• Journal of Information Technology Applications and Management
• /
• v.27 no.1
• /
• pp.125-145
• /
• 2020

We explore technology ecosystem of smart surgical medical system by analyzing patent data applied for in Korea and Japan. First, a review of trends of patent application by country/technological domain show that there exist a minority of technology domains focused on R&D, which represent their trends have been increasingly active. Also, while a number of Japanese firms mainly consist of the patent market of Japan, in case of the Korean market, a few universities, SMEs, and foreign firms are found to be the main applicants. As a result of the network analysis with the links as the relations of co-patenting, the relationships, which are active of convergence and knowledge spillover among the heterogeneous technology domains within each market, as well as the technology domains, which are the most active in international cooperation among each homogeneous domain, could get derived and visualized in the ecosystem. In addition, the technology domains in each patent market with leading locations, roles, and influence in the network can also be identified through the centrality analysis. In this study, the analysis for technology competitiveness are carried out focusing on patent activity and patent impact. The results denote that across all domains, the Japanese market may possess higher patent activity and patent impact compared to the Korean market. In consequence, we derive the position map for comparison by country and technology domain from a perspective considering comprehensively the multi-dimensional attributes based on the results of both network analysis and technology competitiveness.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.41-47
• /
• 1999

In this paper, we report 3D-simulations of a plasma etching process by employing cell-removal algorithm takes into account the mask shadow effect os well as spillover errors. The developed simulator haas an input interface to take not only an analytic form but a Monte Carlo distribution of the ions. The graphic user interface(GUI) was also built into the simulator for UNIX environment. To demonstrate the capability of 3D-SURFILER(SURface proFILER), we have simulated for a typical contact hole structure with 36,000($30{\times}40{\times}30$) cells, which takes about 20 minutes with 10 Mbytes memory on sun ultra sparc 1. as an exemplary case, we calculated the etch profile during the reactive ion etching(RIE) of a contact hole wherein the aspect ratio is 1.57. Furthermore, we also simulated the dependence of a damage parameter and the evolution of topography as a function of the chamber pressure and the incident ion flux.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.141-145
• /
• 2007

Due to their excellent catalytic activity with respect to methanol oxidation on platinum at low temperature, platinum nanosized catalysts have been a topic of great interest for use in direct methanol fuel cells (DMFCs). Since pure platinum is readily poisoned by CO, a by-product of methanol electrooxidation, and is extremely expensive, a number of efforts to design and characterize Pt-based alloy nanosized catalysts or Pt nanophase-support composites have been attempted in order to reduce or relieve the CO poisoning effect. In this review paper, we summarize these efforts based upon our recent research results. The Pt-based nanocatalysts were designed by chemical synthesis and thin-film technology, and were characterized by a variety of analyses. According to bifunctional mechanism, it was concluded that good alloy formation with $2^{nd}$ metal (e.g., Ru) as well as the metallic state and optimum portion of Ru element in the anode catalyst contribute to an enhanced catalytic activity for methanol electrooxidation. In addition, we found that the modified electronic properties of platinum in Pt alloy electrodes as well as the surface and bulk structure of Pt alloys with a proper composition could be attributed to a higher catalytic activity for methanol electooxdation. Proton conducting contribution of nanosized electrocatalysts should also be considered to be excellent in methanol electrooxidation (Spillover effect). Finally, we confirmed the ensemble effect, which combined all above effects, in Pt-based nanocatalsyts especially, such as PtRuRhNi and $PtRuWO_{3}$, contribute to an enhanced catalytic activity.

• Environmental and Resource Economics Review
• /
• v.22 no.2
• /
• pp.309-328
• /
• 2013

In this research, we try to find the conditions under which profit maximizing labor demand increases with pollution abatement activities under the environmental protection policy. Especially, we focus only on the technological advances in traditional production process caused by the spillover effect of pollution abatement technology. Even if Porter's hypothesis(1995) are given, we argue that it is not enough for the society to enjoy the benefits from the innovation with the strengthen of firms' competitiveness. To spread the benefits over economic agents in a society, especially including labor-owner, the current level of pollution abatement technology is important. When the level of pollution abatement technology is appropriate, both the environment protection and the job creation can be achieved through the government policy for environment protection.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.1
• /
• pp.62-70
• /
• 2020

Zygosaccharomyces rouxii is an important yeast that is required in the food fermentation process due to its high salt tolerance. In this study, the responses and resistance strategies of Z. rouxii against salt stress were investigated by performing physiological analysis at membrane level. The results showed that under salt stress, cell integrity was destroyed, and the cell wall was ruptured, which was accompanied by intracellular substance spillover. With an increase of salt concentrations, intracellular Na⁺ content increased slightly, whereas intracellular K⁺ content decreased significantly, which caused the increase of the intracellular Na⁺/K⁺ ratio. In addition, in response to salt stress, the activity of Na⁺/K⁺-ATPase increased from 0.54 to 2.14 μmol/mg protein, and the ergosterol content increased to 2.42-fold to maintain membrane stability. Analysis of cell membrane fluidity and fatty acid composition showed that cell membrane fluidity decreased and unsaturated fatty acid proportions increased, leading to a 101.21% rise in the unsaturated/saturated fatty acid ratio. The results presented in this study offer guidance in understanding the salt tolerance mechanism of Z. rouxii, and in developing new strategies to increase the industrial utilization of this species under salt stress.

• Journal of Labour Economics
• /
• v.39 no.4
• /
• pp.31-56
• /
• 2016

This study analyzes the effect of a minimum wage on the wage compression within Korean establishments. The results are as follows. Firstly, increases of a ratio of workers who get minimum wage within establishments have a effect to compress the wage distribution within establishments. Secondly, the establishment average wages get lower as their minimum wage ratios get larger. In this situation, high wage group's wages fall deeply than low wage group's these. Thirdly, the relative wages of high wage group to low wage group tend to be small as their minimum wage ratios get larger. To conclude, a increase of minimum wage has a effect to raise low wage workers' wages directly, and to reduce high wage workers' wages or increase rates indirectly. And the wage distributions are compressed as a result. So government's policy to increase minimum wage will have a result in reducing wage inequality.

• Journal of Technology Innovation
• /
• v.17 no.1
• /
• pp.69-95
• /
• 2009

This paper examines the motives for location decisions of startups and dynamics of cluster growth. Because the location decision is intrinsically strategic choice by entrepreneurs, it is an interplay of three critical forces; cost-benefit of the choice, R&D ability of new entrants, and R&D capability of incumbents in clusters. The effect of knowledge spillovers influences the cluster growth like a double-edge sword; both a positive effect of technology learning and a negative effect of knowledge de-learning. Using data on 710 bio-tech venture firms in Korea, this paper tests the hypotheses about the factors influencing the growth of the cluster. The empirical analyses suggested that early entrepreneurial activity in the clustered regions were important, however other factors such as the organizational legacy, internal dynamics inside a cluster, and the existence of cooperation norm in the cluster, affected long term viability of the cluster.

• Smart Structures and Systems
• /
• v.14 no.3
• /
• pp.327-345
• /
• 2014

This paper presents a composite control strategy for the active suppression of vibration due to the unknown disturbances, such as external excitation, harmonic effects and control spillover, as well as high-frequency accelerometer measurement noise in the all-clamped stiffened plate. The proposed composite control action based on the modal approach, consists of two contributions including feedback part and feedforward part. The feedback part is the well-known PID controller, which is widely used to increase the structure damping and improve its dynamic performance close to the resonance frequencies. In order to get better performance for vibration suppression, the weight matrixes is optimized by chaos sequence. Then an improved disturbance observer (IDOB) as the feedforward compensation part is developed to enhance the vibration suppression performance of PID under various disturbances and uncertainties. The proposed IDOB can simultaneously estimate the various disturbances dynamically as well as measurement noise acting on the system and suppress them by feedforward compensation design. A rigorous analysis is also given to show why the IDOB can effectively suppress the unknown disturbances and measurement noise. In order to verify the proposed composite control algorithm (IDOB-PID), the dSPACE real-time simulation platform is used and an experimental platform for the all-clamped stiffened plate active vibration control system is set up. The experimental results demonstrate the effectiveness, practicality and strong anti-disturbances ability of the proposed control strategy.

• Spatial Information Research
• /
• v.21 no.1
• /
• pp.37-44
• /
• 2013

This study sets the boundary of U-City industry based on expert surveys. Based on this U-City industry boundary, an appropriate inter-industry analysis is performed. The result shows production inducement coefficients, value added inducement coefficients, employment & enter employment inducement coefficients, influence coefficients and induction coefficients. Based on these coefficients, overall characteristics and spillover effects of U-City industry are examined. The result of this study shows that U-City industry has bigger value added-induced effects and employee-induced effects than other industry. The result also shows that U-City industry also has a great forward linkage effect. This study has a meaning that could be used to make political decisions as a basic data.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.3
• /
• pp.30-40
• /
• 2010

The freeway congestion is largely generated by a mainline spillover of the exit ramp queue. So it is necessary to study for modeling of the phenomenon and applying the model. In this study, the authors evaluated applicability of the Supply-Demand model, which can express traffic flow for the freeway by applying flexibly supply and demand curves for capacity of the freeway. First the authors proposed methods processing input data required in the Supply-Demand model, such as sending & receiving functions and time-varying capacity constraints for the freeway mainline. After modeling the Supply-Demand application model, the authors applied the model to the site including congested Hongeun exit ramp in Seoul Ring-road, and improved the model by adjusting application techniques and calibrating parameters. The result of the analysis showed that the Supply-Demand model yielded a queuing pattern and queue location similar to them observed in the field data, and applicability of the Supply-Demand model was varified.