• 한국재료학회지
• /
• 제7권2호
• /
• pp.102-106
• /
• 1997

박막형 접촉연소식을 포함한 마이크로 가스센서에서 membrane은 Si식각시 식각정지용으로서 또 센서 소자를 지지하는 층으로서 응력이 없어야 하며 이는 응력이 membrane파괴의 주 원인으로 작용하기 때문이다. 이에 따라 본 연구에서는 증착조건이 low pressure chemical vapor deposition(LPCVD)법과 sputtering법으로 제작된 $SiN_{x}$과 $SiN_{x}/SiO_{x}/(NON)$막의 응력고 굴절율 변화에 미치는 효과에 대한 실험을 행하였다. LPCVD의 경우 단일막인 $SiN_{x}$의 압축응력 및 굴절율을 나타내었다. Sputtering의 경우 $SiN_{x}$는 공정압력이 1mtorr에서 30torr까지 증가할수록 인가전력밀도가 $2.74W/cm^2$에서 $1.10W/cm^2$으로 감소할수록 응력값은 압축에서 인장으로 전환되었으며 본 실험에서 응력이 가장 낮게 나온 시편의경우 압축응력으로 $1.2{\times}10^{9}dyne/cm^2$가 공정압력 10mtorr, 인가전력밀도 $1.37W/cm^2$에서 얻어졌다. 굴절율은 공정압력이 1motorr에서 30motorr까지 증가할수혹 인가전력밀도가 $2.74W/cm^2$에서 $1.10W/cm^2$으로 감소할수록 감소하여 2.05에서 1.89의 변화를 보였다. LPCVD와 sputtering으로 증착된 막들은 모두 온도가 증가함에 따라 응력이 감소하였으며 온도감소시 소성적인 특성을 나타내었다.

• Current Photovoltaic Research
• /
• 제8권1호
• /
• pp.33-38
• /
• 2020

Single-phased SnS thin films have been prepared by RF magnetron sputtering at various deposition pressures. The effect of deposition pressure on the structural and optical properties of polycrystalline SnS thin films was studied using X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and ultraviolet-visible-near infrared (UV-Vis-NIR) spectrophotometer. The XRD analysis revealed the orthorhombic structure of the SnS thin films oriented along the (111) plane direction. As the deposition pressure was increased from 5 mTorr to 15 mTorr, the intensity of the peak on the (111) plane increased, and the intensity decreased under the condition of 20 mTorr. The binding energy difference at the Sn 3d_5/2 and S 2p_3/2 core levels was about 324.5 eV, indicating that the SnS thin film was prepared as a pure Sn-S phase. The optical properties of the SnS thin films indicate the presence of direct allowed transitions with corresponding energy band gap in the rang 1.47-1.57 eV.

• 한국진공학회지
• /
• 제21권1호
• /
• pp.17-21
• /
• 2012

투명전도산화막인 Ga-도핑된 ZnO (GZO) 박막을 RF 마그네트론 스퍼터링 증착법을 이용하여 증착하고 전기적, 광학적 특성을 연구하였다. 증착변수로 공정압력에 변수를 주었으며 공정 압력 변화에 따라 전기적 특성과 광학적 특성이 달라짐을 확인할 수 있었다. 모든 박막은 공정압력에 상관없이 c-축(002) 방향성을 나타냈다. 증착된 GZO 박막의 전기저항성은 $8.68{\times}10^{-3}{\Omega}{\cdot}cm\sim2.18{\times}10^{-3}{\Omega}{\cdot}cm$이었고, 모든 가시광 영역에서 90% 이상의 평균 투과율을 보였다. 공정압력에 따라 상온에서 증착된 GZO 박막은 우수한 낮은 저항성과 높은 투과율을 나타내었고, 평판디스플레이와 태양전지의 투명전극으로 응용되기에 적합한 특성을 지닌 것을 확인 할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.815-819
• /
• 2014

Aluminum nitride (AlN) thin film and TiN film as a buffer layer were deposited on INCONEL 600 substrate by reactive RF magnetron sputtering at room temperature(R.T.) under 25~75% $N_2/Ar$ atmosphere. The as-deposited AlN films at 25~50% $N_2/Ar$ showed a polycrystalline phase of hexagonal AlN, and an amorphous phase. The peak of AlN (002) plane, which was determinant on a performance of piezoelectric transducer, became strong with increasing the $N_2/Ar$ ratio. Any change in the preferential orientation of the as-deposited AlN films was not observed within our $N_2$ concentration range. The piezoelectric sensing properties of AlN module were performed using pressure-voltage measurement system. The output signal voltage of AlN module showed a linear behavior between 20~80 mV in 1~10 MPa range, and the pressure-sensing sensitivity was calculated as 3.6 mV/MPa.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.435-438
• /
• 2001

Thin films of vanadium oxide(VO$\sub$x/) have been deposited by r.f. magnetron sputtering from V$_2$O$\sub$5/ target in gas mixture of argon and oxygen. The oxygen/(oxygen+argon) partial pressure ratio is changed from 0% to 8%. Crystal structure, chemical composition and bonding properties of films sputter-deposited under different oxygen gas pressures are characterized through XRO, XPS, RBS and FTIR measurements. All the films prepared below 8% O$_2$ are amorphous, and those prepared without oxygen are gray indicating the presence of V$_2$O$\sub$$_4$/ phase in the films. V$_2$O$\sub$5/ and lower oxides co-exist in sputter-deposited films and as the oxygen partial pressure is increased the films become more stoichiometric V$_2$O$\sub$5/. The increase of O/V ratio with increasing oxygen gas pressure is attributed to the partial filling of oxygen vacancies through diffusion. It is observed that the oxygen atoms. located on the V-O plane of V$_2$O$\sub$5/ layer participate more readily in the oxidation process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.737-740
• /
• 2001

This paper describes the fabrication and characteristics of CrN thin-film type pessure sensors, which the sensing elements were deposited on SUS. 630 diaphragm by DC reactive magnetron sputtering in an argon-nitride atmosphere(Ar-(10%)N$_2$). The optimized condition of CrN thin-film sensing elements was thickness range of 3500${\AA}$ and annealing condition(300$^{\circ}C$, 3 hr) in Ar-10 %N$_2$deposition atmosphere. Under optimum conditions, the CrN thin-films for strain gauges is obtained a high resistivity, $\rho$=1147.65 ${\mu}$$\Omega$cm, a low temperature coefficient of resistance, TCR=-186 ppm/$^{\circ}C$ and a high temporal stability with a good longitudinal, 11.17. The output sensitivity of fabricated CrN thin-film type pressure sensors is 2.36 mV/V, 4∼20 mA and the maximum non-linearity is 0.4 %FS and hysteresis is less than 0.2 %FS.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.169-169
• /
• 2016

In this paper, we report electrical, optical and structural properties of Al-doped zinc oxide (AZO) thin films deposited at different substrate temperatures and pressures. The films were prepared by radio frequency (RF) magnetron sputtering on glass substrates in argon (Ar) ambient. The X-ray diffraction analysis showed that the AZO films deposited at room temperature (RT) and 20 Pa were mostly oriented along a-axis with preferred orientation along (100) direction. There was an improvement in resistivity ($3.7{\times}10^{-3}{\Omega}-cm$) transmittance (95%) at constant substrate temperature (RT) and working pressure (20 Pa) using the Hall-effect measurement system and UV-vis spectroscopy, respectively. Our results have promising applications in low-cost transparent electronics, such as the thin-film solar cells and thin-film transistors due to favourable deposition conditions. Furthermore our film deposition method offers a procedure for preparing highly oriented (100) AZO films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.58-61
• /
• 2008

$TiO_2$ is a wide band-gap semiconductor (3.4 eV) and can only absorb about 5% of sun light in the ultraviolet light region, which largely limits its practical applications because of the lower utility of sun light and quantum yield. In order to move the absorption edge of $TiO_2$ fims to visible spectrum range, we have made the impurity level within a band-gap of $TiO_2$ thin film by introduction of oxygen vacancy. Oxygen-defected $TiO_2$ thin film have prepared by reactive sputtering with the partial pressure of $Ar:O_2=10:90{\sim}99.33:0.66$ ratio. As a result, we could have the impurity level of about 2.75 eV on condition that oxygen partial pressure is below 7%.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.253-253
• /
• 2011

ZnTe semiconductor is very attractive a material for optoelectronic devices in the visible green spectral region because of it has direct bandgap of 2.26 eV. The prototypes of ZnTe light emitting diodes (LEDs) have been reported [1], showing that their green emission peak closely matches the most sensitive region of the human eye. The optoelectronic properties of ZnTe:O film allow to expect a large optical gain in the intermediate emission band, which emission band lies about 0.4-0.6 eV below the conduction band of ZnTe [2]. So, the ZnTe system is useful for the production of high-efficiency multi-junction solar cells [2,3]. In this work, the ZnTe:O thin films were deposited on Al2O3 substrates by using the radio frequency magnetron sputtering system. Three sets of samples were prepared using argon and oxygen as the sputtering gas. The deposition chamber was pre-pumped down to a base pressure of 10-7 Torr before introducing gas. The deposition pressure was fixed at 10-3 Torr throughout this work. During the ZnTe deposition, the substrate temperature was 300 oC. The optical properties were also investigated by using the ultraviolte-visible (UV-Vis) spectrophotometer.

• 한국재료학회지
• /
• 제12권4호
• /
• pp.290-295
• /
• 2002

Microstructure and electrical properties of $In_2O_3$ transparent thin films are analyzed on the basis of Structure Zone Model (SZM) proposed by Thornton. Thin films are deposited on glass substrate by RF magnetron sputtering with variation of substrate temperature $(T_s)$ and argon gas pressure $(P_{Ar})$. Microstructure of Zone I of SZM is observed with lowering of substrate temperature or increasing of argon pressure. The higher electrical resistivity of those specimens is due to micro-pores or voids between columnar grains. At the conditions of $T_s=450^{\circ}C$ and $P_{Ar}$=4.2mTorr, the Zone II structure of SZM and the lowest electrical resistivity $(2.1{\times}10^{-2}{\Omega}cm)$ are observed. The dense structure of columnar grains with faceting on growing surface and preferred orientation of (100) plane are observed in those specimens.