• Structural Engineering and Mechanics
• /
• 제71권3호
• /
• pp.291-303
• /
• 2019

In the paper the analysis of natural vibrations of the transmission line with use of spectral elements and the laboratory experiments is performed. The purpose of the investigation is to analyze the natural vibrations of the transmission line and compare with the results obtained in the numerical simulations. Particular attention is paid to the hysteretic and aerodynamic damping analysis. Sensitivity of the wave number is performed for changing of the tension force, as well as for the different damping parameters. The numerical model is made using the Spectral Element Method. In the spectral model, for various parameters of stiffness, damping and tension force, the system response is checked and compared with the results of the accelerations obtained in the measurements. A frequency response functions (FRF) are calculated. The credibility of the model is assessed through a validation process carried out by comparing graphical plots of FRF and time history analysis and numerical values expressing differences in acceleration amplitude (MSG), phase angle differences (PSG) and differences in acceleration and phase angle total (CSG) values. The next aspect constituting the purpose of this paper is to present the wide possibilities of modelling and simulation of slender conductors using the Spectral Element Method. The obtained results show good accuracy in the range of both experimental measurements as well as simulation analysis. The paper emphasizes the ease with which the sensitivity of the conductor and its response to changes in density of spectral mesh division, tensile strength or material damping can be studied.

• 대한의용생체공학회:의공학회지
• /
• 제26권1호
• /
• pp.55-63
• /
• 2005

A novel imaging system for High-resolution Ultrasonic Transmission Tomography (HUTT) and soft tissue differentiation methodology for the HUTT system are presented. The critical innovation of the HUTT system includes the use of sub-millimeter transducer elements for both transmitter and receiver arrays and multi-band analysis of the first-arrival pulse. The first-arrival pulse is detected and extracted from the received signal (i.e., snippet) at each azimuthal and angular location of a mechanical tomographic scanner in transmission mode. Each extracted snippet is processed to yield a multi-spectral vector of attenuation values at multiple frequency bands. These vectors form a 3-D sinogram representing a multi-spectral augmentation of the conventional 2-D sinogram. A filtered backprojection algorithm is used to reconstruct a stack of multi-spectral images for each 2-D tomographic slice that allow tissue characterization. A novel methodology for soft tissue differentiation using spectral target detection is presented. The representative 2-D and 3-D HUTT images formed at various frequency bands demonstrate the high-resolution capability of the system. It is shown that spherical objects with diameter down to 0.3㎜ can be detected. In addition, the results of soft tissue differentiation and characterization demonstrate the feasibility of quantitative soft tissue analysis for possible detection of lesions or cancerous tissue.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권7호
• /
• pp.3239-3267
• /
• 2018

Image and video dehazing is a popular topic in the field of computer vision and digital image processing. A fast, optimized dehazing algorithm was recently proposed that enhances contrast and reduces flickering artifacts in a dehazed video sequence by minimizing a cost function that makes transmission values spatially and temporally coherent. However, its fixed-size block partitioning leads to block effects. The temporal cost function also suffers from the temporal non-coherence of newly appearing objects in a scene. Further, the weak edges in a hazy image are not addressed. Hence, a video dehazing algorithm based on well designed spectral clustering is proposed. To avoid block artifacts, the spectral clustering is customized to segment static scenes to ensure the same target has the same transmission value. Assuming that edge images dehazed with optimized transmission values have richer detail than before restoration, an edge intensity function is added to the spatial consistency cost model. Atmospheric light is estimated using a modified quadtree search. Different temporal transmission models are established for newly appearing objects, static backgrounds, and moving objects. The experimental results demonstrate that the new method provides higher dehazing quality and lower time complexity than the previous technique.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권1호
• /
• pp.322-340
• /
• 2012

Orthogonal Frequency Division Multiplexing (OFDM) is usually regarded as a spectral efficient multicarrier modulation technique, yet it suffers from a high peak-to-average power ratio (PAPR) problem. Among all the existing PAPR reduction techniques in OFDM systems, side information based PAPR reduction techniques such as partial transmit sequence (PTS) and selective mapping (SLM) schemes, have attracted the most attention. However, the transmission of side information results in somewhat spectral loss and this does not significantly improve the bit error rate (BER) performance. Parallel combinatory (PC) OFDM yields higher spectral efficiency (SE) and better BER performance on Gaussian channels,while is a little but not obvious PAPR improvement over the ordinary OFDM system. This investigation aimed to design a 'perfect' OFDM system. We introduce the side information to rotate the subcarrier phases of our novel PC-OFDM system structure, and call this new system the SIPC(Side information based Parallel Combinatory)-OFDM system. The proposed system achieves better PAPR and SE performance. In addition, considering the tradeoff of system parameters, the proposed system also has the properties of a higher BER.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.298-303
• /
• 2003

The eccentric rotor system has various problems by vibration of unbalance mass. Specially, it is difficult to analyze vibration problem for the drum washing machine due to correlation of transmission paths. We analyze the mechanical structure by multidimensional spectral density to identify the maximum vibration magnitude at the frequency domain. It estimates the coherence function of the signals to pass the transmission paths. In case of the drum washing machine, because the transmission paths are correlated partially it needs to determinate the priority ranking. And the correlated parts are eliminated using conditioned spectral density function. Finally the shielding effect method confirms the reasonability of the modeling.

• 한국항행학회논문지
• /
• 제18권5호
• /
• pp.455-460
• /
• 2014

장거리 광전송 시스템에서 그룹 속도 분산과 비선형 현상에 의한 왜곡을 보상할 수 있는 분산 제어 (DM; dispersion management)와 광 위상 공액 기술이 결합된 전송 링크의 최적 설계를 위한 성능 분석을 수행하였다. 즉 전체 전송 링크의 중간에 위치한 광위상 공액기 (OPC; optical phase conjugator) 양쪽의 전송 구획에서의 잉여 분산의 상호 관계가 최적 전체 잉여 분산 (NRD; net residual dispersion)에 미치는 영향을 살펴보았다. 시뮬레이션 결과 전반 전송 구획에서의 잉여 분산과 후반 전송 구획에서의 잉여 분산의 차이를 10 ps/nm로 하여 전체 전송 링크의 NRD를 10 ps/nm로 설정하여야 가장 우수한 보상이 이루어진다는 것을 확인하였다.

• Journal of Communications and Networks
• /
• 제13권3호
• /
• pp.240-249
• /
• 2011

Cooperative diversity protocols have attracted a great deal of attention since they are thought to be capable of providing diversity multiplexing tradeoff among single antenna wireless devices. In the high signal-to-noise ratio (SNR) region, cooperation is rarely required; hence, the spectral efficiency of the cooperative protocol can be improved by applying a proper cooperation selection technique. In this paper, we present a simple "cooperation selection" technique based on instantaneous channel measurement to improve the spectral efficiency of cooperative protocols. We show that the same instantaneous channel measurement can also be used for relay selection. In this paper two protocols are proposed-proactive and reactive; the selection of one of these protocols depends on whether the decision of cooperation selection is made before or after the transmission of the source. These protocols can successfully select cooperation along with the best relay from a set of available M relays. If the instantaneous source-to-destination channel is strong enough to support the system requirements, then the source simply transmits to the destination as a noncooperative direct transmission; otherwise, a cooperative transmission with the help of the selected best relay is chosen by the system. Analysis and simulation results show that these protocols can achieve higher order diversity with improved spectral efficiency, i.e., a higher diversity-multiplexing tradeoff in a slow-fading environment.

• 한국산업융합학회 논문집
• /
• 제4권1호
• /
• pp.35-40
• /
• 2001

A spectral measurement system for reflection and transmission properties by using an optical fiber and an ellipsoidal mirror was newly developed. The hemispherical reflectance and transmittance spectra of several heating resisting ceramics materials were measured from visible to middle infrared region. The directional characteristics of reflection and transmission were also investigated in consideration of the absorptance. The measured data were analyzed by using a four flux model of radiation transfer, The radiation properties could be estimated by the obtained scattering and absorption coefficient spectra.

• 한국전자파학회논문지
• /
• 제12권7호
• /
• pp.1157-1166
• /
• 2001

본 논문에서는 분산 천이 광섬유를 전송로로 채택한 10 Gbps, 20 Gbps, 40 Gbps 전송 시스템에서의 전력 대칭 MSSI(mid-span spectral inversion)에 의한 보상 정도를 변조된 광 펄스의 다양한 첩 파라미터에 따라 분석하였다. 우선 각각의 전송 속도에서 입력 전력 변화에 따른 수신단에서의 EOP(eye-opening penalty)를 계산하여 수신 성능을 양호하게 유지할 수 있는 최대 입력 전력의 크기를 첩 파라미터에 따라 살펴보았다. 또한 MSSI의 장거리 광대역 WDM 전송 시스템에의 적용 가능성을 확인해 보기 위하여 송신단부터 광 위상 공액기(OPC; optical phase conjugator)가지의 첫 번째 광섬유의 분산 계수 D$_{11}$ 변동에 따른 EOP의 고찰을 통해 수신 성능이 양호하게 유지될 수 있는 송신 과장의 범위를 살펴보았다. 본 논문에서 제안된 최적 펌프 전력 조건을 유지하는 MSSI 방법은 이상 분산(anomalous dispersion) 영역에서 변조 과정을 통해 광 펄스에 인가된 초기 첩이 up-chirp 인 경우보다 down-chirp인 경우에서 더욱 효과적임을 확인할 수 있었고. 장거리 WDM 전송에서 비트율에 따라 3.5 dBm 이상의 비교적 높은 전력으로 수~수 십 nm 이상의 광대역 전송이 가능하다는 것을 확인할 수 있었다.다.

• 한국광학회지
• /
• 제7권4호
• /
• pp.428-433
• /
• 1996

색분산 보상법으로 스펙트럼 반전법을 사용하여 10Gb/s 광신호의 200km 비분산천이 광섬유 전송실험을 수행하였다. 스펙트럼 반전 신호광은 분산천이 광섬유에서의 4광파 혼합 현상에 의해 발생되었다. 스펙트럼 반전 신호광의 반전효율과 신호대 잡음비는 각각 -26.7dB와 23.0dB였다. 수신감도 측정 결과 광섬유를 사용하지 않은 경우 BER $10^{-9}$에서 -28.0dBm이었고, 200km의 비분산천이 광섬유를 사용한 경우에 대해서는 -27.0dBm이었다.