. When sample gas is transferred by the pressure difference, the fractionation which is preferential transportation of light isotope can be occurred since the long transportation path between the equilibrator and mass spectrometer. And the The biggest source of error during the analysis is long distance and large volume of the pathway of sample gas between. Therefore, liquid nitrogen trap and high vacuum system are introduced to the system. The precisions of 14 time analysis of same seawater sample are ${\pm}0.081%o$ and ${\pm}0.021%o$ by built-in system and by modified system in this study, respectively.

• Korean Journal of Food Science and Technology
• /
• v.44 no.4
• /
• pp.401-410
• /
• 2012

This study examines the authenticity discrimination of the circulated honey by using stable isotope ratio methods. In the case of domestic honey, the range of ${\delta}^{13}C$ for the samples labeled as pure honey was about -27- -21‰ at the $C_3$ origin, and the range of that for artificial honey was over -19‰ at the $C_4$ origin. The range of ${\delta}^{13}C$ for all imported honey was over -27- -23‰ originating from the $C_3$ plant. According to the nectar-source, ${\delta}^2H$ and ${\delta}^{18}O$ for domestic honey were significantly different for 6 and 5 groups, respectively. However, we could not explain the detailed relationship as well as the geographical feature of ${\delta}^2H$ and ${\delta}^{18}O$. The difference for ${\delta}^2H$ and ${\delta}^{18}O$ in the wide range of latitude, such as between Australia and Canada, was more or less shown. However, it was difficult to find out the trends of ${\delta}^2H$ and ${\delta}^{18}O$ for imported honey versus the geographical information in the similar latitudinal country.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.1
• /
• pp.65-75
• /
• 2021

We investigated hydrochemical and stable isotope characteristics of groundwater in a large agricultural plain, the Honam plain, to evaluate the adequacy of agricultural water supply. For preliminary assessment for the area, we collected 23 groundwater samples from domestic wells and conducted hydrochemical and water stable isotope analysis. Groundwater in the study area is mainly Ca-HCO3 type resulting from water-rock interactions. Stable oxygen and hydrogen isotopic compositions indicated that recharge water is derived from precipitation while some sampling sites had evaporation signatures. Irrigation water quality using sodium absorption ratio and salinity hazard showed most of the groundwater samples were found to be suitable for irrigation. The groundwater in the southwestern part of the study area was affected by both seawater intrusion and agricultural activities, indicating a higher possibility of groundwater contamination near the coastal areas. Elevated concentrations of nitrate and phosphate ions in the groundwater are considered to be influenced by anthropogenic activities such as fertilizer application. It is expected that this study would be able to provide preliminary information on groundwater quality for agricultural water supply in the Mangyeong-Dongjin watershed.

• Economic and Environmental Geology
• /
• v.21 no.2
• /
• pp.149-164
• /
• 1988

Electrum-sulfide mineralization of the Samgwang and Sobo mines of the Cheongyang Au-Ag area was deposited in two stages of quartz and calcite veins that fill fault zones in granite gneiss. Radiometric dating indicates that mineralization is Early Cretaceous age (127 Ma). Fluid inclusion and sulfur isotope data show that ore mineralization was deposited at temperatures between $340^{\circ}$ and $180^{\circ}C$ from fluids with salinities of 1 to 8 wt. % equiv. NaCl and a ${\delta}^{34}S_{{\sum}S}$ value of 2 to 5 per mil. Evidence of fluid boiling (and $CO_2$ effervescence) indicates a range of pressures from < 200 to $\approx$ 700 bars, corresponding to depths of ${\approx}1.5{\pm}0.3\;km$ in a hydrothermal system which alternated from lithostatic toward hydrostatic conditions. Au-Ag deposition was likely a result of boiling coupled with cooling. Meaured and calculated hydrogen and oxygen isotope values of ore-forming fluids indicate a significant meteoric water component, approaching unexchanged paleometeoric water values. Comparison of these values with those of other Korean Au-Ag deposits reveals a relationship among depth, Au/Ag ratio and degree of water-rock interaction. All investigated Korean Jurassic and Cretaceous gold-silver-bearing deposits have fluids which are dominantly evolved meteoric waters, but only deeper systems (${\geq}1.5\;km$) are exclusively gold-rich.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.15-32
• /
• 2008

The hydrochemical and isotopic (stable isotopes and noble gas isotopes) analyses for hot spring waters, cold groundwaters and surface water samples from the Seokmodo hot spring area of the Ganghwa province were carried out to characterize the hydrogeochemical characteristics of thermal waters and to interpret the source of thermal water and noble gases and the geochemical evolution of hot spring waters in the Seokmodo geothermal system. The hot spring waters and groundwaters show a weakly acidic condition with the pH values ranging from 6.42 to 6.77 and 6.01 to 7.71 respectively. The outflow temperature of the Seokmodo hot spring waters ranges from $43.3^{\circ}C\;to\;68.6^{\circ}C$. Relatively high values of the electrical conductivities which fall between 60,200 and $84,300{\mu}S/cm$ indicate that the hot spring waters were mixed with seawater in the subsurface geothermal system. The chemical compositions of the Seokmodo hot spring waters are characterized by Na-Ca-Cl water type. On the other hand, cold groundwaters and surface waters can be grouped into three types such as the Na(Ca)-$HCO_3$, Na(Ca)-$SO_4$ and Ca-$HCO_3$ types. The ${\delta}^{18}O\;and\;{\delta}D$ values of hot spring waters vary from -4.41 to -4.47%o and -32.0 to -33.5%o, respectively. Cold groundwaters range from -7.07 to -8.55%o in ${\delta}^{18}O$ and from -50.24 to -59.6%o in ${\delta}D$. The oxygen and hydrogen isotopic data indicate that the hot spring waters were originated from the local meteoric water source. The enrichments of heavy isotopes ($^{18}O\;and\;^2H$) in the Seokmodo hot spring waters imply that the thermal water was derived from the diffusion Bone between fresh and salt waters. The ${\delta}^{34}S$ values ranging from 23.1 to 23.5%o of dissolved sulfate are very close to the value of sea water sulfate of ${\delta}^{34}$S=20.2%o in this area, indicating the origin of sulfate in hot springs from sea water. The $^3H/^4He$ ratio of hot spring waters varies from $1.243{\times}10^{-6}\;to\;1.299{\times}10^{-6}cm^3STP/g$, which suggests that He gas in hot spring waters was partly originated from a mantle source. Argon isotopic ratio $(^{40}Ar/^{36}Ar=298{\times}10^{-6}cm^3STP/g)$ in hot spring waters corresponds to the atmospheric value.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.635-649
• /
• 2007

Geochemical composition, stable isotopes $({\delta}^{18}O,\;{\delta}D,\;{\delta}^{34}S)$ and noble gases(He, Ne and Ar) of nine hot spring water and three groundwater for five hot springs(Jukam, Hwasun, Dokog, Jirisan, Beunsan) from the Honam area were analyzed to investigate the hydrogeochemical characteristics and the hydrogeochemical evolution of the hot spring waters, and to interpret the source of sulfur, helium and argon dissolved in the hot spring waters. The hot spring waters show low water temperature ranging from 23.0 to $30.5^{\circ}C$ and alkaline characteristics of pH 7.67 to 9.98. Electrical conductivity of hot spring waters is $153{\sim}746{\mu}S/cm$. Groundwaters in this area were characterized by the acidic to neutral pH range$(5.85{\sim}7.21)$, the wide electrical conductivity range $(44{\sim}165{\mu}S/cm)$. The geochemical compositions of hot spring and groundwaters can be divided into three water types: (1) $Na-HCO_3$ water type, (2) Na-Cl water type and (3) $Ca-HCO_3$ water type. The hot spring water of $Ca-HCO_3$ water type in early stage have been evolved through $Ca(Na)-HCO_3$ water type into $Na-HCO_3$ type in final stage. In particular, Jurim alkaline(pH 9.98) hot spring water plotted at the end point of $Na-HCO_3$ type in the Piper diagram is likely to arrive into the final stage in geochemical evolution process. Hydrogen and oxygen isotopic data of the hot spring water samples indicate that the hot spring waters originated from the local meteoric water showing latitude and altitude effects. The ${\delta}^{34}S$ value for sulfate of the hot spring waters varies widely from 0.5 to $25.9%o$. The sulfur source of most hot spring waters in this area is igneous origin. However, The ${\delta}^{34}S$ also indicates the sulfur of JR1 hot water is originated from marine sulfur which might be derived ken ancient seawater sulfates. The $^3He/^4He\;and\;^4He/^{20}Ne$ ratios of the hot spring waters range from $0.0143{\times}10^{-6}\;to\;0.407{\times}10^{-6}\;and\;6.49{\sim}584{\times}10^{-6}$, respectively. The hot spring waters are plotted on the mixing line between air and crustal components. It means that the He gas in the hot spring waters was mainly originated from crustal sources. However, the JR1 hot spring water show a little mixing ratio of the helium gas of mantle source. The $^{40}Ar/^{36}Ar$ ratios of hot spring water are in the range from $292.3{\times}10^{-6}\;to\;304.1{\times}10^{-6}$, implying the atmospheric argon source.