• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.56-62
• /
• 2011

In this study, a method for the press forming of rectangular aluminium tube has been proposed. Rectangular aluminium tube has high stiff as the cold steel which can be lighter over 30% weight. It is increased every year by being recycled over 80%. Press die consists of punch, wing-die and holder for aluminium tube bending. When punch is applied with aluminium tube, holder is operated as same punch and wing-die is rotated through hinge. Stress-strain relations and springback are considered by bending angle of aluminium tube. In this study, the behaviors on tubes of square aluminium and rectangular aluminium with different thickness and area are established by the analysis of $DEFORM^{TM}$-3D program. Reducing fuel consumption is expected by using the aluminium tube deformation and it becomes the lightweight through recycling.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.16 no.2
• /
• pp.70-76
• /
• 2008

The effects of the inclined perforated baffles on the distributions of the local heat transfer coefficients and friction factors for air flows in a rectangular channel were determined for Reynolds numbers from 23,000 to 57,000. Four different types of the baffle are used. The inclined baffles have the width of 19.8cm, the square diamond type hole having one side length of 2.55cm, and the inclination angle of $5^{\circ}$, whereas the corresponding channel width-to-height ratio was 4.95. Results show that the heat transfer and friction factor depend significantly on the number of baffle holes and Reynolds number. The friction factor decreases with increasing Reynolds number and the number of holes on the baffle, and the heat transfer performance of baffle type II (3 hole baffle) has the best value.

• Advances in concrete construction
• /
• v.3 no.3
• /
• pp.161-185
• /
• 2015

FRP confining is a widely used method for seismic retrofitting of concrete columns. Several studies investigated the stress-strain behavior of FRP confined concrete prisms with square and rectangular sections both experimentally and analytically. In some studies, the monotonic stress-strain behavior of confined concrete was investigated and compressive strength models were developed. To study the reliability of these models, thorough statistical tests are required. This paper aims to investigate the reliability of the presented models using statistical tests including t-test, wilcoxon rank sum test, wilcoxon signed rank test and sign test with a level of significance of 5%. Wilk Shapiro test was also employed to evaluate the normality of the data distribution. The results were compared for different cross section and confinement types. To see the accuracy of the models when there were no significant differences between the results, the coefficient of confidence was used.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.351-355
• /
• 2003

In this paper, rectangular patch antenna is miniaturized by changing the middle of patch into narrow microstrip line except the edges of the patch where the fringing field occurs. Miniaturized rate, gain, bandwidth, radiation pattern of suggested antennas were compared with general square and rectangular microstrip antennas by using simulator Ensemble. As a result, it reduces the dimension of antenna by 44 % and improves the characteristic of x-pol by 40 dB as an advantage when compare with square microstrip antenna while it reduces bandwidth.

• Journal of Korean Society of Forest Science
• /
• v.4 no.1
• /
• pp.26-29
• /
• 1965

1. The purpose of this study was to find out the best sampling form and sampling unit in forest survey. 2. The value of small sampling unit was over estimated in comparison with that of large sampling unit. 3. The value of circular form was over estimated in comparison with that of the others. 4. The smallest unit for estimation in area sampling were as follows. a) 0.06 ha. in the rectangular plot. b) 0.08 ha. in the square plot. c) 0.10 ha. in the circular plot. 5. Conclusion was as follows. The best sampling unit was 0.06 hectoare in the rectangular plot, which was most economic above all and gave preferable result for in the forest survey.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1796-1809
• /
• 2021

The subchannel of a research reactor used to generate high power density is designed to be narrow and rectangular and comprises plate-type fuels operating under downward flow conditions. Critical heat flux (CHF) is a crucial parameter for estimating the safety of a nuclear fuel; hence, this parameter should be accurately predicted. Here, machine learning is applied for the prediction of CHF in a narrow rectangular channel. Although machine learning can effectively analyze large amounts of complex data, its application to CHF, particularly for narrow rectangular channels, remains challenging because of the limited flow conditions available in existing experimental databases. To resolve this problem, we used four CHF correlations to generate pseudo-data for training an artificial neural network. We also propose a network architecture that includes pre-training and prediction stages to predict and analyze the CHF. The trained neural network predicted the CHF with an average error of 3.65% and a root-mean-square error of 17.17% for the test pseudo-data; the respective errors of 0.9% and 26.4% for the experimental data were not considered during training. Finally, machine learning was applied to quantitatively investigate the parametric effect on the CHF in narrow rectangular channels under downward flow conditions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.1
• /
• pp.65-72
• /
• 1994

Collapse characteristics of thin-walled hatted section tubes are investigated. The square section members with flanges are substituted by the equivalent rectangular tube. The stiffening effects of flanges are transformed to the restraining plate with the equivalency of buckling strength. The square tubes of single-hatted and double-hatted sections are investigated. The double-hatted section members show symmetric and antisymmetric crushing modes depending on the stiffness of flanges. The single-hatted section members show only symmetric modes. The bifurcation point of the compact crushing modes are investigated by experiments and shown almost same thickness-width ratio of the rectangular tubes. A large maximum crippling strength can be obtained by double-hatted section members with proper flange dimensions.

• Structural Engineering and Mechanics
• /
• v.3 no.6
• /
• pp.583-592
• /
• 1995

The concept of "Saturation Impulse" for rigid, perfectly plastic structures with finite-deflections subjected to dynamic loading was put forward by Zhao, Yu and Fang (1994a). This paper extends the concept of Saturation Impulse to the analysis of structures such as simply supported circular plates, simply supported and fully clamped square plates, and cylindrical shells subjected to rectangular pressure pulses in the medium load range. Both upper and lower bounds of nondimensional saturation impulses are presented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.247-249
• /
• 2009

This paper investigates active noise control(ANC) of a rectangular cavity using single channel filtered-x least mean square(FXLMS) algorithms to reduce interior noise globally. To obtain global reduction of the interior noise, multichannel active control should be incorporated in general. We, however, examined firstly the optimal location of the secondary speaker that produces a global reduction of the interior noise field. We then investigated the frequency characteristics of the reduction to yield the effective frequency band of the active control system. It follows that the secondary speaker should be located as close to the primary source as possible in order to obtain global reduction.

• Fashion & Textile Research Journal
• /
• v.7 no.2
• /
• pp.135-142
• /
• 2005

Through the formative analysis of the traditional jokakbo, we have composed surface composition that was made by a perfect square, triangle, a weather vane type, vertical type, cint$\tilde{a}$mani type, and a mixed rectangular. And we have composed that was made by vivid tone, pale tone, and so on, and finally analyzed image, preference rate of them. First, the cause of composition for the image of stimulant was composed by the cause of simplicity characteristics, interesting characteristics, rigid-flexibility characteristics, and modern characteristics. Secondly, the image of clothes was revealed as a simple image of perfect square, a feminine image of cint$\tilde{a}$mani type, a modern image of mixed rectangular in the case of large pattern. And in the case of small pattern, perfect square was revealed as a simple image, cint$\tilde{a}$mani type was revealed as a feminine image, triangle with achromatic colored weather vane type and pale tone was revealed as an interesting image, achromatic colored and pale toned a weather vane type, vivid toned vertical type was revealed as a modern image. Lastly, it revealed that the preference rate against clothes is related with the cause of simplicity characteristics, interesting characteristics, and rigid-flexibility characteristics in the case of large patterns, and especially in the case of large patterns and small patterns, the clothes of pale tone are more preferred. And achromatic colored mixed rectangular and chromatic colored cint$\tilde{a}$mani type are more preferred by the large patterns, and chromatic colored and pale toned weather vane type is more preferred by the small patterns.