• Structural Engineering and Mechanics
• /
• v.57 no.3
• /
• pp.425-439
• /
• 2016

This paper deals with the behavior of fresh concrete that is under vibration using mass-spring model (MSM). To this end, behaviors of two different full scale precast concrete molds were investigated experimentally and theoretically. Experiments were performed under vibration with the use of a computer-based data acquisition system. Transducers were used to measure time-dependent lateral displacements at some points on mold while mold is empty and full of fresh concrete. Analytical modeling of molds used in experiments were prepared by three dimensional finite element method (3D FEM) using software. Modeling of full mold, using MSM, was made to solve the problem of dynamic interaction between fresh concrete and mold. Numerical displacement histories obtained from time history analysis were compared with experimental results. The comparisons show that the measured and computed results are compatible.

• Journal of KSNVE
• /
• v.8 no.3
• /
• pp.399-407
• /
• 1998

An investigation into the modal interaction of an autoparameteric systemunder broad-band random excitation is made. The specific system examined is a spring-pendulum system with internal resonance, which is known to be a good model for a variety of engineering systems, including ship motions with nonlinear coupling between pitching and rolling motions. By means of the Gaussian closure method the dynamic moment equations explaining the random responses of the system are reduced to a system of autonomous ordinanary differential equations of the first and second moments. In view of equilibrium solutions of this system and their stability we examine the system responses. The stabilizing effect of system damping is also examined.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.237-240
• /
• 1999

The elastic stress analysis of the die for helical gear forging has been calculated by using the nodal force at the final stage obtained from the rigid-plastic finite element analysis. In order to obtain more precise gear products. the elastic analysis of the die after release of punch and the elastic spring-back analysis of product after ejection have been performed and the final dimension of the computational product has been in good agreement with that of the experimental product.

• Journal of computational fluids engineering
• /
• v.14 no.3
• /
• pp.33-48
• /
• 2009

In the present study, a fast grid deformation technique has been incorporated into the unsteady compressible and incompressible viscous flow solvers on unstructured hybrid meshes. An algebraic method based on the basis decomposition of normal edge vector was used for the deformation of viscous elements, and a ball-vertex spring analogy was adopted for inviscid elements among several spring analogy methods due to its robustness. The present method was validated by comparing the results obtained from the grid deformation and the rigid motion of entire grids. Fish swimming motion of an NACA0012 airfoil and flapping wing motion of a generic fighter were also simulated to demonstrate the robustness of the present grid deformation technique.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.871-876
• /
• 2001

One-touch fittings are important components that can make a quick and tight connection between pneumatic pipe systems. In this study, the stress analyses with various working pressures on these one-touch fittings are carried out using finite element method. Material properties, to use the stress analyses, are measured by the universal tester and digital Vickers hardness tester. The stress analyses on the circular shell spring forced by various pressures(100, 150, 200, 250kpa) and on the main body due to the fluid-structural interaction are investigated. Results show that the stresses of one-touch fitting are concentrated to supported part of main body and the soundness of a circular shell spring with maximum pressure 250kpa was confirmed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.79-83
• /
• 2010

Recently, the flat wiper which is one piece wiper and subjected to a pressing force at a single center point is gaining wide applications on automotive windshields. However, nonuniform reactive pressure distributions takes place, so that wiping is not completed at such locations. The wiping performance of the flat wiper is best when a wiper and a curved windshield have perfect contact without gaps under the specified pressing force of 13 ~ 15 gf/cm. Therefore, it is necessary that the realistic curvature equation of a wiper spring-rail should be obtained. Finite element analysis, CATIA script-macro function, and the least square method were utilized to find out the curvature of a spring-rail for a perfect contact with a windshield under a specified concentrated load. The curvature equation became the third order polynomial.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.11
• /
• pp.890-896
• /
• 2002

This paper deals with the dynamic stability of a brake shoe under pulsating frictional forces. A lining part of brake systems is assumed as a distributed spring, and the supported elements of a shoe are assumed as translational springs for a constant distributed frictional force and a pulsating frictional force. Governing equations are derived by the use of the extended Hamilton's principle, and numerical results are calculated by finite element method. The critical distributed frictional force and instability regions were investigated for the change of distributed spring constants and translational spring constants.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.3
• /
• pp.219-227
• /
• 2017

In pelagic longline, deploying the gear such that the depth of the hook is the same as that of the target fish is important to improve the fishing performance and selectivity. In this study, the depth of the tuna longline hook was estimated using the mass-spring model, catenary curve method, and secretariat of the pacific commission Pythagorean method in order to improve the performance of the longline gear in Fiji. The former two methods were estimated to be relatively accurate, and the latter showed a large error. Further, the mass-spring model accounted for the influence of tidal current in the ocean, which was found to be appropriate for use in field trials.

• Journal of Korea Multimedia Society
• /
• v.14 no.5
• /
• pp.642-649
• /
• 2011

Among the various aspects of offline handwritten character patterns, it is the great variety of writing styles and variations that renders the task of computer recognition very hard. The immense variety of character shape has been recognized but rarely studied during the past decades of numerous research efforts. This paper tries to address the problem of measuring image distortions and handwritten character patterns with respect to reference patterns. This work is based on mass-spring mesh model with the introduction of simulated electric charge as a source of the external force that can aid decoding the shape distortion. Given an input image and a reference image, the charge is defined, and then the relaxation procedure goes to find the optimum configuration of shape or patterns of least potential. The relaxation process is based on the fourth order Runge-Kutta algorithm, well-known for numerical integration. The proposed method of modeling is rigorous mathematically and leads to interesting results. Additional feature of the method is the global affine transformation that helps analyzing distortion and finding a good match by removing a large scale linear disparity between two images.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.913-916
• /
• 2006

Spatial distribution, seasonal and interannual variability of chlorophyll a concentration in Okhotsk Sea from SeaWiFS data between 2001 and 2004 were describe. An Empirical Orthogonal Function method was applied for analysis data. The ten modes described about 85% of total variance. Two maxima were defined - more intensive in spring and weaker in autumn. The first mode showed zones with chlorophyll a concentration during maximum bloom. The second mode specified timing of spring bloom in various regions in Okhotsk Sea. Analysis of SeaWiFS data indicated connection between highest chlorophyll a concentration and sea surface temperature limits during spring bloom. Similar relation was not found during fall bloom.