• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.391-400
• /
• 2016

In satellite operations, stable maneuvering of a satellite's onboard antenna to prevent undesirable vibrations to the satellite body is required for high-quality high-resolution images. For this reason, the onboard antenna's angular rate is typically minimized while still satisfying the system requirement that limits the speed of the onboard antenna. In this study, a simple yet effective method, called the ground station searching method, is proposed to reduce the angular rate of a satellite's onboard antenna. The performance of the proposed method is tested using real flight data from the KOMPSAT-3 satellite. Approximately 83% of arbitrarily selected real flight scenarios from 66 test cases show reductions in the onboard antenna's azimuth angular rates. Additionally, reliable solutions were consistently obtained within a reasonably acceptable computation time while generating an onboard antenna tracking profile. The obtained results indicate that the proposed method can be used in real satellite operations and can reduce the operational loads on a ground operator. Although the current work only considers the KOMPSAT-3 satellite as a test case, the proposed method can be easily modified and applied to other satellites that have similar operational characteristics.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.359-364
• /
• 2002

In case of pn control chart often used in mass production system of plant industry and so on, we could evaluate it's performance by the approximation to normal distribution. It has many differences according to sample sizes and defective fraction, and have disadvantage that needs much samples to use the normal distribution approximation. Existent control charts can not detect the cause of process something wrong because it is taking the sampling intervals of fixed length about all times from the process. Therefore, to overcome this shortcoming we use VSI(variable sampling intervals) techniques in this paper. This technique takes a long sampling interval to have the next sampling point if the sample point is in stable state, and if the sample point is near control lines, it takes short sampling interval because the probability to escape control limit is high. To analyze performance of pn control charts that have existent fixed sampling intervals(FSI) and that use VSI technique, we compare ATS of two charts, and analyze the performance of each control chart by the sample sizes, process fraction defective and control limits that Ryan and Schwertman had proposed.

• 교육녹색환경연구
• /
• 제7권2호
• /
• pp.12-29
• /
• 2008

The problem should be approached in terms of recovering essential functions of technical high school and identification to supply stable and quality human resources in technical sector. An adequate space programming for technical high school is needed to educate effective skills and techniques. Considering the education directions of vocational high school, the article covers principals of technical school's construction plan and directions and, based on this, suggest the way of estimating the scale in construction plan of technical school. Through this research, systematic and reasonable space planning can be possible. The range of this research is based on development directions of society and education and an objective standard in a newly reformed the 7th Stage of Education. In addition, the research is limited to technical high school among kinds of vocational high school. The purpose is to redefine the role of technical school that face identification crisis currently, comparing to the past, and to suggest a more effective space planning. The research limits the space to classes for specialized subjects, a core space for education in technical school among diverse spaces.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권3호
• /
• pp.57-61
• /
• 2015

A Superconducting Fault Current Limiter is an electric power device which limits the fault current immediately in a power grid. The SFCL must be cooled to below the critical temperature of high temperature superconductor modules. In general, they are submerged in sub-cooled liquid nitrogen for their stable thermal characteristics. To cool and maintain the target temperature and pressure of the sub-cooled liquid nitrogen, the cryogenic cooling system should be designed well with a cryocooler and coolant circulation devices. The pressure of the cryostat for the SFCL should be pressurized to suppress the generation of nitrogen bubbles in quench mode of the SFCL. In this study, we tested the performance of the cooling system for the prototype 154 kV SFCL, which consist of a Stirling cryocooler, a subcooling cryostat, a pressure builder and a main cryostat for the SFCL module, to verify the design of the cooling system and the electric performance of the SFCL. The normal operation condition of the main cryostat is 71 K and 500 kPa. This paper presents tests results of the overall cooling system.

• 한국환경과학회지
• /
• 제21권12호
• /
• pp.1449-1454
• /
• 2012

The ion selective microelectrodes (ISME) have been applied to observe the continuous profiles of NO3-N and NH4-N in bulk solutions or biofilms. In order to evaluate the performance and applicability of ion concentration measuring system, the characteristics, such as slope of calibration curve, detection limit and potentiometric selectivity coefficient were investigated. The slopes of calibration curve showed high degree of correspondence for each target ion concentrations. And the detection limits of nitrate and ammonia ion selective microelectrode were 10-4.7 M and 10-4.4 M, respectively. These ion selective microelectrodes were proved that their own performance could be maintained for 16 days after making. NO3-N and NH4-N selective microelectrodes were also adapted to detect the continuous ion profiles of cilia media packed MLE (Modified Ludzack-Ettinger) process. And the monitored nitrate and ammonia ion profiles with the ion selective microelectrode were stable and well corresponded to the results with conventional ion chromatograph. However, the electric potential was unstable until 8 hr because of the unknown noise. The tip shape and performance of the ion selective microelectrode was stably kept over 2 days continuous monitoring.

• 한국어병학회지
• /
• 제27권1호
• /
• pp.67-75
• /
• 2014

Aquaculture drugs have used to prevent disease in aquaculture field for many years. In spite of many advantages, overdose and abuse may cause environmental pollutions and antibiotic resistances. Many countries try to protect the environment, biospecies and food safety. Recently, Korea enact laws and ordinances such as the Aquatic Animal Disease Control Act. The purpose of this act to contribute to the stable production and control system for aquatic diseases. The Maximum residue limits (MRLs) of aquaculture drugs have been established by Ministry of Food and Drug Safety (MFDS) and Drug licensing was in National Fisheries Research and Development Institute (NFRDI) by Aquatic Animal Disease Control Act. There is 750 items in aquaculture drugs and these are classified into 4 group, which is approval, necessary for prescription, unregulated and safety drug, and banned drug. MRLs of 30 items in aquaculture drug have been established by Food Sanitation Act. Future research is required to determine the suitable for abundant varied fishes of drugs for side effects and safety.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권11호
• /
• pp.1627-1633
• /
• 2012

This study was to evaluate the feasibility of recycling the solids separated from swine wastewater treatment process as a fuel source for heat production and to provide a data set on the gas emissions and combustion properties. Also, in this study, the heavy metals in ash content were analyzed for its possible use as a fertilizer. Proximate analysis of the solid recovered from the swine wastewater after flocculation with organic polymer showed high calorific (5,330.50 kcal/kg) and low moisture (15.38%) content, indicating that the solid separated from swine wastewater can be used as an alternative fuel source. CO and NOx emissions were found to increase with increasing temperature. Combustion efficiency of the solids was found to be stable (95 to 98%) with varied temperatures. Thermogravimetry (TG) and differential thermal analysis (DTA) showed five thermal effects (four exothermic and one endothermic), and these effects were distinguished in three stages, water evaporation, heterogeneous combustion of hydrocarbons and decomposition reaction. Based on the calorific value and combustion stability results, solid separated from swine manure can be used as an alternative source of fuel, however further research is still warranted regarding regulation of CO and NOx emissions. Furthermore, the heavy metal content in ash was below the legal limits required for its usage as fertilizer.

• 복식
• /
• 제54권6호
• /
• pp.53-64
• /
• 2004

North Korea's traditional dress(chosun-ot) has developed as follows: right after the liberation(l945). North Korea tried to get rid of Japanese style and empty formalities and vanity, so chosun-ot became simple and practical. And from the Korean war to 1950's North Korea had tried to establish through a restoration of the war and chosun-ot is more easy and simple. For 1960's People became to be interested in their clothes owing to a stable socialistic economy and politics, and tried new style due to the influence of the Korea-Japanese. Since 1972 North Korea has claimed a dictational socialist organization, and constructed its own culture. Therefore North Korea emphasized its own clothing habit. and its garment style developed differently from South Korea. Since 1984 North Korea tried to change its policy dramatically. and chosun-ot has changed to a modern and various style. But on the other hand, traditional style of chosun-ot was more emphasized. North Korea especially tried to succeed its traditional style. it pursued only partial changes by sticking to its original style. And its color to bright and magnificent one with additional ornaments. Because it tried to change the style within the limits of its tradition, traditional dress has a quite fragmentary and flat appearance.

• Bulletin of the Korean Chemical Society
• /
• 제24권12호
• /
• pp.1731-1736
• /
• 2003

The reaction of ${\alpha}$-Benzilmonoxime with palladium(II) produces a green complex in triton X-100 micellar media. Palladium has been determined using zero and first derivative spectrophotometric methods. The absorbances of Pd(II)- ${\alpha}$--benzilmonoxime complex at 441.8 and 677.0 nm in 0.10 M perchloric acid solution were monitored and linear working ranges of 0.3-12.0 and 0.7-20 ${\mu}$g mL$^{-1}$ with detection limits of 0.07 and 0.10 ${\mu}$g $mL^-1$ were obtained, respectively. Also, recoveries in the range of 92.8 to 100.1% and relative standard deviations in the range of 0.4 to 7.1% were obtained. First derivative spectrophotometry has also been applied for palladium determination under the optimum condition. The linear dynamic range of 0.2-24.0 ${\mu}$g $mL^{-1}$ palladium with relative standard deviations of 0.6-6.9% and recoveries in the range of 94.9-102.5% has been obtained by first derivative spectrophotometry. The method shows high selectivity because of the high concentration of acid used, which prevents formation of complexes of ${\alpha}$--benzilmonoxime with the other cations. The palladium complex formed was stable at least one day. The method was successfully applied to the determination of palladium in some synthetic palladium alloys and palladium-charcoal powder.

• Journal of Periodontal and Implant Science
• /
• 제36권4호
• /
• pp.925-938
• /
• 2006

The aim of this study was to systematically investigate the complications of single implant-supported restorations followed more than 5-year. Thirty-five studies were selected for the systematic review. A total of 3932 single implants were included at the beginning of studies. Thirty-one implants were removed before loading and 91 implants after loading. The overall implant loss rate was 3.1 %. Implant losses were concentrated on the period between loading and 2-year follow-up, and, after a stable period, increased after 5-year follow-up. The mean marginal bone loss at single-tooth implants was well within 0.2 mm/year, i.e., acceptable annual bone loss by the implant success criteria. However, considerable amounts of single implants suffered a marginal bone loss at implant more than 0.2 mm/year. Fistula was a frequent biological complication in the early studies. The most frequent technical problem was a screw loosening, but its frequency was reduced after the use of a gold screw and torque controller. Within the limits of this study, the complications of single implants might be underestimated due to the lack of information about the biological and technical complications available in the relevant literature.