• Transactions of the Korean Society of Mechanical Engineers
• /
• v.6 no.4
• /
• pp.331-340
• /
• 1982

Numerical analysis is made on the turbulent heat transfer with suspension of solid particles in circular tube with constant heat flux. The mean motion of suspending particles in mixture is treated as the secondary gas flow with virtual density and viscosity. Our modeling of turbulent transport phenomena of suspension flow is based on this assumption and conventional mixing length theory. This paper gives the evidence that the mixing length models can be extended to close the governing equations for two phase turbulent flow with solid boundary at a first order level. Results on Nusselt numbers obtained by analytical treatments are compared with available experimental data and discussed. They suggest that the most important parameters of two phase turbulent heat transfer phenomena are relative particle diameter to pipe diameter, gas-solid loading ratio, and specific heat of suspending material.

• Textile Coloration and Finishing
• /
• v.22 no.4
• /
• pp.314-324
• /
• 2010

The purpose of this study is to obtain the dyed-fabrics of the elaborate patterns using the natural dye powders extracted from Galla Rhois, Sophorae Flos Immaturus, Clove, Sappan Wood, Madder, Log Wood and Japanese Green Alder. Specific informations on the separation and powder-making of each colorant were disclosed. Appropriate printing paste preparation and printing conditions including the viscosity and mordant concentration in the printing paste were investigated. The dyeability and colorfastness of the screen-printed silk fabrics with the colorant powders were discussed in terms of practical applicability. The deodorization and antimicrobial activities of the silk fabrics screen-printed with natural dyes were also assessed.

• Korean journal of food and cookery science
• /
• v.10 no.4
• /
• pp.334-338
• /
• 1994

When total amount of water, including Takju(15%, w/w), was added differently in the ranges of 30 to 60% of the weight of rice flour, the specific volume of Jeungpyun had the highest value in the sample with 45% of water added. The Jeungpyun with 45% of water added also showed the best acceptability by means of taste evaluation. Dough viscosity was decreased by two stages of rapid and slow phase in logarithmic mode as total amount of water was increased and the turning point was observed at 45% of water.

• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1756-1766
• /
• 2003

Numerical modeling is carried out to investigate forced convective heat transfer to near-critical water in developing laminar flow through a circular tube. Due to large variations of thermo-physical properties such as density, specific heat, viscosity, and thermal conductivity near thermodynamic critical point, heat transfer characteristics show quite different behavior compared with pure forced convection. With flow acceleration along the tube unusual behavior of heat transfer coefficient and friction factor occurs when the fluid enthalpy passes through pseudocritical point of pressure in the tube. There is also a transition behavior from liquid-like phase to gas-like phase in the developing region. Numerical results with constant heat flux boundary conditions are obtained for reduced pressures from 1.09 to 1.99. Graphical results for velocity, temperature, and heat transfer coefficient with Stanton number are presented and analyzed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.2
• /
• pp.67-78
• /
• 1999

Recently, a greater part of all ship use a coarse heavy fuel oil(HFO) over specific gravity(S.G) 1.00/15$^{\circ}C$ and viscosity 3,500 cSt/4$0^{\circ}C$ as the fuel oil of marine boiler or internal combustion engine from the viewpoint of economical ship' operation. The greater plan to improve a combustion methods of heavy fuel oil, such as atomization, homogeneity and emulsification, were contrived and carried out newly, and then applied 20kHz ultrasonic homogenizer to one of test methods. Also, adopted the marine oils(fuel oil and lubricating oil etc.) and sludge oil as test solutions, and its matrix structures were examined with photographs, Especially, it is important at control system of oil pollution, for the sludge oil emulsified, to be recycled as fuel oil of boiler according to 20kHz Ultrasonic homozenizer, and then fuel saving is attained effectively by making sludge oil to be burnt.

• Journal of the Korean Applied Science and Technology
• /
• v.5 no.1
• /
• pp.53-62
• /
• 1988

Properties of aqueous solution, that is, the viscosities and solubilities of benzene were observed in relation to critical micelle concentration of each alkyl aldehyde polyoxyethylene glycol acetal type surfactant. These showed that the mininum points in specific viscosity/concentration-concentration curves were corresponded with the critical micelle concentration obtained by surface tension and appeared the remarkable increase of non-Newtonics according to the increase of the number of carbon in hydrophobic groups. The fluidity of non-Newtonics is not observed by a little increase of the degree of polymerization in polyoxyethylene glycol groups.

• Journal of the Korean Mathematical Society
• /
• v.45 no.3
• /
• pp.645-681
• /
• 2008

The Navier-Stokes system for heat-conducting incompressible fluids is studied in a domain ${\Omega}{\subset}R^3$. The viscosity, heat conduction coefficients and specific heat at constant volume are allowed to depend smoothly on density and temperature. We prove local existence of the unique strong solution, provided the initial data satisfy a natural compatibility condition. For the strong regularity, we do not assume the positivity of initial density; it may vanish in an open subset (vacuum) of ${\Omega}$ or decay at infinity when ${\Omega}$ is unbounded.

• Tribology and Lubricants
• /
• v.19 no.5
• /
• pp.285-291
• /
• 2003

Ultrasonic vibrator is an equipment which atomizes and homogenization the oils by breaking the oil particles with ultrasonic cavitation, and would improve the properties. The present study deal with the ultrasonic breaking systems which recycle the shipborne waste oil into usable oil to be burnt. The first place, experimental studies were carried out to investigate the homogenizing effect of the waste oils by ultrasonic cavitation. Variation of the properties(viscosity, specific gravity and pH) and the matrix structures for the various shipborne waste oils were interpreted to analyse the breaking, dispersion effects by ultrasonic cavitation. The experimental results can be useful to the development of waste oil disposing systems.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.2
• /
• pp.57-62
• /
• 1972

Natural actomyosin was extracted from the dorsal muscle of carp (Cyprinus carpio), and some Physico-chemical properties were determined. The sedimentation constant ($s_{20},\;_\omega$) of the purified skeletal muscle actomyosin was about 24.76s and the ATP sensitivity 147-176. The specific viscosity was rapidly ascended with the increase of protein concentration as other vertebrate actomyosins. ATPase activating site under the effect of pH variation was showed on the both sides of acid and base resembling with the tendency of rabbit skeletal muscle actomyosin, and found at 6.0 on the acidic side and at 9.5 on the basic side.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.2
• /
• pp.38-44
• /
• 2008

In the present paper, we theoretically analyze the flow of magnetic fluids in a circular pipe with a vertical magnetic field and investigate the magnetic response by the external magnetic field. Theoretical study through the governing equation derived by Siliomis is carried out with numerical analysis by the Gauss Elimination Method. Using polar and magnetic effect parameters, theoretical equations and distributions for the velocity, apparent viscosity as the magnetic response are shown. Especially, in the region of strong magnetic field the specific property is appeared by finding a critical magnetic effect parameter for a polar effect parameter.