• 한국게임학회 논문지
• /
• 제9권1호
• /
• pp.115-125
• /
• 2009

최근 그래픽 하드웨어는 눈부신 발전을 거듭하였으며, 이에 따라 국내의 게임 유저들은 사실 감과 생동감이 넘치는 화려한 게임 그래픽을 요구하고 있다. 그래픽 특수효과는 이러한 요구를 만족시킬 수 있는 방법 중 하나이지만, 특수효과를 재사용할 수 있는 일반적인 형태로 구현된 사례는 없었다. 본 논문에서는 그래픽 특수효과 엔진의 구현과 그 적용 사례를 통하여 게임에 그래픽 특수효과를 쉽게 적용할 수 있음을 기술한다. 특수효과 데이터를 표준 파일 포맷으로 저장 및 로드함으로서 특수효과의 재사용이 가능하고, 그래픽 특수효과 편집툴을 이용하여 게임 제작 이전이라도 특수효과의 테스트 및 시연을 할 수 있다.

• 한국멀티미디어학회논문지
• /
• 제7권10호
• /
• pp.1464-1477
• /
• 2004

최근 3D 게임의 개발이 활발해지면서 이를 지원하기 위한 저작도구에 대한 관심이 높아지고 있다. 본 논문에서는 개발된 3D게임 제작용 저작도구를 소개한다. 개발된 저작도구는 맵 에디터, 사운드 에디터, 데이터 추출기 및 프리퓨어, 특수효과 에디터로 구성되어진다. 게임 디자이너는 본 저작도구를 이용하여 게임 맵, 사운드 및 특수효과 등과 같은 게임 데이터를 효율적으로 제작할 수 있다. 본 논문에서는 개발된 저작도구를 활용하여 실험용 컨텐츠를 만들어 저작도구의 유용성을 검증하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.209-216
• /
• 2006

For evaluation of building performance, a nonlinear dynamic capacity of the building is a key parameter. In this study, an reinforced concrete special moment resisting frame building was chosen to study the process of determining the nonlinear dynamic capacity. The building, which was designed by IBC 2003 representing new codes, was composed of special moment resisting frames in the perimeter and internal frames inside the building. The capacity, which is inter-story drift capacity, consists of two categories, local and global collapses. Global collapse capacity was determined by incremental dynamic analysis. Local collapse capacity was determined by the same method except for utilizing damage index. In audition to this, it was also investigated that the effect of including internal frames designed by gravity load in the analysis. Results showed that the damage index is a useful tool for determining local collapse. Furthermore, including the internal frames with special frames in the analysis is very important in determining the capacity of a building so both must be considered at the same time.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.63-68
• /
• 1996

In this study, the effect of tool rake angles and the change of cutting conditions on specific cutting pressure in face milling is investigated. The cutting force in face milling is predicted from the double cutting edge model in 3-dimensional cutting. Conventional specific cutting pressure model is modified by considering the variation of tool rake angles. Effectiveness of the modified cutting force model is verified by the experiments using special face milling cutters with different cutter pockets and various rake angles. From the comparison of the pressented model and the specific cutting pressure, it is shown that the axial force can be predicted by the tangential and redial forces without the knowledge of friction angle and shear angle. Also, the relation between specific cutting pressure and cutting cindition including feedrate, cutting velocity and depth of cut is studied.

• Journal of the Korean Wood Science and Technology
• /
• 제16권4호
• /
• pp.54-60
• /
• 1988

Machinabilities means inherent properties of pinus densiflora at Chunyang district to be CNC machined easily or not, and processing abilities of the tool and machine together. This explanation signifies that machinabilities have two phases of signification, depended on considering and stress either materials or tools preferentially. This paper discuss machinabilities, the following items are usually employed as the indices of stress distribution at the cutting tool rake face. The stress distributions on the chip - tool contact surface at the early stage of the chip forming and under the stage of fringe pattern in wood cutting were analyzed the photoelastic method. The tool used in the present experiment was the special cutting tool H.S.S. one made in laboratory. And isochromatic fringe pattern and isolinic line of work piece by chip-behavior during the cutting operation were photographed with the feed camera continuously. The effects on the stress, distribution on the rake face of the epoxy tool and the strain distribution in the work piece of wood plate by chip behavior are cleared in pre cent experiment.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제48권1호
• /
• pp.21-32
• /
• 2009

The purpose of this study is to diagnose the current states and the problems of student assessment of Elementary School Mathematics. For that purpose, this study conducted a survey and had the individual interviews. The surrey items consisted of the six main parts: questions about the development of assessment tools, the method to assess, the grading, the special supplementary courses, the opening of learning effect, and the follow-up guidances. The results of this study are as the follow First, elementary teachers depended heavily on internet sites for developing assessment problems. Second, elementary teachers made use of a performance assessment, a unit assessment, and a term examination at ordinary times. Third, unit assessment was largely referred for grading by elementary teachers. Fourth, in selecting the students for the special supplementary courses, both criterion-referenced assessment and norm-referenced assessment were considered. After finishing the special supplementary courses, additional tests were usually taken. Fifth, elementary teachers took a negative attitude in opening of learning effect. specialty opening of test paper to parents of students was done under 30%. Sixth, fellow-up guidances were the most through the classroom guidances. but consulting with parents of students was not frequently conducted by teachers.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3390-3397
• /
• 2022

Among the different techniques available, nuclear methods, including gamma-gamma logging tools, are of special importance. Though the real environment which surrounds the drilled borehole is a complex fractured medium which the fluid can flow through the porosities, simulation studies generally use the traditional model of a homogeneous mixture of formation and the liquid. Considering a previously published study, which shows that modeling of fluid flow in fractured reservoirs and simulating the formation as an inhomogeneous fractured medium leads to different results compared with those of homogeneous mixture, here we study the effect of the presence of drilling fluid (mudcake) on the response of the detectors in both the models. To study this effect, a typical gamma-gamma logging tool was modeled by using the MCNPX Monte Carlo code. The results show that the responses of the detectors in the mixture model in the presence of various thicknesses of mudcake are sensitive to the density of the formation material. However, this effect is not notable in the inhomogeneous fractured medium. These results emphasize the importance of the model employed for simulation of the medium in gamma-gamma well-logging.

• Journal of Welding and Joining
• /
• 제34권3호
• /
• pp.6-11
• /
• 2016

Joining Al/Fe dissimilar metals is becoming a subject of special interest in the assembly of automotive parts as a trade-off between the weight lightening and the cost reduction. Although various studies have been introduced to join Al alloy with the steel sheet by fusion welding, weak joint strength and galvanic corrosion still remained as problems to be solved. As a solid state welding, friction stir welding has been preferred to fusion welding processes in the dissimilar metal joints. This study investigated friction stir spot welding (FSSW) of Al alloy to the thin steel sheet with a thickness of 0.65 mm. The conventional FSSW is a stationary spot welding process but new approach adopted an additional circumferential movement in company with high speed tool rotation. A full factorial experimental design was implemented, and the main and interaction effects of parameters were analysed on the failure load in the tensile shear test. The direction and radius of rotation were statistically significant parameters and these two parameters affected the joint width and the shape of the hook.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.569-575
• /
• 2014

In this study, the effect of cutting edge geometry, such as helix and rake angles, on surface roughness in ball-end milling is investigated by using the Taguchi method. A set of experiments adopting the $L_{27}(3^{13})$ design with an orthogonal array are conducted with special WC ball-end mills having different helix and rake angles. Analysis of variance (ANOVA) is performed to analyze the effects of tool geometry and machining parameters, such as cutting speed, feed per tooth, and depth of cut, on surface roughness. The ANOVA results reveal that helix and rake angles are critical factors affecting surface roughness; the interaction of helix angle and cutting speed is also important. This research can contribute to novel cutting edge designs of ball-end mills and optimization of cutting parameters.

• 대한환경공학회지
• /
• 제30권12호
• /
• pp.1225-1230
• /
• 2008

이 논문에서는 팔당호에 행해진 수질관리 정책의 효과를 분석하기 위하여 계절 맨-켄달 경향분석법(Seasonal Mann-Kendall Trend Analysis)을 사용한 새로운 접근법으로 팔당호로 유입되는 주요 지류중 하나인 경안천의 수질을 정책 전과 후로 나누어 비교 분석하였다. 1992년부터 2005년까지 월별로 측정된 BOD, COD, 총인 및 총질소의 자료들을 이용하여 1998년 한강특별대책 시행 전과 후의 켄달 기울기(Kendall slope)를 비교하였고, 그 결과 한강특별대책이 경안천 하류의 수질 개선에는 효과가 있었으나 상류의 수질 개선에는 큰 효과를 거두지 못하였음을 밝혀냈다. 이러한 결과는 이전에 행해진 경안천 수질 관련 연구들의 결과와 잘 일치하는 것으로 보아, 이 연구에서 사용된 수질의 장기 경향 분석을 통한 정책의 효과를 판단하는 접근법은 앞으로 유용하게 사용되어 질 수 있으리라 판단된다.