• Earthquakes and Structures
• /
• v.15 no.3
• /
• pp.253-261
• /
• 2018

This article details a bridge-specific fragility method developed to enhance the seismic design and resilience of bridges. Current seismic design processes provide guidance for the design of a bridge that will not collapse during a design hazard event. However, they do not provide performance information of the bridge at different hazard levels or due to design changes. Therefore, there is a need for a supplement to this design process that will provide statistical information on the performance of a bridge, beyond traditional emphases on collapse prevention. This article proposes a bridge-specific parameterized fragility method to enable efficient estimation of various levels of damage probability for alternative bridge design parameters. A multi-parameter demand model is developed to incorporate bridge design details directly in the fragility estimation. Monte Carlo simulation and Logistic regression are used to determine the fragility of the bridge or bridge component. The resulting parameterized fragility model offers a basis for a bridge-specific design tool to explore the influence of design parameter variation on the expected performance of a bridge. When used as part of the design process, these tools can help to transform a prescriptive approach into a more performance-based approach, efficiently providing probabilistic performance information about a new bridge design. An example of the method and resulting fragility estimation is presented.

• Management & Information Systems Review
• /
• v.24
• /
• pp.1-24
• /
• 2008

This paper examines the direct effects of board independence and also its interaction effects with CEO's firm specific experience on firm performance. The findings in an hierarchial regression analysis of multiyear sample of computer hardware companies indicate that independent, outsider directors are beneficial to firms' performance when CEO has high-level of firm specific experience whereas it is harmful when CEO has low-level of firm specific experience. However, separating the positions of board chair and chief executive officer that has been used as another means for increasing board independence does not influence to firms' performance. These findings imply that researchers in corporate governance should reconsider the relative weight placed on directors' monitoring and assistance role. Rather than focusing predominantly on directors' willingness or ability to control executives, in future research scholars should yield more productive results by focusing on the assistance directors provide in bringing valued resources to the CEOs and in serving as a source of advice and counsel especially for CEO's improvement of management technique. In addition, they should pay more attention on identifying intervening processes between board and firm performance in order to provide optimal governance mechanisms and configurations to practitioners.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.873-879
• /
• 2000

Experimental investigation was conducted to study the effects of pitch angle maximum camber on the performance and noise of an axial-flow fan used in outdoor-unit of air -conditioner. For this study the axial-flow fan whose pitch angle can be varied was made and the Specific sound Pressure Level and other coefficients were measured using the anechoic fan tester. It is found that pitch angle affects more severly than the maximum camber on the fan performance. On the while the maximum camber affects much on the specific sound power level. Present results show that it is important to choose the optimum pitch angle and maximum camber to design the high-performance and low-noise axial-flow fan and specific noise measured in the anechoic fan tester can be sued effectively for the design of low-noise fan.

• Korean Journal of Cognitive Science
• /
• v.28 no.3
• /
• pp.133-147
• /
• 2017

Human perception is an outcome of the influence of various factors rather than objective reflection of external environment. Among the factors, action-specific perception is a phenomenon where perception changes in terms of one's ability to act on the environment. Previous research reported contradictory results regarding whether action-specific perception occurs during performance or after performance due to memory distortion or knowledge about performance results. In this research, we conducted three experiments to determine when action-specific perception occurs. Participants threw darts at different distances and reported perceived size of targets in each trial. The results showed that, in Experiments 1 and 2, participants perceived targets larger when they hit than missed the targets, and the effect was greater when the targets were not visible after each throw. However, because participants had knowledge about the results of their throws, there could have been bias in participants' responses. In Experiment 3, where this possibility was excluded, we also obtained action-specific perception, and therefore concluded that action-specific perception occurs during but not after task performance.

• The KSFM Journal of Fluid Machinery
• /
• v.10 no.4
• /
• pp.21-28
• /
• 2007

The ratio of disk friction loss in a centrifugal pump is very large for the total pump loss in the range of very low specific speed. Therefore, impeller radius should be shortened to increase the pump efficiency because the disk friction loss is proportional to the fifth power of impeller radius. In order to compensate the decreased head by the shortened impeller radius, vane angle at impeller outlet should be increased. However, as the vane angle at impeller outlet becomes larger, performance instability occurs at low flow rate regions. In this study, J-Groove is adopted to suppress the performance instability and detailed examination is performed for the influence of the J-Groove on the pump performance. The results show that J-Groove gives good effect on the suppression of performance instability. Moreover, as J-Groove increases pump head considerably, the pump size can be smaller for head requirements.

• Journal of ILASS-Korea
• /
• v.9 no.4
• /
• pp.9-16
• /
• 2004

A study of the propeny and performance effect of Indolene - Methanol Plus High Alcolhols (MPHA) has been completed. This study invested the measurement of fuel properties and performance parameters. The fuel properties investigated are distillation characteristics, heating valuer flash point, specific gravity and water tolerance. The performance parameters measured are minimum advance for best torque (MBT) spark timing, power output. The alcohol concentration was varied from 0 to 100 percent by volume in clear Indolene. The measurement of fuel properties indicated that, in general, Indolene - MPHA blends have higher water tolerance, similar specific gravity, similar flash point and different distillation characteristics compared to Indolene - Methanol blends. The performance parameters were measured using a single cylinder spark ignition engine at different compression ratios. The results of the performance measurements indicated that Indolene - MPHA blends have a higher MBT spark advance, similar power output.

• Phonetics and Speech Sciences
• /
• v.15 no.3
• /
• pp.83-88
• /
• 2023

This study investigates the fine-tuning of large-scale Automatic Speech Recognition (ASR) models, specifically OpenAI's Whisper model, for domain-specific applications using the KsponSpeech dataset. The primary research questions address the effectiveness of targeted lexical item emphasis during fine-tuning, its impact on domain-specific performance, and whether the fine-tuned model can maintain generalization capabilities across different languages and environments. Experiments were conducted using two fine-tuning datasets: Set A, a small subset emphasizing specific lexical items, and Set B, consisting of the entire KsponSpeech dataset. Results showed that fine-tuning with targeted lexical items increased recognition accuracy and improved domain-specific performance, with generalization capabilities maintained when fine-tuned with a smaller dataset. For noisier environments, a trade-off between specificity and generalization capabilities was observed. This study highlights the potential of fine-tuning using minimal domain-specific data to achieve satisfactory results, emphasizing the importance of balancing specialization and generalization for ASR models. Future research could explore different fine-tuning strategies and novel technologies such as prompting to further enhance large-scale ASR models' domain-specific performance.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2413-2422
• /
• 1994

The effects of compressor design conditions on the off-design performance of a single-shaft gas turbine engine have been studied. Three different geometric design conditions are considered and three different values for the specific mass flow rate at the inlet to the compressor are assumed. For each of nine compressor design, the off-design performance of the gas turbine engine is predicted using the method previously proposed by present authors. Results show that the predicted off-design performances are quite different from each other even though they have the same performance at design point: it means that compressor design conditions should be determined in consideration of the off-design performance of the engine. The specific mass flow rate at the inlet to the compressor is also shown that it might be optimized with respect to the net power of the engine.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.5
• /
• pp.32-36
• /
• 2012

The positive displacement pump and the regenerative pump are widely used in the range of low specific speed, $n_s{\leq}100$[rpm, m3/min, m]. The positive displacement pump is not suitable for miniaturization and operation in high rotational speed. The regenerative pump has a problem with large leakage flow and low efficiency. While the centrifugal pump has advantages of high efficiency, miniaturization and high rotational speed, efficiency drops sharply with decrease in specific speed. Therefore the purpose of this study is to design a new type of centrifugal pump that has advantages of centrifugal pumps in operation in low specific speed. The name of this new type of pump was called 'Pipe type centrifugal pump', since the flow path through the impeller is simple circular pipe. Due to the simple shape of impeller, the manufacturing process is simple and cost is low. There is strong jet flow at the outlet of the impeller. This jet induces flow path loss, meridional dynamic pressure loss and mixing loss. Large disk friction makes the efficiency be limitted in the range of low specific speed. Even though the loss and the low efficiency, 'Pipe type centrifugal pump' represents stable performance, affordable pressure ratio and efficiency better than that of other low specific speed pumps.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.1
• /
• pp.17-24
• /
• 2013

In this paper, we present a multi-core processor including multimedia specific instructions to process multimedia data efficiently in the mobile environment. Multimedia specific instructions exploit subword level parallelism (SLP), while the multi-core processor exploits data level parallelism (DLP). These combined parallelisms improve the performance of multimedia processing applications. The proposed multi-core processor including multimedia specific instructions is implemented and tested using a Xilinx ISE 10.1 tool and SoCMaster3 testbed system including Vertex 4 FPGA. Experimental results using a fire detection algorithm show that multimedia specific instructions outperform baseline instructions in the same multi-core architecture in terms of performance (1.2x better), energy efficiency (1.37x better), and area efficiency (1.23x better).