• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.10-17
• /
• 2000

In this paper, we evaluate the correlation properties and the optimization of PN sequence phase for multi-media DS/CDMA system with variable spreading gain (VSG) scheme. In multi-media multi-rate DS/CDMA systems, the optimization of PN sequence phase is not a tractable problem, since the sequences should be optimized against both sequences of the same length and other sequences with different length. Hence, we verify the correlation properties of PN sequence phase in multi-rate system environment and furthermore, we propose the new phase criterion, MIN-AIP (minimum-average interference parameter), to minimize the bit error rate (BER). As the results of performance evaluations, it is shown that the performance of MIN-AIP criteria gives the best results.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.64-68
• /
• 2010

In this paper, we studied the novel synchronization algorithm for cooperative communication system over fading. We research mainly on the decode-and-forward scheme. Also, we inserted spreading sequence in origin data frame to control efficiently data synchronization. In mobile station, inserted spreading sequence in data frame passed through the corelation process. We had decide the delay value of received data through result of correlation process. In simulation, We applied that channel gain of three node had different value in various fading environment. Finally we will be possible to control the received data synchronization using result of corelation value in each node between relay to mobile station and base station to mobile station. The results of this paper can be applicable to the cooperative systems.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.9
• /
• pp.27-35
• /
• 1999

In this paper, we propose an error detection scheme of phase offsets for binary sequences including PN (Pseudo Noise) sequences based on the number theoretical approach. It is important to know phase offsets of spreading sequences in the CDMA (Code Division Multiple Access) mobile communication systems because phase offsets of the same spreading sequence are used to achieve the acquisition and are used to distinguish each base station. When the period of the sequence is not very long, the relative phase offset between the sequence and its shifted replica can be found by comparing them, but as the period of the sequence increases it becomes difficult to find the phase offset. The error detection failure probability of the proposed method is derived, and it is confirmed by the simulation results. We also discuss the circuit realization of the proposed method and show it can be easily implemented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.952-958
• /
• 1994

In this paper a method calculates the time offset between a binary sequence and its shifted sequence based on the number theoretic approach is presented. Using this method the time offset between a binary sequence and its shifted sequence can be calculated. It has been recongnized that the defining the reference (zero-offset) sequence is important in synchronous code division multiple access(CDMA) system since the same spreading sequence are used by the all base station. The time offset of the sequence with respect to the zero offset sequence are used to distinguish signal received at a mobile station from different base stations. This paper also discusses a method that defines the reference sequence.

• Journal of electromagnetic engineering and science
• /
• v.4 no.4
• /
• pp.183-189
• /
• 2004

In this paper, the Eigen-RAKE receiver in wideband direct sequence code-division multiple access(DS-CDMA) systems with downlink smart antenna is analyzed for different spreading bandwidths(1.25 MHz, 5 MHz, 10 MHz) and different channel environments(macro, micro). The realistic spatio-temporal wideband multipath channel is assumed, one of which is standardized multiple-input single-output(MISO) radio channel model for WCDMA link-level simulations proposed by $3^{rd}$ generation partnership project(3GPP) contributions. We assumed spatial scattering phenomenon in which many unresolvable path signals within a limited range of spatial angle simultaneously contribute to the signals received at the receiver. Several multipaths within one chip are distinguished into each one and the first multipath components are selected as the desired signal and the others are considered self-interference. Downlink DS-CDMA system with eigenbeamformer using wider bandwidth present better performance than that using narrow bandwidth system by employing Eigen-RAKE receiver of many number of branches. It is shown that the downlink eigenbeamformer is more effective in typical urban macro cellular environments when using Eigen-RAKE receiver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1700-1706
• /
• 2016

To improve the number of simultaneous transmissions of machine-to-machine traffic in a spread spectrum ALOHA channel, we propose a new spreading technique called doubly truncated cyclic code shift keying (DTCCSK). By truncating the codeset of cyclic code shift keying, DTCCSK freely adjusts the spreading factor and the symbol length. As a result, DTCCSK exhibits both a high spectral efficiency of M-ary signaling and low implementation complexity of a direct sequence.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.11
• /
• pp.637-644
• /
• 2014

This paper investigates the detection performance of fault location using STDR(sequence time domain reflectometry) and SSTDR(spread spectrum time domain reflectometry) with various length and types of sequences, and then, proposes an improved detection technique by eliminating the injected signal in SSTDR. The detection error rates are compared and analyzed in power line channel model with various fault locations, fault types, and spreading sequences such as m-sequence, binary Barker sequence, and 4-phase Frank sequence. It is shown that the proposed technique is able to improve the detection performance obviously when the reflected signal is weak or the fault location is extremely close.

• Journal of Broadcast Engineering
• /
• v.24 no.7
• /
• pp.1221-1227
• /
• 2019

This paper describes a low-density parity-check (LDPC) coded index modulated orthogonal frequency division multiplexing with quasi-orthogonal sequence (IM-OFDM-QOS) and provides performance evaluations of the proposed system. By using QOS as the spreading code, IM-OFDM-QOS scheme can improve the reception performance than IM-OFDM-SS scheme for a given data rate. On the other hand, LDPC code is widely used to the latest wireless communication systems as forward error correction (FEC) scheme and has Shannon-limit approaching performance. Therefore, by applying LDPC code to IM-OFDM-QOS system as FEC scheme, the reception performance can be further improved. Simulation results show that significant signal-to-noise ratio (SNR) gains can be obtained for LDPC coded IM-OFDM-QOS system compared to the LDPC coded IM-OFDM-SS system and the SNR gain increases with the higher code rate.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.1
• /
• pp.13-18
• /
• 2019

This paper analyzes the signal acquisition performance of the legacy GNSS spreading codes and a polyphase code. The code length and chip rate of a polyphase code are assumed to be same as those of the GPS L1 C/A and Galileo E1C codes. The autocorrelation and cross correlation characteristics are analyzed. In addition, a way to calculate a more accurate probability of false alarm for a code with sidelobe non-zero auto-correlation function is proposed. Finally, we estimate the probability of detection and the mean acquisition time for a given signal strength and the probability of false alarm.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4551-4559
• /
• 2022

The aim of this research is to analyze the characteristics of a core melt discharged from the reactor vessel and the spreading behavior the core melt in the reactor cavity of the SMART. First, a severe accident sequence under conservative conditions is simulated by the MELCOR code to obtain the conditions for an analysis of the spreading behavior and coolability of the ex-vessel melt. Second, the spreading behavior and coolability of the ex-vessel melt are analyzed by the MELTSPREAD code. The level, temperature, and pressure of the water in the cavity as well as the temperature, mass, composition, and discharge velocity of the melt were utilized to construct the ex-vessel analysis. The melt spread only to part of the cavity, and that the height of the corium in a static state was less than 25 cm. The characteristics of a small modular reactor on the spreading behavior and coolability of melt were analyzed. In the SMART, the amount of melt discharged into the cavity is relatively small and the area of the cavity is sufficiently large when compared to a high-power pressurized water reactor. It was found that the coolability of an ex-vessel core melt can be sufficiently secured.