• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.374-377
• /
• 2009

Glass fiber reinforced nylon has been used in many plastic industries. Mechanical properties of reinforced plastics depend upon types of glass fiber as well as loading of glass fiber. Tensile properties of glass fiber reinforced nylon66 have been studied for different glass fiber types and sizes. Types of glass fibers were circular and flat, and diameters were 7, 10, and 13 micrometers. Orientations of glass fibers in the matrix of nylon66 have been analyzed through X-ray CT. Tensile specimens were prepared by cutting out of square plates of $100{\times}100{\times}3mm$ with different angles such as 0, 45, and $90^{\circ}$ to the flow direction. As the loading of glass fiber increases to 45 wt% tensile strength increases up 2.5 times compare with neat nylon66. Anisotropic tensile strength has been observed and minimum tensile strength was measured in the specimen cut from perpendicular to the flow direction.

• 대한토목학회논문집
• /
• 제26권4A호
• /
• pp.677-687
• /
• 2006

크리깅 보간법은 지구통계학 분야에 주로 사용되는 보간법의 하나이다. 이 방법은 실험적 베리오그램과 이론적 베리오그램의 작성과 크리깅 보간법의 정식화에 관한 연구를 포함하고 있다. 종래의 응력복구를 위한 최소제곱법과 대조적으로, 가우스적분점에서의 응력데이타로부터 준정해를 얻기 위해 가중 최소제곱법에 기초를 둔다. 즉, 동일한 가중치를 사용하는 종래의 방식들과는 달리 가우스적분점에서의 응력값의 보간을 위하여 베리오그램 모델링을 통한 가중치가 결정된다. 한편, 분할된 요소망에 Zienkiewicz와 Zhu에 의해 제안된 SPR기법에 기초를 둔 사후오차평가를 통해 p-차수를 균등 또는 선택적으로 증가시키는 자동체눈 방식이 도입되었다. 이 방법의 정당성을 보기위해 인장력을 받는 개구부를 갖는 평판문제를 해석하였다. 또한, 기존의 최소제곱법과의 비교를 통한 크리깅보간법의 정당성을 보여 주었다.

• 대한디지털의료영상학회논문지
• /
• 제11권1호
• /
• pp.5-13
• /
• 2009

There are several reasons to take X-ray in case of inpatients. Some of them who cannot ambulate or have any risk if move are taken portable X-ray at their wards. Usually, in this case, many other people-patients unneeded X-ray test, family, hospital workers etc-are indirectly exposed to X-ray by scatter ray. For that reason I try to be aware of free space scatter dose accurately and make the point at issue of portable X-ray better in this study. kVp dose meter is used for efficiency management of portable X-ray equipment. Mobile X-ray equipment, ionization chamber, electrometer, solid water phantom are used for measuring of free space scatter dose. First of all the same surroundings condition is made as taken real portable X-ray, inquired amount of X-ray both chest AP and abdomen AP most frequently examined and measured scatter ray distribution of two tests individually changing distance. In the result of measuring horizontal distribution with condition of chest AP it is found that the mAs is decreased as law of distance reverse square but no showed mAs change according to direction. Vertical distribution showed the mAs slightly higher than horizontal distribution but it isnt found out statistical characteristic. In abdomen AP, compare with chest AP, free space scatter dose is as higher as five-hundred times and horizontal, vertical distribution are quite similar to chest AP in result. In portable X-ray test, in order to reduce the secondary exposure by free space scatter dose first, cut down unnecessary portable order the second, set up the specific area at individual ward for the test the third, when moving to a ward for the X-ray test prepare a portable shielding screen. The last, expose about 2m apart from patients if unable to do above three ways.

• 화약ㆍ발파
• /
• 제34권4호
• /
• pp.1-9
• /
• 2016

수중 강재 절단을 위해 내압성, 유연성의 외부장치인 스프링 호스와 가소성 성형폭약을 결합한 수중 성형폭약 장치를 고안하였다. 최적조건 설계를 위한 기초실험으로 외부장치의 형상에 따른 관입성능을 비교하였다. 실험결과를 평가하기 위하여 관입 된 강재에 액상 고무를 이용하여 모형을 획득한 후 이미지 분석을 하였고, 성형폭약의 관입 과정을 모사하기 위해 AUTODYN 프로그램을 이용하여 해석하였다. 분석결과 원형 및 사각 외부장치의 평균 관입 깊이는 유사하였으나 관입품질은 원형의 경우 더 균일하였다. 또한, 사각의 경우 침투현상이 발생하였고, 수압증가에 따른 변위가 원형대비 크게 측정되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.589-592
• /
• 2003

In the machining process of micros shape by using high-precision machining system and micro end-mill, it is important for machining characters of tools to be grasped in order to stably use tools of micro end-mill. In this study. we carried out an analytical experiment of basic machining features by using end-mill tools for the purpose of damage prevention and manufacture of high quality when the tools of micro end-mill are used. This experiment used a micro machining system with high precision and a variety of end-mill tools commercialized from tens to hundreds microns in diameter. To establish an optimal machining condition without tool damage, cutting force was analyzed according to the changes of tool diameter and cutting conditions such as cutting speed. feed rate, depth of cut. And an examination was performed for the shape and surface illumination of machining surface according to the changes of machining conditions. Based on these micro machining conditions, micro square pillar, cylinder shaft. thin wall with high aspect ratio, and micro 3-D structures such as micro gear and fan were manufactured.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.240-247
• /
• 2006

Piezoelectric sensor-based health monitoring technique using a two-step support vector machine (SYM) classifier is discussed for damage identification of a railroad track. An active sensing system composed of two PZT patches was investigated in conjunction with both impedance and guided wave propagation methods to detect two kinds of damage of the railroad track (one is a hole damage of 0.5cm in diameter at web section and the other is a transverse cut damage of 7.5cm in length and 0.5cm in depth at head section). Two damage-sensitive features were extracted one by one from each method; a) feature I: root mean square deviations (RMSD) of impedance signatures and b) feature II: wavelet coefficients for $A_0$ mode of guided waves. By defining damage indices from those damage-sensitive features, a two-dimensional damage feature (2-D DF) space was made. In order to minimize a false-positive indication of the current active sensing system, a two-step SYM classifier was applied to the 2-D DF space. As a result, optimal separable hyper-planes were successfully established by the two-step SYM classifier: Damage detection was accomplished by the first step-SYM, and damage classification was also carried out by the second step-SYM. Finally, the applicability of the proposed two-step SYM classifier has been verified by thirty test patterns.

• 복식
• /
• 제1권
• /
• pp.101-117
• /
• 1977

This thesis is a study of the Simui(深衣) system which was a dress regulation peculiar to old China with skirt and coat. The origin of Simui is a very long time, that is, before Ju dynasty in China. Its wearing range had a large circle irrespective of rank and good or bad luck. This was a ordinary dress to the Emperor or the lords, a below court attire or a below sacrificial rites attire to the illustrious officials, and good luck dress to the common people. But this was a funeral rites attire or coming-of-age ceremony attire in domestic behaviour. In the times of Song dynasty, lots of confucian scholars had put on this simui because of Juhi's recommendation for domestic behaviour. This Simui had been put on through all the times of China and was the original text of all the dress. Especially the court attire and silkworm working dress of Empress, and the court attire and underwear court attire of Emperor is also made out of this Simui, therefore this is a origin of the ceremonial dress which formed into long coat. In Korea it is said that this Simui was brought in prior to the middle of Goryeo dynasty. But we can't tell the correct transmitted age. According to the following records in Goryeo History, "King had put on the Simui as a sacrificial rite attire in the times of Yejong". It is sure that this Simui was brought in prior to the times of Yejong. In fact, lots of confucian scholars had put on the Simui since the introduction of confucianism in the end of Goryeo dynasty and after that time this was taken by many confucian scholars through Yi dynasty. Korean Simui system was complied with Chinese system through confucian domestic behaviour, This was respected for court dress of confucian scholars, as it were, Chumri, (an ordinary dress of scholars), Nansam (a uniform of upper student), and Hakchangui (a uniform of confucian student). There are many deta about Simui system in the book of Yeki, chapter Okcho and Simui, and other many canfucian books. But we didn't demonstrate the theory about it till now. Especially there are diversifies of opinions about the phrase of "Sok Im Ku Byun" in Yeki. Simui was cut in separate and then was stitched together in one piece. Generally its shape had round sleeve and angled lapel, its length reaches to the anklebone. And it has a line around the lapel, the sleeve band, and the edge of skirt. It is called Simui because the body can be wrapped deeply in broad width and large sleeve. The Simui was made of white fine linen and was cut by the natural size of body. Every part of Simui had a profound meaning; the round sleeve in compliance with regulation can keep a courtesy when a walker moves his hands and the angled lapel like a carpenter's square in compliance with square keeps them front loosing their Justice and a string of the back also keeps them loosing from their righteousness and the flat lower part of Simui makes their heart and mind calm. This Simui was usually attendant on a head cover and belt made cloth, and black shoes. This thesis was made a study of documents and portrait from Yi dynasty, for the actual object was not obtained.

• 한국콘텐츠학회논문지
• /
• 제12권8호
• /
• pp.29-36
• /
• 2012

CCPM 기법에서는 프로젝트 버퍼의 크기를 결정하기 위해 일반적으로 자르고 붙이는 방법과 루트-제곱하는 방법을 사용한다. 하지만 이러한 방법은 프로젝트의 특성을 고려하지 않고 고정된 공식을 통해서만 계산하기 때문에 버퍼의 크기가 너무 커지거나 작아지는 경우가 자주 발생했다. 본 논문에서는 위의 문제점을 해결하기 위해 이전 작업의 결과를 통계 분석하여 각 작업자에 대한 각 임무의 종류에 따른 작업의 특징을 파악하고 이를 CCPM 기법에 활용하여 해당 특징을 기준으로 버퍼 크기를 산정하는 새 방법을 제시하였다. 몬테카를로 시뮬레이션 환경에서 임무의 수, 임무의 어려운 정도 등의 요소를 반영하여 나온 결과를 비교분석 해서 본 논문에서 제안한 방법이 기존의 방법에 비해 임무 수와 상관없이 안정된 완공확률을 유지할 수 있음을 확인하였다. 또한 특정 작업자가 일찍 완공할 수 있는 임무들의 경우 제안한 방법은 기존 방법보다 버퍼의 크기를 더 단축하는 것을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제18권3호
• /
• pp.53-68
• /
• 1990

This research has been executed for maximization of lumber yield and more efficient use of small diameter logs. Sample logs from thinnings carne from densed artificial stands at the Kwangnung Experimental Forests situated in the central region of Korean peninsula. Species of sample logs were obtained to execute sawing and strength test for larch, and lumber strength test in full size for pitch pine and Korean pine. A survey on sawmills consuming domestic logs was carried out to know sawmill production, costs and utilization structure of lumber as a guide to business analysis. Results showed that sawing pattern from small logs less than 15cm in diameter was necessary to cut 9cm by 9cm square per one log in order to obtain high lumber recovery and provide for wide market needs. The total lumber yield of squares plus side boards was 56 percent to 58 percent from small logs and the yield for log sweep in 30 percent decreased by 24.5 percent in sawing production, compared to yield for straight logs. In sawing efficiency, production of lumber by twin band saw could be improved 238 percent higher than lumber of the same species produced by conventional sawmilling methods, and sawing accuracy with twin band saw was much higher at the lumber production than band saw. Lumber from the small larch logs has shown 70 knots per $m^2$ on its faces and also lumber showed lots of face checkings by air drying on the yard, compared to other species. MOR in bending of lumber in full size from small logs of larch was found ranging from 380kg/$cm^2$ to 460kg/$cm^2$, resulting in 40 percent less than the strength from clear small specimens. In lumber containing knots, cross grain, etc, longitudinal stress wave speed was delayed about 48 percent by defects in lumber from both larch and pitch pine logs. The surveyed sample sawmills consumed the domestic logs at the rate of 54 percent to 84 percent in the total timber consumption, showing high consumption at mills located in the mountains.

• 패션비즈니스
• /
• 제15권4호
• /
• pp.122-134
• /
• 2011

The peanut-shaped cloth diaper has cut uncomfortable crotch region off the square-shaped cloth diaper into a peanut-shape, and finished the edge by bias with multi-layers of fabric. This study has the purpose on providing the basic data for designing the peanut-shaped cloth diaper. For this purpose, the peanut-shaped cloth diapers on market were collected and analyzed by their shape and size, and also the patterns and differences in making were compared. 26 products from 17 brands were collected as samples. The analysis factors are the shape and size of the peanut-shaped cloth diaper, and characteristics and patterns in making. Among the samples, only 3 diapers were straight-shaped; the rest of them were peanut-shaped. The size difference between the big and small peanut-shaped cloth diapers was very large; the total length of the small one was 36.5cm-39cm which was very common, and the total length of the big one was more than 44cm. All diapers had longer width in the back than the front. The width of the front and back was different for each sample, therefore, it seemed to have some difficulties to set the standard. The peanut-shaped cloth diaper had different make-up depending on its characteristics including. absorbance, washing and drying. It was usually made by cotton woven of diamond jacquard or knit, and finished the edge by woven bias or knit bias. The peanut-shaped cloth diapers were various including a sheet of diaper, two sheets of diapers fixed with velcro, three sheets of diapers, and etc. For the patterns of the diapers, only two samples out of all had three dimensional shape, and the rest were produced using flat shape. There were no distinction between the diapers of girls and boys. Therefore, it is necessary to make the product based on scientific data about the peanut-shaped cloth diaper.