• 대한화학회지
• /
• 제55권5호
• /
• pp.746-750
• /
• 2011

Fluorescence correlation spectroscopy (FCS) is an emerging fluorescence technique used to study the dynamics of proteins on a millisecond to microsecond time scale at the single-molecule level. Solution pH-modulated protein conformational changes can be manifested by binding rate, fluorescence lifetime, and binding specificity of a probe molecule. The fluorescence lifetime of Nile red (NR) bound to apomyoglobin (apoMb) was measured to be $6{\pm}0.3$ ns, much longer than that in water solution ($2.9{\pm}0.2$ ns). As the unfolding population of apoMb increased by lowering pH of solution, the fraction for the longer lifetime of NR decreased with an increasing fraction for the shorter lifetime of NR in water. Unlike 1-anilino-8-naphthalene sulfonic acid, which has many lifetimes due to nonspecific binding to the unfolded apoMb, NR bound to apoMb possesses only a single lifetime. These results suggest that NR binds specifically to native apoMb and thus can be utilized to probe the folding/unfolding dynamics of apoMb using FCS.

• 전자공학회논문지CI
• /
• 제42권4호
• /
• pp.11-16
• /
• 2005

클래스 영역은 자바가상기계 내에서 각종 상수와 필드, 메소드 등이 위치하는 메모리공간의 한 부분이다. 임베디드 자바 시스템과 같이 제한적 메모리 자원을 갖는 시스템에서는 클래스 영역의 크기를 아는 것이 매우 중요하다. 본 논문에서는 이 영역의 크기를 예측할 수 있게 하는 일반적 수식을 유도하였다 이 수식은 구현되는 자바가상기계에 의존적인 몇 개의 상수들을 필요로 하는데, 우리는 이들 상수들이 몇 개의 간단한 탐침 클래스에 의해 구해질 수 있음을 보였다. 본 접근 방식의 정확성을 증명하기 위한 실험 결과도 함께 나타내었다.

• 생태와환경
• /
• 제40권1호
• /
• pp.149-154
• /
• 2007

남조류의 독성 잠재력을 확인하기 위해 microcystins 합성 유전자인 mcyB에 특이적으로 작용하는 TOX2P/TOX2M primer쌍을 이용한 whole-cell PCR을 실시하였다. 환경시료를 대상으로 한 실험 결과에서 TOX2P/TOX2M primer쌍은 약 1,000 $cells{\cdot}mL^{-1}$의 낮은 밀도에서 효과적으로 mcyB 유전자의 증폭에 성공하였으며, mcyB유전자를 지닌 종들은 모두 ELISA분석에 의해 microcystins의 생성이 확인되었다. 따라서, TOX2P/TOX2M primer쌍은 국내의 수체에서 독성 남조류의 신속하고 효과적인 검출을 위한 유용한 probe로 판단되었다.

• Journal of Mechanical Science and Technology
• /
• 제16권9호
• /
• pp.1147-1155
• /
• 2002

Discharge flows from a centrifugal pump impeller with a specific speed of 150 [rpm, m$^3$/min, m] were experimentally investigated. A large axisymmetric collector instead of a volute casing was installed to obtain circumferentially uniform flow, i.e. without interaction of the impeller and the volute. The unsteady flow was measured at the impeller exit and vaneless diffuser using a hot film probe and a pressure transducer. The flow at impeller exit showed pronounced jet-wake flow patterns. The wake, which was on the suction/hub side at high flow rate, became enlarged pitchwisely on both the hub and the shroud side as the flow rate decreases. The pitchwise non-uniformity of the flow rapidly decreased along the downstream and the non-uniformity almost disappeared at radius ratio of 1.18 for medium flow rate. The mean vaneless diffuser flow was reasonably predicted using a one dimensional analysis when an empirical constant was used to specify the skin friction coefficient. The data can be used for a centrifugal pump impeller design and validation of CFD codes and flow modeling.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.210-214
• /
• 2012

A microtiter well plate DNA hybridization method using Mycobacterium kansasii-specific rpoB DNA probe (kanp) were evaluated for the detection of M. kansasii from culture isolates. Among the 201 isolates tested by this method, 27 strains show positive results for M. kansasii, but the other 174 isolates were negative results for M. kansasii. This result was consistent with partial rpoB sequence analysis of M. kansasii and the result of biochemical tests. The negative strains by this DNA-DNA hybridization method were identified as Mycobacterium tuberculosis (159 strains), Mycobacterium avim (5 strains), Mycobacterium intracellulare (8 strains), and Mycobacterium flavescens (2 strain) by rpoB DNA sequence analysis. Due to high sensitivity and specificity of this test result, we suggest that DNA-DNA hybridization method using rpoB DNA probes of M. kansasii could be used for the rapid and convenient detection of M. kansasii.

• Transactions on Electrical and Electronic Materials
• /
• 제11권6호
• /
• pp.271-274
• /
• 2010

We examined the tunneling current behaviors of magnetic tunneling junction (MTJ) cells utilizing conductive atomic force microscopy (AFM) interfaced with an external magnetic field generator. By introducing current through coils, a magnetic field was generated and then controlled by a current feedback circuit. This enabled the characterization of the tunneling current under various magnetic fields. The current-voltage (I-V) property was measured using a contact mode AFM with a metal coated conducting cantilever at a specific magnetic field intensity. The obtained magnetoresistance (MR) ratios of the MTJ cells were about 21% with no variation seen from the different sized MTJ cells; the value of resistance $\times$ area (RA) were 8.5 K-12.5 K $({\Omega}{\mu}m^2)$. Since scanning probe microscopy (SPM) performs an I-V behavior analysis of ultra small size without an extra electrode, we believe that this novel characterization method utilizing an SPM will give a great benefit in characterizing MTJ cells. This novel method gives us the possibility to measure the electrical properties of ultra small MTJ cells, namely below $0.1\;{\mu}m\;{\times}\;0.1\;{\mu}m$.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.438-443
• /
• 2006

The probe type sensor using strain gauges was used to track a container box's seam in this paper. A strain gauge has a property which the specific resistance is changed by varying of the sectional area and length when tensile and compressive stresses are generated at the strain gauge. We designed the automatic seam tracking device by attaching the probe type strain gauge sensor, motor driving slide, encorder to check the moving distance and interface card connected MPU upside the speed controllable carriage. The folded work piece for a container box is made to examine whether the device can track the seam automatically or not. Seam tracking experiments were done by changing the carriage moving speed at 300. 400. 500. 600[mm/min] each as the voltage of side track was 2.5[V]. We compared and analyzed the sampling data which is obtained by output voltage of strain gauge sensor and rotary encorder pulse every 100 [m/s]. The welding experiments were performed by using $CO_2$ welding machine about the carriage moving speed that has good seam tracking condition in the seam tracking experiments above. And we compared the seam tracking status.

• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.560-570
• /
• 2005

In this paper, a microelectrode away DNA chip was fabricated on glass slide using photolithography technology. Several probe DNAs consisting of mercaptohexyl moiety at their 5' end were immobilized on the gold electrodes by DNA arrayer utilizing the affinity between gold and sulfu. Then target DNAs were hybridized and reacted with Hoechst 33258, which is a DNA minor groove binder and electrochemically active dye. Cyclic voltammetry in 5mA ferricyanide/ferrocyanide solution at 100 mV/s confirmed the immobilization of probe DNA on the gold electrodes. Linear sweep voltammetry or cyclic voltammetry showed a difference between target DNA and control DNA in the anodic peak current values. It was derived from Hoechst 33258 concentrated at the electrode surface through association with formed hybrid. It suggested that this DNA chip could recognize the sequence specific genes. It suggested that multichannel electrochemical DNA microarray is useful to develop a portable device for clinical gene diagnostic system.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.323-323
• /
• 2012

We present ferroelectricity of Bi-doped ZnO film probed by piezoresponse force microscopy (PFM), which is one of the Scanning Probe Microscopy techniques. Perovskite ferroelectrics are limited to integration of devices into semiconductor microcircuitry due to hard adjusting their lattice structure to the semiconductor materials. Transition metal doped ZnO film is one of the candidate materials for replacing the perovskite ferroelectrics. In this study, ferroelectric characteristics of the Bi-doped ZnO grown by pulsed laser deposition were probed by PFM. The polarization switching and patterning of the ZnO films were performed by applying DC bias voltage between the AFM tips and the films with varying voltages and polarity. The PFM contrast before and after patterning showed clearly polarization switching for a specific concentration of Bi atoms. In addition, the patterned regions with nanoscale show clearly the local piezoresponse hysteresis loop. The spontaneous polarization of the ZnO film is estimated from the local piezoresponse based on the comparison with LiNbO3 single crystals.

• 열처리공학회지
• /
• 제35권1호
• /
• pp.1-7
• /
• 2022

In this study, dissolution and melting phenomenon of the Al₂Cu was studied for the high-strength Al-Si-Cu aluminum alloy in automobile component. The Solution heat treatment was performed at 480℃ and 510℃ for 4hours. Microstructure analysis of the specimen was performed using the optical micrograph and scanning electron microscope for qualitative and quantitative analysis of various phases, the chemical composition of secondary phases was achieved by energy dispersive spectroscopy (EDS) and electron probe micro analysis (EPMA). As a result of the electron probe micro analysis, a plate like Al₂Cu phase was observed, and eutectic Si phase was observed of a coarsen plate shape. At a temperature of 510, necking phenomenon occurs in a specific part of plate like Al₂Cu, and it is segmented and dissolved in the Al matrix. When the temperature of the alloy exceeds the melting point of Al₂Cu, incipient melting occurs at the grain boundary of undissolved Cu particles