• Korean Journal of Ichthyology
• /
• v.20 no.4
• /
• pp.285-290
• /
• 2008

Morphological characteristics of the cross-bred $F_1$ hybrid between female Paralichthys olivaceus and male Platichthys stellatus were studied. The hybrids showed common biological characteristics of both parents, but showed more morphological similarity to P. stellatus than P. olivaceusin the following biometries: higher ratios of body length to body height (56.3%), head length to snout length (20.6%), and head length to upper jaw length (34.2%). They also showed some significant biometric characteristics similar to P. stellatus, such as ratios of predorsal length (10.5%), prepectoral length (32.2%), preventral length (29.8%), and preanal length (28.0%) to body length. The hybrids had black spots on the dark brownish-green area near the eyes, and they lacked the small bony tubercles that area characteristic of Platichthys stellatus. The hybrids had unique bands: 6~20 bands on the dorsal fin and 5~10 bands on the anal fin that gradually lost their coloration towards the fin margins. The number of fin rays were 60~66 for dorsal fin, 40~51 for anal fin, 18~21 for caudal fin, and 11~12 for pectoral fin. The gills of the hybrids contained 13~18 gill rakers and 73~98 gill filaments. The vertebrae of the hybrids numbered 34~37, with 2~3 vertebrae fused from the start of the caudal vertebrae.

• Journal of Acupuncture Research
• /
• v.32 no.2
• /
• pp.1-9
• /
• 2015

Objectives : The present study was an evaluation and standardization of herbal components in order to establish the efficacy and safety of Shinbaro pharmacopuncture. Methods : Among the raw materials of Shinbaro pharmacopuncture, the components Cibotii Rhizoma, Eucommiae Cortex, and Ledebouriellae Radix were assessed through ingredient verification experiments using thin-layer chromatography(TLC) and ultraviolet rays(UV) lamps. In addition, we standardized Acanthopanacis Cortex and Achyranthis Radix through validation using high performance liquid chromatograph-diode array detector(HPLC-DAD). Results : As result appeared a blue-white fluorescence under ultraviolet rays; changed to dark green after adding 1 % ferric chloride solution(due to Cibotii Rhizoma), and presented a yellow-green fluorescence when mixed with an ethyl ether under UV lamps by way of the ethyl ether layer, confirming Eucommiae Cortex. Ledebouriellae Radix was confirmed as dark brown spots at Rf values of 0.56 and 0.71 using TLC. Additionally, Acanthopanacis Cortex and Achyranthis Radix HPLC test results showed that linearity was $R^2{\geq}0.99$, and detection limit and quantitation limit were 0.23 to $1.29{\mu}g/mL$, and 0.71 to $3.90{\mu}g/mL$, respectively. Furthermore, precision and accuracy were confirmed to have relative standard deviation(RSD) values of 0.10 to 1.89 % and 96.19 to 103.72 %, respectively. Shinbaro pharmacopuncture did not have any overlapping or interference from other peaks in detection under the abovementioned analysis conditions. Conclusions : In conclusion, we confirmed that maintenance of Shinbaro pharmacopuncture validity was possible by means of quality control of Cibotii Rhizoma, Eucommiae Cortex, and Ledebouriellae Radix through ingredient identification and Acanthopanacis Cortex and Achyranthis Radix through high performance liquid chromatograph(HPLC) analysis. Further, we hope to contribute to the development strategy of herbal industry acupuncture.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.6
• /
• pp.17-29
• /
• 2014

A remedial investigation was conducted at five military training ranges in northern Gyeonggi province to collect information necessary for the design of on-site treatment facilities for the abatement of explosive compounds release to the environment. These information includes (i) identification of dominant explosive compounds in each range, (ii) discharge/migration routes, and (iii) contaminant distribution in particle size fraction and settling velocity of the soils. The results of investigation showed that TNT and RDX are the major contaminants but the extent of contamination varied depending on the types of military training practices and topography of the site. RDX was also detected in the subsurface soil and in the nearby stream within the training ranges, suggesting release of contaminants to streams. The median concentrations of explosives in the surface soil were less than 20 mg/kg despite several 'hot spots' in which explosives concentrations often exceeds several hundred mg/kg. The average clay contents in the soil of target area was less than 5 % compared to 12 % in the control, indicating loss of smaller particles by surface runoff during rainfall due to lack of vegetative land cover. Analysis of explosive compounds and particle size distribution showed that the amount of explosive compounds in soil particles smaller than 0.075 mm was less than 10 % of the total. Settling column tests also revealed that the quantity of explosive compounds in the liquid phase of the effluent was greater than that in the solid phase. Therefore, pre-treatment of particulate matter in surface runoff of shooting range with a simple settling basin and subsequent effluent treatment with planted constructed wetlands as polishing stage for explosives in the aqueous phase would provide the shooting ranges with a self-standing, sustainable, green solution.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.1_2
• /
• pp.146-153
• /
• 1992

In the outpatient clinic, we have many patients who suffer from temporomandibular joint disorders. These vary from MPD syndrome to osteoarthrosis, and many cases have tender spots or areas on the temporomandibular joint region and/or masticatory muscles. Further, they frequently have masticatory muscle pain when opening the jaw. This paper presents the results of our research on the differential diagnosis for tendernesses and pain on opening the jaw in the temporomandibular joint region and the masticatory muscles by joint cavity pumping with local anesthestic. The areas of tenderness and jae-opening paw in 65 patient suffering from temporomandibular joint disorder were examined and recorded before and after anesthetizing the upper joint cavity with 2% lidocaine. Maximum interincisal distance was similarly recorded. The results were as follows : In the area surrounding the upper joint cavity including the lateral pterygoid muscle, the tenderness and jaw-opening pain vanished almost entirely after anesthesia. This was considered a direct infiltrative effect of the local anesthesia. After the anesthesia, 86% of the tendernesses on the sternocleidomastoid muscles, and 66% of those on the posterior belly of the diagstric muscles vanished, while the disappearance rates on the masseter, temporal, and medial pterygoid muscles were 50~60%. Apart from the temporomandibular region, pain on opening the jaw was found on the masseter, temporal, posterior belly of the digastric muscles, and medial pterygoid muscles before anesthesia. The disappearance rates after anesthesia were 90~100% except for the pain of the posterior belly of the digastric muscles, for which the rate was 66%. These results suggest that more than 88% of the tendernesses on the sternocleidomastoid muscle, more than 60% of the tendernesses and jaw-opening pains on the digastric muscle, and more than half of the tendernesses and almost all of the jaw-opening pains in the jaw-closing muscles are referred pains from the temporomandibular joint. The tendernesses that had no change after anesthesia were considered to be derived from spasms of the muscles proper. Generally, maximum interincisal distance increased after anesthesia. The average distance was 34mm before anesthesia, but increased to 41mm after anesthesia. In a few cases, however little or no change was found in those distances. In these cases, pathological changes were found in the joint cavities arthrographically or arthroscopically.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.480-480
• /
• 2008

Vacuum circuit breaker(VCB) is now emerging as an alternative of gas circuit breaker(GCB) which uses SF6 gas as insulating material whose dielectric strength is outstanding. But we have to reduce SF6 gas because SF6 gas is one of greenhouse gas and efforts to reduce greenhouse gas are now trend of the world. Therefore, we can say VCB is the optimal alternative of GCB because vacuum is environmentally friendly. The vacuum interrupter is the core part of VCB to interrupt arcing current. There are mainly two methods to extinguish arc. One is radial magnetic field (RMF) method and the other is axial magnetic field (AMF) method. We deals with RMF method in this paper. Compared with AMP, RMF arc quenching method has different principle to extinguish arc. In case of RMF method, pinch effect is much larger than AMF method. Because of pinch effect RMF type contact electrodes have the single large spot which is severly damaged and melted while AMF type contact electrodes have small and multiple spots which are slightly damaged and melted. To prevent contact electrode being damaged and melted from high temperature-arc, RMF method uses Lorentz force to move arc. In this paper we calculated and compared the arc driving force of two cases and we analyzed the force acting on each part of arc by means of commercial finite element method software Maxwell 3D. They have 3petals and we considered two cases. One is the case when fixed(upper) and movable(lower) contacts are in mirror arrangement (Case 1). The other is the case when one of two contacts (movable contact) is revolved at maximum angle as possible as it can be (Case 2). And at each case above, we analyzed arc driving force at two positions, position 1 is the closest to the center of contact and position 2 is near the edge of petal on fixed contact. As a result we could find that Case 2 generated stronger arc driving force than Case 1 at position 1. But at position 2 Case 1 generated stronger arc driving force than Case 2. This simulation method can contribute to optimizing spiral-type electrode designs in a view of arc driving force.

• Journal of the Korean Institute of Gas
• /
• v.21 no.6
• /
• pp.88-95
• /
• 2017

The usage of toxic gas in Korea is increasing in the development of high-tech industries such as semiconductors, displays and solar panels. The recent survey of domestic toxic gas consumption indicates an increase in annual average of 12.4 percent, but it is still focused on usage, and it is negligent in safety and treating the post. In September 2012, an accident occurred in Gu-mi involving hydrofluoric acid leak demonstrates the absence of safety management. Due to the incident, the government, industry and academia have been interested in chemical substances(toxic gas), and the government-led safety management has been established and implemented, but there are still a lot of safety blind spots. The purpose of this study is to develop effective measurement methods for the destruction or removal efficiency of gaseous materials emitted from the Scrubber used in the semiconductor and display industries. Also, this study demonstrated how toxic gas facilities can be applied without error by verification test for the measurement method guideline of the destruction or removal efficiency of the green-house gas reduction facility in the semiconductor and display industries used by the National Institute of Environmental Research and the UNFCCC, and suggested the differentiated measurement methods for toxic gas reduction facilities, and the third party certification for safety facilities is needed to prevent toxic gas accidents.

• Korean journal of applied entomology
• /
• v.46 no.2
• /
• pp.229-234
• /
• 2007

Pure Bombus ignitus venom samples were submitted to two-dimensional gel electrophoresis. A total of 64 excised spots were analyzed by mass spectrometry. Three main proteins resulted in the identification have not been described in other bee venoms before. Dose-dependence against human carcinoma (Hep3B, BT-20, A549 and AGS) were observed from 1ng/ml to 100ng/ml. Expecially, the treatment of 100ng/ml B. ignitus venoms showed the highest cytotoxicity with 55% against hepatocellular carcinoma (Hep3B). The B. ignitus venoms showed strong antimicrobial activities against Enterococcus faecium and Shigella sonnei, and practically antimicrobial activity against the other microorganisms tested. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of E. faecium and S. sonnei, were 0.256ug/ml, respectively.

• The Korean Journal of Malacology
• /
• v.17 no.2
• /
• pp.79-84
• /
• 2001

In order to obtain the basic information for seedling production of the scallop, Patinopecten yessoensis, the egg development and larva growth were investigated at different conditions such as water temperature, salinity and phytoplankton. Eggs were demersal isolated eggs, which averaged 77.3${\pm}$2.7$\mu\textrm{m}$ in diameter after spawning. The fertilized eggs developed to D-shaped larva of shell length 117.5${\pm}$3.8$\mu\textrm{m}$ after 60 hours at 15$^{\circ}C$. The range of water temperature and salinity during egg development were 10-20$^{\circ}C$ and 28-34 ppt, respectively. The time of egg development was shorter with higher water temperature. After 10 days of spawning, D-shaped larva reached 160 $\mu\textrm{m}$ in shell length, and after 25 days became full-grown larva 250 $\mu\textrm{m}$ in shell length, in which could be observed eye spots. The relative growth formula between shell length (SL) and shell height (SH) was SH = 1.0425SL-27.731 (r$^2$= 0.9749) during the entire larva period. In regard to water temperature, growth and survival rates of larvae were good at 16$^{\circ}C$. Lower growth and survival rates were observed at 12$^{\circ}C$ and 20$^{\circ}C$ than that at 16$^{\circ}C$. When larvae were fed mixed phytoplankters, such as isochrysis galbana, Pavlova lutheri and Chaetoceros calcitrans, their growth and survival rates were the highest among groups.

• Asian Journal of Turfgrass Science
• /
• v.24 no.1
• /
• pp.9-15
• /
• 2010

During 2008~2009 winter season, yellow patch and gray snow mold occurred on turfgrass plants in golf courses in Kangwon and Jeonbuk provinces, respectively. The fungi associated with the diseases were identified as Rhizoctonia cerealis Van der Hoeven and Typhlua incarnata Lasch ex Fr., based on the morphological characteristics of hyphae and sclerotia. R. cerealis and T. incarnata were pathogenic to most turfgrass and crop species tested. R. cerealis infected crown, stem and leaf tissue of the host plants, and the symptom was light yellow circular patch. Individual infected leaf near the margin of patch developed red color first and finally turn brown. The symptoms caused by gray snow mold pathogen are water-soaked spots, and became a watery soft rot. Infection parts became yellow and then turned brown followed by death of the whole plant. White mycelia were developed on higher petioles, leaves, and on soil where these plant parts lay, and black sclerotia of variable size and shape formed in the mycelial mass. All isolates tested were pathogenic on most turfgrass and crop plants, and significantly different in aggressiveness. Disease severity increased with longer snow cover days on target plants, suggesting that disease severity was expressed over snow cover days. There were significant differences in disease severity among the graminious species, and among cultivars within each species, indicating varying levels of susceptibility to R. cerealis and T. incarnata.

• Journal of Ginseng Research
• /
• v.32 no.2
• /
• pp.120-126
• /
• 2008

This study was carried out to investigate the some physicochemical properties of Korean red ginseng (Panax ginseng C.A. Meyer) water extract (RGWE) after heated with high temperatures above $100^{\circ}C$ for 2 hours. RGWEs were heated at 100, 110 and $120^{\circ}C$ for 2 hours by using autoclave. After RGWEs were heated at high temperature for 2 hours without not adjustment of pH, the changes of saponin, free sugars, mineral and color in the RGWEs were investigated. Total ginsenoside content in control was 1.99%, while those of RGWE were 1.65, 1.49 and 1.29% when treated at 100, 110 and $120^{\circ}C$, respectively. The contents of total ginsenoside showed decreased tendency as heating temperatures were increased. The ginsenoside-$Rh_{2}$ and $-Rg_{3}$, which have been reported as very stable red ginseng ginsenosides, showed relatively strong spots on TLC when RGWEs were heated at 110 and $120^{\circ}C$. In case of free sugars in RGWEs, fructose, glucose and maltose showed high contents when compared with control, while Fe, Ca and Mg ions showed very low contents. Value of L in RGWE treated with high temperature was almost the same with control, while values of a and b were increased. Values of a were increased from -0.86 of control to +0.04, +0.05 and +1.14 when treated with 100, 110 and $120^{\circ}C$, respectively. Values of b also were increased from 27.68 of control to 33.61, 33.61 and 37.42 when treated with 100, 110 and $120^{\circ}C$, respectively. Values of total color in RGWEs treated with high temperatures, E, were finally increased by values of a and b.