• 한국농공학회지
• /
• 제39권1호
• /
• pp.112-121
• /
• 1997

The aim of this study was to analyze the slope stability relating to the failure of cut slopes and the characteristics of stress-strain relations obtained by limit equilibrium method, finite element method, and stereographic projection method for the reinforced cut slopes. The following conclusions were made : 1.To use stereographic projection method led to little possibility to take the toppling and wedge failure while to use the other methods led to the failure. It was recommended to reduce the slope inclination from 1:1 to 1: 1.5~1 :1.8 and adopt coir mesh method to protect the slope surface. position with the horizontal displacement after final excavation moved to the excavation base. The maximum shear strain values concentrated at the excavation base indicated the possibility to induce the local failure. 3. It was recommended that the slope inclination for blast rock with the slope height larger than l0m was 1: 0.5, 1:1, and 1: 1~1 :1.5 for hard rocks, soft and ordinary rocks, and ripping and soils, respectively. 4. Berm width criteria for blast rock with the slope height larger than l0m were recommended as follow : 2~3m per 20m slope height for hard rocks, 1 ~2m per l0m slope height for soft and ordinary rocks, 1 ~ l.5m per 5m slope height for ripping and soils.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.107-112
• /
• 2005

Road is built continuously along with development of industry and cut slope is happened necessarily in road construction. Geoengineers are executing cut slope stability analysis considering various cut slope condition such as topography, geology, hydraulic condition and so on. The Tertiary Jungja Basin is located in the southeastern coastal area of the Korea Peninsula. Jungja Basin area is created by geotectonic movement of the plate after Early Miocene epoch. The northwestern and southwestern boundary of the basin is fault zone. The Basement rock is hornfels (Ulsan Formation). Basin-fills consist of extrusive volcanic rock(Tangsa Andesites), unconsolidated fluviatile conglomerate(Kangdong Formation) and shallow brackish-water sandstone(Sinhyun Formation). The characteristics of cut slopes in this area is different with cut slopes in the other site. Soil layers in this area is unconsolidated sediments and is not formed the weathering and erosion of the rock. So, the depth of soil layer is very thick. Faults of this area are northwest-southeast and northeast-southwest direction. Expandible clay mineral as smectite, chlorite et al. detected from fault gouge using XRD. Therefore, Jungja Basin area must consider the characteristics of the faults and soil layers thickness necessarily cut slopes stability analysis.

• 한국지반신소재학회논문집
• /
• 제16권4호
• /
• pp.139-149
• /
• 2017

석굴암이 발견된 이후 수행된 그간의 정비 및 보수 보강 사업과 구조안정성 평가는 주로 석굴암의 석재와 콘크리트 돔 구조체의 상태 점검을 위주로 진행되어 왔다. 그러나, 석굴암 배면에는 높이 12m의 암반비탈면이 위치하여 비탈면 붕괴나 낙석 등의 발생이 우려되고, 이는 석굴암의 안정을 저해하는 요인이 될 수 있다. 또한 석굴암 측면 및 전면부의 토사비탈면과 석축의 경우도 최근 빈번해지고 있는 국지성 호우와 지진의 영향으로 장기적으로 안정성을 확보하고 있는지 의문시된다. 이에 본 연구에서는 석굴암 주변 지반과 비탈면에 대한 상세 현장조사를 통해 지형 및 지질학적 위험요인들을 파악하고, 안정성 해석을 통해 석굴암 배면의 노출암반 및 전면부 비탈면과 석축 등의 구조적 안전성을 검토하였다.

• Geomechanics and Engineering
• /
• 제31권1호
• /
• pp.71-86
• /
• 2022

In Taiwan, an efficient approach for enhancing the stability of colluvium slopes is the drilled shaft method. For slopes with drilled shafts, the soil arching effect is one of the primary factors influencing slope stability and intertwines to the failure mechanism of the pile-soil system. In this study, the contribution of soil arching effect to slope stability is evaluated using the FEM software (Plaxis 3D) with the built-in strength reduction technique. The result indicates the depth of the failure surface is influenced by the S/D ratio (the distance to the diameter of piles), which can reflect the contribution of the soil arching effect to soil stability. When α (rock inclination angles)=β (slope angles) is considered and the S/D ratio=4, the failure surface of the slope is not significantly influenced by the piles. Overall, the soil arching effect is more significant on α=β, especially for the steep slopes. Additionally, the soil arching effect has been included in the proposed stability charts. The proposed charts were validated through two case studies, including that of the well-known Woo-Wan-Chai field in Taiwan. The differences in safety factor (FoS) values between the referenced literature and this study was approximately 4.9%.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 사면안정 설계 및 시공 특별강연회
• /
• pp.19-30
• /
• 2001

This paper represents a case study to determine optimal rock properties and to analyse the safety of slopes excavated in faulted and severly weathered ground. The study site consists of two slopes with a length of 240m and a height of 30m in contact with a tunnel. Significant efforts have been exerted for determining the proper strength parameters such as cohesion and internal friction of rockmass by back analyses as well as laboratory and in-situ tests. Limit equilibrium analyses have also been conducted using these properties.

• Geomechanics and Engineering
• /
• 제2권2호
• /
• pp.125-140
• /
• 2010

Slope stability analysis of the right abutment of a railway bridge proposed at about 350 m above the ground level, crossing a river and connecting two huge hillocks in the Himalayas, India is presented in this paper. The site is located in a highly active seismic zone. The rock slopes are intensely jointed and the joint spacing and orientation are varying at different locations. Static slope stability of the rock slope is studied using equivalent continuum approach through the most commonly used commercial numerical tools like FLAC and SLOPE/W of GEOSTUDIO. The factor of safety for the slope under static conditions was 1.88 and it was reduced by 46% with the application of earthquake loads in pseudo-static analysis. The results obtained from the slope stability analyses confirmed the global stability of the slope. However, it is very likely that there could be possibility of wedge failures at some of the pier locations. This paper also presents the results from kinematics of right abutment slope for the wedge failure analysis based on stereographic projections. Based on the kinematics, it is recommended to flatten the slope from 50o to 43o to avoid wedge failures at all pier locations.

• 한국지반신소재학회논문집
• /
• 제7권2호
• /
• pp.31-39
• /
• 2008

본 연구에서는 대도시사면 통합관리시스템 구축을 위하여 부산 백양산 지역의 절개사면에 대한 현황을 조사하였다. 절개사면에 대한 특징들을 기록할 수 있는 조사용 사면시트를 작성하였으며, 조사시트에는 사면정보를 체계적으로 기재할 수 있도록 하였다. 부산 백양산 일대의 절개사면은 총 103개소로서 대부분이 옹벽과 사면으로 이루어진 사면(CR)이며, 절개사면에 인접하고 있는 시설물로는 학교가 가장 많은 것으로 조사되었다. 부산 백양산 일대 절개사면의 평균 연장길이는 약 122m, 평균높이는 약 18m이고, 혼합사면이 가장 많이 분포하고 있다. 사면의 안정성 확보를 위하여 대부분 사면하단부에 옹벽이 설치되어 있으며, 옹벽 및 절개사면의 추가적인 안정성을 확보하기 위하여 앵커공, 배수공, 낙석방지공, 식생공 등이 보강되어 있음을 알 수 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.491-498
• /
• 2005

Acid Rock Drainage(ARD) is the product formed by the atmospheric(i.e. by water, oxygen and carbon dioxide) oxidation of the relatively common iron-sulphur minerals pyrite($FeS_2$). ARD causes the acidification and heavy metal contamination of water and soil and the reduction of slope stability. In this study the generation characteristics and the prediction of ARD of various road cut slopes were studied. An attempt to classify the rocks into several groups according to their acid generation potentials was made. Acid Base Accounting(ABA) tests, commonly used as a screening tool in ARD predictions, were performed. Sixteen rock samples were classified into PAF(potentially acid forming) group and four rock samples into NAF(non-acid forming) group. The chemical analysis of water samples strongly suggested that ARD with high content of heavy metals and low pH could pollute the ground water and/or stream water.

• 터널과지하공간
• /
• 제28권6호
• /
• pp.569-583
• /
• 2018

본 연구는 경상남도 일대의 도로 및 산업단지 시공과정에 발생된 암반사면에 대하여 현장조사 및 기존 조사자료 등을 토대로 붕괴를 일으키는 여러 가지 요인들을 분석하여 붕괴 특성을 파악하고자 하였다. 직접 조사한 사면가운데 붕괴가 발생한 사면의 경우 붕괴특성을 분석하여 붕괴사면 자료의 계속적인 수집 및 데이터베이스 구축과 관리 및 분석을 통해 붕괴사면 예측 및 예방에 활용할 수 있을 것이다. 절토사면의 붕괴특성에 사용된 평가항목은 여러 가지 요인들 중에 기존에 사면 안정성 평가에 많이 사용된 평가항목을 비교하여 중복되는 요소들 중에 객관적인 평가항목으로 볼 수 있는 항목을 선택하여 사용하였다. 암반사면의 파괴유형은 기반암의 암종에 따라 평면파괴, 쐐기파괴, 원호파괴, 전도파괴 등의 양상이 다르게 발생하므로 사면의 안정성을 검토할 경우 반드시 지표지질 조사를 실시하여 기반암의 암종을 분석한 후 그에 따른 사면의 안정성 해석을 수행하여야 한다.

• 한국지반공학회지:지반
• /
• 제14권2호
• /
• pp.55-66
• /
• 1998

본 논문의 목적은 불연속면의 공학적 특성, 사면형상과 하중조건 등을 고려한 암반사면 전도 파괴에 대한 안정해석방법을 개발하고 적용하는테 있다. 암반사면의 전도파괴에 대한 안정은 경사각 $\alpha_s$ 와 H/t비에 주된 영향을 받는다. 설계적용을 위하여 매개변수에 따른 My띠와 $\alpha$서 함수로 표현되는 암반사면 전도파괴에 대한 안정도표를 작성하였다. 안정도표에서 $\alpha_s$와 Hy띠가 작아질수록 안정성이 증가하는 경향을 보인다. 안정도표에서 안정영역은 간극수압변화에 따라 가장 크게 감소한다. 파괴영역의 변화는 지진력과 단계각에 가장 민감하다.