• 제목/요약/키워드: specific resistance

검색결과 1,659건 처리시간 0.024초

선박용 알루미늄 합금재의 부식피로구열 진전특성에 관한 연구 (Study on the Characteristics of the Corrosion Fatigue Crack Propagation of Al-Alloy used for the Shipbuilding)

  • 임우조;이종락;이진열
    • 수산해양기술연구
    • /
    • 제24권2호
    • /
    • pp.94-100
    • /
    • 1988
  • 평면 굽힘부식피로 시험기를 사용하여 선박용 알루미늄합금재의 부식피로파양에 관한 연구를 한 결과 다음과 같은 결론을 얻었다. 1. 비저항이 증가함에 따라서 초기 부식피로균열발생까지의 반복회수는 지연되고, 그 부식감수성은 감소하는 양상을 나타낸다. 2. 비저항이 감소할수록 Paris rule의 실험상수 m 값은 작아지면서 응력강도 계수값에 비해 부식에 의한 영향이 더욱 민감해 진다. 3. 알루미늄 5086 합금의 부식피로균열은 입계균열파양의 양상을 보이고 있다. 4. 응력강도계수값이 증가함에 따라 부식감수성은 감소되어지고 응력강도계수값이 40kg.mm super(-3/2) 이상일 때 부식감수성은 거의 균일하게 된다.

  • PDF

해양환경중에서 A1-합금희생양극에 의한 음극방식특성 (A Study on the Characteristics of Cathodic Protection by Al-Alloy Sacrificial Anode in Marine Environment)

  • 이연호
    • 수산해양기술연구
    • /
    • 제28권1호
    • /
    • pp.53-60
    • /
    • 1992
  • In this study, cathodic protection experiment was carried out by Al-alloy sacrificial anode in marine environments which have specific resistance($\rho$) if 25~7000$\Omega$.cm and investigated protection potential, current density and loss rate of Al-alloy sacrificial anode. The main results resistance($\rho$) of 400$\Omega$.cm, the cathodic protection potential appears high about-720 mV(SCE). But below specific resistance($\rho$) of 300$\Omega$.cm, the cathodic protection potential appears low about-770 mV(SCE) and simultaneously, cathode is protected sufficiently. 2) The loss rate of Al-Alloy sacrificial anode became large with decreasing specific resistance and increasing the ratio(A sub(c)/A sub(a) of bared surface area of anode and cathode. 3) The loss rate of Al-alloy sacrificial anode(w) to the mean current density of anode(i) is as follows. w=ai+b (a, b : experimental constants)

  • PDF

Au/Te/Au/ n-GaAs구조의 열처리 효과 (The annealing effects of Au/Te/Au n-GaAs structure)

  • 정성훈;송복식;문동찬;김선태
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제9권10호
    • /
    • pp.1013-1018
    • /
    • 1996
  • The annealing effects of Au/Te/Au/n-GaAs structure was investigated by using x-ray diffraction, scanning electron microscope, the specific contact resistance and I-V measurement. Increasing the annealing temperature, the intensity of Au-Ga peak by X-ray diffraction was increased. The Ga$\_$2/Te$\_$3/peak got evident for the samples annealed at 400.deg. C and GaAs peak by recrystallization appeared for the samples annealed at 500.deg. C. The variation from the schottky to low resistance contact was confirmed by I-V curve. The lowest value of the specific contact resistance of the samples annealed at 500.deg. C was 3.8*10$\^$-5/.ohm.-cm$\^$2/ but the value increased above 600.deg. C.

  • PDF

우리나라 쟁기와 Plow의 산인저항의 관한 비교연구 (A Comparison Test of Eastern and Western Plow in Draft Resistance)

  • 최재갑
    • 한국농공학회지
    • /
    • 제12권3호
    • /
    • pp.2035-2042
    • /
    • 1970
  • Korean Janggi and Western plow to have developed for a long time in the east and west were tested and compared in their draft resistance. The charaderistic of Korean Janggi and plow to be able to make deep plowing, on of the most important factors influeneed the increased yield, were ofserved. The study was undertaken to obtain these basic factors' to device and construct the deep plowing Janggi. The results were as follow; 1. The draft resistance of Korean Janggi far less than that of plow and on the dry field, the influence of soil moisture contant to the draft resistance was larger in the Korean Janggi than in the western plow, but on the rice paddy, there was not differences between them. 2. The plow was more stable than that of Janggi in their operation. 3. The relation ship between the specific draft resistance and plowing depth was shown bygthe carved equation. $$K=Ax+\frac{B}{x}+C$$(K ; specific draft restance, x; plowing depth) A, B, C; Constant controled by soil and instrument factor) 4. Minimam values of the specific draft resistance were as follow; a. On the dry field; Korean Janggi; x = $8{\sim}14cm$ $4K=280{\sim}330gr/cm^2$$ Westean plow; x=$10{\sim}12cm$ $$K=480{\sim}490gr/cm^2$$ 6. On the rice paddy; Korean Janggi; x=$8{\sim}12cm$ $$K=255{\sim}280gr/cm^2$ Western plow; x=$7{\sim}10cm$ $$K=415{\sim}420grc/m^2$$

  • PDF

클로람페니콜 내성 플라스미드 pKH7의 Pre 단백질의 염기서열 결정 (Nucleotide Sequence of Pre Protein in Chloramphenicol Resistance Plasmid pKH7.)

  • 문경호;박봉동;이동석;이백락
    • 한국미생물·생명공학회지
    • /
    • 제26권6호
    • /
    • pp.566-568
    • /
    • 1998
  • Partial nucleotide sequence (nt 1-1842) of chloramphenicol resistance plasmid pKH7 has been reported previously and residual nucleotide sequence (nt 1843-4118) of pKH7 was determined and then the complete nucleotide sequence of pKH7 was obtained. pKH7 consists of 4118 bp and has three ORFs. Besides Rep and CAT proteins described in previous paper, Pre protein which mediates site-specific recombination in Staphylococcus aureus was found to be on pKH7. R $S_{A}$, a site-specific recombination site of Pre protein, and palA, a specific lagging-strand conversion signal, was also found in pKH7. Amino acid sequence of Pre protein of pKH7 was compared with those of other antibiotic resistant Staphylococcus aureus plasmids.s.

  • PDF

해양환경 중에서 Cr도금의 부식 특성에 관한 연구 (The Study on the Corrosion Characteristics of Cr Plating in Marine Environment)

  • 임우조;곽남인;윤병두
    • 수산해양기술연구
    • /
    • 제39권3호
    • /
    • pp.211-217
    • /
    • 2003
  • 해양환경의 비저항 변화에 따른 모재, Ni도금 및 Cr도금의 분극저항, 부식전류밀도, 부식억제율 및 분극지배기구에 관하여 연구한 결과 다음과 같은 결론을 얻었다. 1) Cr도금 및 Ni도금의 분극저항은 모재의 분극저항보다 더 높게 나타나고, 이들 재료의 분극저항은 비저항이 감소함에 따라 낮아진다. 2) 비저항이 낮아질수록 Cr도금 및 Ni도금의 부식전류밀도는 모재의 부식전류보다 더 억제됨에 따라 Ni 및 Cr도금의 부식억제율은 더 높게 된다. 3) 해양환경의 비정항에 따른 모재, Ni도금 및 Cr 도금의 부식반응은 음극지배로 판단된다.(이 논문의 결론부분임)

4 각보행로보트의 기계적 에너지 소모량 (Mechanical energy consumption of a four-legged walking vehicle)

  • 홍형주;김진연;윤용산
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
    • /
    • pp.63-68
    • /
    • 1987
  • In this study, a pantograph leg of the four legged walking vehicle is analysed with regard to mechanical energy consumption. Energy efficiency of the vehicle is estimated in terms of specific resistance varying body height, stride length and walking speed. The interaction between specific resistance and the parameters is investigated.

  • PDF

Molecular Mechanisms Involved in Bacterial Speck Disease Resistance of Tomato

  • Kim, Young-Jin;Gregory B. Martin
    • The Plant Pathology Journal
    • /
    • 제20권1호
    • /
    • pp.7-12
    • /
    • 2004
  • An important recent advance in the field of plant-microbe interactions has been the cloning of genes that confer resistance to specific viruses, bacteria, fungi or insects. Disease resistance (R) genes encode proteins with predicted structural motifs consistent with them having roles in signal recognition and transduction. Plant disease resistance is the result of an innate host defense mechanism, which relies on the ability of plant to recognize pathogen invasion and efficiently mount defense responses. In tomato, resistance to the pathogen Pseudomonas syringae pv. tomato is mediated by the specific recognition between the tomato serine/threonine kinase Pto and bacterial protein AvrPto or AvrPtoB. This recognition event initiates signaling events that lead to defense responses including an oxidative burst, the hypersensitive response (HR), and expression of pathogenesis- related genes.

Low Specific On-resistance SOI LDMOS Device with P+P-top Layer in the Drift Region

  • Yao, Jia-Fei;Guo, Yu-Feng;Xu, Guang-Ming;Hua, Ting-Ting;Lin, Hong;Xiao, Jian
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제14권5호
    • /
    • pp.673-681
    • /
    • 2014
  • In this paper, a novel low specific on-resistance SOI LDMOS Device with P+P-top layer in the drift region is proposed and investigated using a two dimensional device simulator, MEDICI. The structure is characterized by a heavily-doped $P^+$ region which is connected to the P-top layer in the drift region. The $P^+$ region can modulates the surface electric field profile, increases the drift doping concentration and reduces the sensitivity of the breakdown voltage on the geometry parameters. Compared to the conventional D-RESURF device, a 25.8% decrease in specific on-resistance and a 48.2% increase in figure of merit can be obtained in the novel device. Furthermore, the novel $P^+P$-top device also present cost efficiency due to the fact that the $P^+$ region can be fabricated together with the P-type body contact region without any additional mask.

분리막을 이용한 정수처리공정에서 유, 무기물질이 막오염에 끼치는 영향 (Membrane Fouling Effect with Organic-Inorganic Materials Using the Membrane Separation in Drinking Water Treatment Process)

  • 이용택;오중교
    • 멤브레인
    • /
    • 제13권4호
    • /
    • pp.219-228
    • /
    • 2003
  • 분리막을 이용한 정수처리 공정의 최적화를 위하여 유기물 성분인 humic acid와 탁도를 유발하는 kaolin을 모사 용액으로 제조하여 막내 비저항 값을 최소화하면서 flux의 안정된 경향을 나타내는 최적의 운전 조건을 검토하여 보았다. 그 결과 압력이 증가함에 따라 낮은 비저항값에서 효율적인 분리막을 운전할 수 있으며 선속도가 증가함에 따라 높은 전단율에 의해 cake load는 줄어들었으며 이에따라 비저항값과 flux는 증가하는 경향을 나타내었다. 따라서 최적의 운전조건은 압력 $2.0 kg_f/cm^2,$ 선속도 0.92 m/sec으로 알 수 있었다.