• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.862-866
• /
• 2005

For urban watershed models, the ILLUDAS and SWMM are the popular rainfall-runoff models used in Korea. However, combined sewage systems in urban areas produced problems when a flood occured because of the surcharged precipitation amount which drained to the streams directly. Also, the lack of pipe line data and the difficulties of modeling yield inappropriate modeling results in urban runoff analysis. In addition, rainfall-runoff models in urban areas which use channel routing could have inaccurate and complicated processes. In this paper, the MIKE SWMM model has been applied for the stable runoff analysis of urban areas. Watershed and pipe line data were established by using past inundated records, DEM data, and the numerical pipe line data. For runoff modelings, the runoff block was adapted to a basin and the Extran block using dynamic equations was applied to the sewage system. After comparing to models that exist, it is concluded that the MIKE SWMM model produces reliable and consistence results without distorting the Parameters of the model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.309-316
• /
• 2013

Since the solar activity, one of the factors influencing on lunar communication systems, is to reach its maximum occurring at 11-year solar cycle in autumn 2013, the solar burst frequency and strength are expected to increase. The solar burst has an effect on earth magnetosphere and causes malfunction, loss of communication, and breakdown of various types of satellites and probes. These problems give rise to huge economic and physical loss. Therefore, we should analyze the effect of solar burst on lunar communications and minimize the expected loss. In this paper, we perform the analysis of the link model and link performance between a land station and a lunar orbiter under the solar burst for orbiter's survivability and stable communication channel operations.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.1
• /
• pp.57-64
• /
• 1997

$Amino-{\beta}-lactam$ antibiotics are absorbed by the dipeptide transporter in the small intestine. These uptakes are coupled to a proton influx. The inward proton gradient is partly induced by the $Na^+/H^+$ exchanger and calcium ion is involved in control of this antiport. Interaction between ampicillin which is one of the $Amino-{\beta}-lactam$ antibiotics and nifedipine which is one of calcium channel blocking agents was studied in rats in vivo and with rabbit jejunum mounted on the Sweetana/Grass diffusion cells in vitro. Bioavailability of ampicillin was increased significantly when nifedipine was co-administered orally in rats. There were no differences in the distribution phase and the elimination phase when ampicillin was given either alone or with nifedipine intravenously. Conditions for in vitro experiments were determined. The lift rate of $O_2/CO_2$ gas was controlled to 3 bubbles/sec and ampicillin was stable in the Kreb's buffer at pH 6.0. Absorption of ampicillin was the greatest when the completely-stripped serosal membrane was used. Transport of ampicillin from mucosal to serosal side in the rabbit jejunum was enhanced by 32% in the presence of nifedipine (p=0.059). Above results suggest that nifedipine might increase the plasma level of ampicillin via the improved absorption in the intestine rather than the reduction in the elimination or/and alteration in the distribution.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.128-134
• /
• 2003

In this paper, we investigated the degree of compensation for WDM channel signal distortion due to chromatic dispersion, self phase modulation (SPM) and cross phase modulation (XPM) as a function of transmission length using mid-span spectral inversion (MSSI) compensation method. The considered system is $3{\times}40$ Gbps intensity modulation direct detection (IM/DD) WDM transmission system. This system has highly nonlinear dispersion shifted fiber (HNL-DSF) as a nonlinear medium in optical phase conjugator (OPC). We confirmed that the transmission length is more increased by applying MSSI to distorted signal due to chromatic dispersion, SPM and XPM as dispersion coefficient of fiber becomes higher. And the compensation degree of distorted WDM channels due to chromatic dispersion, SPM and XPM becomes better stable as dispersion coefficient of fiber becomes higher.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.11
• /
• pp.1367-1372
• /
• 1988

In this paper, we have optimized the computation of the CSP - LOC (Channel Substrate Planar-Large Optical Cavity) structure to design the gith power (Ga, Al) As/GaAs CSP-LOC laser diode. The parameters of the device on the bases of experimental datas include the effects of the various layer thickness, material absorption coefficients, stripe width and so forth. At active layer ($d_2$)=0.08 um with optical layer ($d_3$)=0.5 um and $d_2$ = 0.1 um with $d_3$ = 0.4 um, we find the narrower beam divergence and stable high power in the lowest-order mode without the phenomenon of spatial hole burning. The results of theoretical computation show good agreement with experimental measurements made on LPE grown CSP-LOC. Finally, we developed an practical program and the program is applicable to the CSP-LOC lasers with any materials.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.103-109
• /
• 2018

One of the 5G goals is provide to high data rates for users moving at high speeds, such as trains. High mobility scenarios such as high speed train (HST) scenarios are expected to be typical scenarios for fifth generation communication systems. As the HST develops rapidly, it is necessary to transmit wireless communication data to train passengers, and the communication speed required by users is gradually increasing. HST users require high network capacity and stable communication services regardless of the location or speed of the HST communication system. Therefore, a transmission frame is constructed for the 5G mobile communication system in the mm band to be used for the fifth generation mobile communication, the HST communication system is implemented, and the performance of the wideband non-stationary MIMO HST channel is analyzed in the HST scenario.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.476-483
• /
• 2009

Recently much attention has been devoted to femtocell's potential to improve indoor cellular coverage and high speed wireless communications. Femtocell based commercial services have been already launched in some countries and standardization activities are actively on-going, there has been concern however over potential issues of interference between femtocells and the micro/macro networks. With universal frequency reuse, the ensuing cross-tier interference causes unacceptable data rate and outage probability, so an analysis of effect of interference in femtocell embedded networks would be necessary for a stable system design. This paper investigates the effect of interference on system performances of femtocell embedded hierarchical cell structure (HCS) networks considering the characteristics of propagation environments. Various channel parameters are specially considered for indoor environments where most of femtocells are deployed to investigate the effect of interference of femtocell embedded RCS networks. System capacity and coverage are provided with variant distance between macrocell and femtocell, location of the user in femtocell coverage, and characteristic of building structures.

• Electrical & Electronic Materials
• /
• v.8 no.1
• /
• pp.56-63
• /
• 1995

MESFETs of the Ti/Au and Ti/Pd/Au gate were fabricated on n-type GaAs. Interdiffusion at Schottky interfaces, Schottky contact properties, and MESFET characteristics with heat treatment were investigated. Ti of Ti/Au contact and Pd of Ti/Pd/Au contact acted as a barrier metal against interdiffusion of Au at >$220^{\circ}C$. Pd of Ti/Pd/Au contact acted as a barrier metal even at >$360^{\circ}C$, however, Ti of Ti/Au contact promoted interdiffusion of Au instead of role of barrier metal. As the heat treatment temperature increases, in the case of both contact, saturated drain current and pinch off voltage decreased, open channel resistance increased, and degree of parameter variation in Ti/Au gate was higher than in Ti/Pd/Au gate at >$360^{\circ}C$ Schottky barrier height of Ti/Au and Ti/Pd/Au contacts was 0.69eV and 0.68eV in the as-deposited state, respectively, and Fermi level was pinned in the vicinity of 1/2Eg. As the heat treatment temperature increases, barrier height of Ti/Pd/Au contact increased, however, decreased at >$360^{\circ}C$ in the case of Ti/Au contact. Ideality factor of Ti/Au contact was nearly constant regardless of heat treatment, however, increased at >$360^{\circ}C$ in the case of Ti/Au contact. From the results above, Ti/Pd/Au was stable gate metal than Ti/Au.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.517-524
• /
• 2004

In this paper, we investigated the compensation characteristics of distorted NRZ format and RZ format signal dependence on dispersion variation of each transmission section in 8-channel WDM system. The WDM system have two transmission sections of unequal length with respect to optical phase conjugator(OPC) position. We select highly-nonlinear dispersion shifted fiber(HNL-DSF) as a nonlinear medium of OPC in order to convert wideband signal waves to conjugated waves. First, we confirmed that RZ is better than NRZ as a modulation format for maintenance or stable performance, when total dispersion or both sections in WDM system is different each other. Also, we confirmed that total dispersion of the short length section must be smaller than that of the long length section in order to excellently compensate for NRZ format signal.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.633-640
• /
• 2011

In this study, the stabilization of an edge flame and the intensity variation of a diffusion branch were investigated using a multi-slot combustor under conditions of high temperature and small fuel-concentration gradient (FCG). The combustor consists of three narrow channels: a quartz channel and two side-heating combustors. For the accuracy of this experimental study, quantitative analysis was carried out for each boundary condition. Stable edge flames could be observed under high-temperature conditions by controlling the FCG and fuel dilution ratio. Moreover, it was found that the intensity of the diffusion flame was increased by increasing the temperature of the mixture. On the contrary, the intensity of the diffusion flame was decreased by increasing the dilution ratio. It was also found that a propane flame is more sensitively affected by these experimental parameters than a methane flame.