• Journal of Ginseng Research
• /
• 제26권3호
• /
• pp.111-131
• /
• 2002

본 총설은 1980년대부터 최근까지 국내외 학술잡지나 심포지움 등에 발표된 인삼의 주요 임상효능 연구결과를 요약 고찰하고, 그 임상 적응증과 안전성 등에 대한 검토를 통해 금후 인삼의 임상적 활용성 제고와 인삼의 진정한 약용가치 평가를 위한 임상연구의 발전에 도움을 주고자 하였다. 당뇨병을 비롯한 동맥경화성 질환, 고혈압, 악성질환, 성기능 장애 등의 만성질환에 대한 그 동안의 연구결과는 인삼의 치료효과보다는 예방 및 회복제로서의 효용성을 보여 주었다. 특히 이들 질환의 각종 자각적 장해증상과 장기 약물치료의 부작용으로 인한 QOL의 악화에 에 대한 개선효과가 관찰되었다. 그러나 인삼의 효과는 일반적으로 mild 하여 일차적 치료보다는 관행적 약물요법과 병용할 때 보조요법제로서 또는 부작용을 보다 적게 하는 효과가 기대된다. 또한 주요 강장효능과 관련하여 작업수행능력에 미치는 임상연구 결과는 인삼복용이 각종 스트레스 상태하의 신체적 조건에 대한 적응능력을 개선시켜 육체적 정신적 기능저하를 회복시키는 효과를 보였다. 이러한 임상시험에서 얻어진 결과가 그대로 인삼의 적응증(indication)이라고 단정할 수는 없으며, 그 효능의 과학적 증거들에 대해서는 아직도 논란이 많고, 임상실험의 유효성 평가와 관련된 방법론적 문제점도 많이 지적되고 있다. 보다 확실한 적응증 제시를 위해서는 표준화된 인삼시료를 이용하여 보다 체계적인 시험설계에 의한 객관적 효능평가가 필요하다. 한편 인삼(제품)복용에 의한 부작용(adverse effects)의 발생 가능성에 대한 사례보고들도 대부분 인삼의 과량복용이나 품질관리 미흡에서 기인되는 것으로 여겨지고 있다. 최근 해외 시장에서 유통되는 인삼제품 품질검사에서 사포닌 성분의 불검출 또는 함량 미달과 유해성분의 오염가능성 등 부정적 견해들이 다수 보고되었다. 그러나 표준화된 인삼제품의 추천 복용량을 사용한 대부분의 임상실험에서는 거의 유의할만한 부작용은 인정되지 않았다. 금후 연구와 관련하여, 품질표준의 지표성분으로 간주되는 진세노사이드의 절대함량과 그 성분조성 차이에 따른 임상효과의 차별성이 있는지에 대한 검토와, 특히 최근 실험적으로 밝혀지고 있는 사포닌 성분의 장내 세균에 의한 생물전환체의 인체 실험을 통한 효과 검정이 필요하다. 나아가서는 적정 복용량의 설정과 이와 관련되는 생체내 동태 및 생체이용율(bioavilability)에 관한 정보가 거의 없으므로 이것도 금후 검토해야 할 과제로 사료된다. 인삼은 전통약물로서 오랜 역사성과 그동안의 연구결과에 의한 과학성을 가지고 있으므로 건강유지와 병의 예방 및 회복촉진을 위한 보조요법제 또는 기능성 식품으로써의 유용성이 있는 것으로 판단된다. 앞으로 인삼의 활용성 증대를 위해서는 보다 과학적인 임상평가에 의한 안전성 및 유효성 입증과 제품의 엄격한 품질관리의 필요성이 더욱 강조되어야 할 것이다.

• 헤리티지:역사와 과학
• /
• 제51권2호
• /
• pp.170-203
• /
• 2018

호남지역은 일제강점기부터 현재까지 한일 고고 고대사학 연구자 사이에서 항상 큰 관심을 받았던 지역이다. 근래 이 지역에서 왜계 고고자료 발견 사례가 양적 질적으로 급증하고 있기 때문에 선행 연구와 견해를 재검토할 필요가 커지고 있다. 전방후원형 고분은 기존에 13기로 알려졌지만 최근 발견 사례가 17기까지 증가했다. 한 곳에서 3기가 조영된 사실도 새롭게 밝혀졌으며, 또 일본의 고분시대(古墳時代)를 특징짓는 형상식윤(形象埴輪)이 처음으로 발견됐다. 호남지역 출토 왜계 고고자료에 대한 선행연구는 특정 자료나 특정 유적 유구에 한정된 사례가 많았다. 본고에서는 호남의 모든 왜계 고고자료를 대상으로 수량 고고자료의 종류 출토 위치를 파악한 후 그 변천을 추적하였다. 시기별 특징이나 변화상 등을 바탕으로 왜와 마한세력의 관계 의도 동향을 문헌 자료 등과 관련시켜 검토하였다. 호남지역 출토 왜계 고고자료는 5세기 전엽부터 증가 및 광범위한 분포를 보여주며 7세기 초까지 이어졌다. 4세기 말~5세기 전엽에는 왜계 무구와 왜계 매장주체부, 5세기 중엽~후엽에는 수혜기(須惠器)(계(系)), 5세기 말~6세기 전엽에는 전방후원형 고분과 왜계 횡혈식석실, 6세기 중엽~7세기 초에는 왜계 무구 석침이 중심을 이루어 시기마다 양상이 변화했음을 알 수 있었다. 4세기 말~5세기 전엽의 왜계 고고자료에 대해서는 이 시기에 집중된 백제와 왜의 왕래 기사를 근거로 외교 사절단을 수행했을 무인계층과의 관련성을 상정했다. 5세기 중엽~후엽에는 수혜기(須惠器)(계(系)) 토기가 호남 내륙부로 확산되었다. 물자의 집적에 유리한 지점에서 주로 출토되는 경향이 엿보인다. 전방후원형 고분의 피장자를 북구주(北九州) 제세력에 속한 왜인을 중심으로 한 교역자 집단으로 해석했다. 전방후원형 고분은 대체로 기본적으로 기존 수장묘가 조영되지 않던 지역에서 특별한 세력 기반 없이 돌연 출현했다. 그러나 재지인의 협조 없이 전방후원형 고분을 축조하기란 불가능했을 것이다. 이는 일본 현지와 호남지역 전방후원형 고분의 구축 기술 차이를 보아도 알 수 있다. 한편 일부 전방후원형 고분은 재지 수장묘와 동시기 아니면 직후에 조영되었다는 점에서 재지 집단과의 밀접한 관련성을 추정할 수 있다. 5세기 초 금관가야가 몰락하자 왜 제국(諸國)은 새로운 교섭 상대로 호남지역을 선택하였다. 그 배경에는 왜에서 구하기 어려운 (지하)자원이나 물자를 확보해야 할 절실한 필요가 있었을 것이다. 약 200년에 걸쳐서 사용되고 매장된 호남지역의 왜계 고고자료는 왜인의 다양한 교섭 노력과 관련된 것으로 판단된다.

• 한국엔터테인먼트산업학회논문지
• /
• 제15권8호
• /
• pp.19-31
• /
• 2021

본 연구는 기존 문헌연구들을 중심으로 엔터테인먼트 산업 분야의 대학생 창업의도 특성들을 파악하고자 하였다. 이를 바탕으로 대학 창업담당 관계자들과 국가 창업지원 정책 담당자들에게 대학생 창업을 위한 현실적인 교육 대안 및 창업 경영에 관한 시사점을 제시하고자 하였다. 따라서 본 연구의 시사점은 다음과 같다. 첫째, 엔터테인먼트 산업에 필수적인 요소인 아이디어 창출 교육을 위한 기술(아이템) 아이디어와 제품으로의 연결 방법, 컨텐츠 가치를 높일 수 있는 기술 방법, 엔터테인먼트 산업 내 사용자 특성 교육을 지속적으로 해야 할 것이다. 또한 아이디어 교육과 함께 자금조달, 인적자원관리, 마케팅, 운영관리 등 창업 경영관리에 대한 이해도를 높이고, 나아가 엔터테인먼트 창업에 대한 성공가능성 및 새로운 일에 대한 모험심이 생길 수 있도록 자신감 교육도 함께 이루어져야 할 것이다. 둘째, 창업에 관심이 있는 학생 의견조사를 중심으로 창업에 필요한 공간 및 장비제공(동아리실, 학생창업실, 엔터테인먼트관련 장비확보 등)이 이루어져야 하고, 학생 창업을 위한 대학 및 정부의 각종 규제들을 완화해야 할 것이다. 또한 학내 외 창업 지식형성을 위한 교육과 전문가 특강 및 자문, 현장 교육 등을 통해 보다 실용적인 창업 지식이 만들어질 수 있도록 노력해야 하고, 다양한 지원들을 바탕으로 학생들의 창업에 대한 자신감도 형성할 수 있도록 만들어 주어야 할 것이다. 셋째, 엔터테인먼트 산업에 대한 창업을 희망하는 학생들에게는 가족들에게 엔터테인먼트 산업에 대한 현장 상황을 정확히 알려줌으로써 자녀들이 창업분야를 선택하는데 있어 부정적인 인식보다는 긍정적인 인식이 발생할 수 있도록 적극 알릴 필요가 있다. 또한 대학생들이 창업 후 성공한 다양한 사례들을 가족들에게 홍보함으로써 자녀가 창업에 대한 도전정신이 발생할 수 있도록 가족들이 힘을 보태게 해야 할 것이다. 넷째, 엔터테인먼트 산업 분야 쪽으로 창업을 희망하는 친구들과의 지속적인 동호회나 모임들이 형성 될 수 있도록 만들어 주어야 하고, 나아가 이런 모임을 통해 실제로 창업한 친구들의 의견을 청취하는 기회도 마련해야 할 것이다. 또한 모임과 친구 형성으로 인해 사업계획서 작성, 창업 성공 방법, 창업 경영관리에 대한 논의의 자리가 형성되도록 만들어 주어야 하고, 서로 창업에 대한 의지가 발생할 수 있도록 심리적 자극활동도 이루어져야 할 것이다. 다섯째, 창업과 관련한 다양한 지식(자금 확보 방안, 창업조직 관리, 창업하고자 하는 시장에 대한 정보 파악 등)들이 배양될 수 있도록 노력해야 할 것이고, 자신들이 창업하고자 하는 다양한 엔터테인먼트 산업 분야에 대한 사업계획서 작성 방법도 실무에 맞도록 학습 시켜야 할 것이다. 또한 이런 지식 형성을 밑바탕으로 학생들 스스로가 창업에서 발생할 수 있는 위험과 변화에 대응할 수 있도록 만들어 주어야 할 것이다. 마지막으로 창업 경영관리에 대한 이해도를 높여 주어야 하고, 창업에 대한 자신감과 두려움이 사라지게 할 수 있는 다양한 심리적 자극 활동이 필요하다.

• Asia Marketing Journal
• /
• 제14권2호
• /
• pp.65-96
• /
• 2012

루머는 신뢰할 만한 타당한 근거나 이유가 없음에도 불구하고 광범위하게 이야기되는 일상적인 대화나 의견으로서 오랜기간 소비자 개개인의 사적 영역의 문제였다. 그러나 대중의 사랑과 주목을 받는 기업이나 브랜드는 선천적으로 소비자의 관심으로부터 멀어질 수 없으며, 항상 루머의 주요한 소재가 되어 왔다. 그 결과 현대의 소비자 커뮤니케이션 환경에서 루머는 기업 경영활동에 중요한 위기 요인이 되고 있다. 기업과 브랜드들이 당면하는 소비자 루머들은 크게 기업과 관련된 음모성 루머와 상품과 직접적 관련이 있는 오염성 루머로 나누어지며 국내외에서 많은 위기 사례들이 발견되고 있다. 심지어 P&G, SK, 현대, 삼성처럼 잘 정비된 홍보 조직을 갖춘 굴지의 대기업들조차 이런 루머로부터 자유롭지 못하며, 기존의 대응방식 역시 적절하지 못했던 것이 사실이다. 부정적 루머가 주목받아야 하는 이유는 해당 기업의 매출 및 점유율 하락은 물론 주식 가격에도 부정적인 영향을 미치며 오랜기간 구축해온 소비자와의 관계마저 황폐화시킬 가능성이 있기 때문이다. 최근 인터넷, 소셜 네트워크 서비스의 확산과 더불어 브랜드와 관련된 루머의 중요성은 더욱 증대하고 있으나 루머 연구는 지금까지 기업이나 마케팅 연구자의 정당한 주목을 받지 못하였다. 이에 본 연구는 루머의 다각적인 측면을 고려하는 상황주의자적 연구 패러다임을 기반으로 지각된 유용성, 원천 신뢰성, 메시지 신뢰성, 걱정, 생동감과 같은 루머와 관련된 속성들이 루머 수용강도와 루머 구전의도에 미치는 영향을 분석하였다. 이를 위하여 가상 브랜드와 루머가 제시되었으며, 실증조사를 통한 데이터 수집과 분석이 이루어졌다. 연구 결과에 따르면 원천 신뢰성, 메시지 신뢰성, 걱정, 생동감 같은 루머 특성 변수들은 루머 수용 강도에 유의한 영향을 미치고, 루머 수용강도는 루머 구전의도에 유의한 영향을 미치는 것으로 나타났다. 반면에 지각된 중요성은 루머 수용강도에 유의한 영향을 미치지 못하며, 상품 관여도의 조절효과 역시 유의하지 않은 것으로 나타났다. 본 연구는 주요한 실무적, 학문적 시사점을 제공하고 있다. 첫째, 루머를 자연발생적인 사회 현상이 아니라 소비자의 주요 활동의 일부이며, 마케터의 관심과 대응 커뮤니케이션 전략이 필요한 브랜드 관련 현상임을 주장하였다. 둘째, 브랜드 루머의 심리적, 사회적인 다차원적 구성 요인과 확산되는 경로를 제시함으로서 루머에 대한 능동적인 관리 가능성을 제시하였다. 셋째, 온라인상의 루머 활동이 기업 성과에 미치는 영향을 제시함으로서 기업들의 적극적인 온라인 커뮤니케이션 활동과 평판 관리의 필요성을 주장하였다. 넷째, 소비자의 걱정과 같은 부정적 정서가 루머의 온상이 되고 있음을 규명함으로서 소비자의 의혹을 불식시키기 위하여 정확하고 진실된 정보를 제공해야 함을 주장하였다. 다섯째, 루머의 유용성이 확산에 미치는 영향 가설이 기각되었으며, 상품 관여도의 조절 효과 역시 기각되었다. 이는 루머를 접하는 소비자의 입장에서 볼 때, 루머 자체가 무의미하더라도 단순한 재미나 호기심만으로도 얼마든지 확산될 가능성을 암시하고 있다. 일부 기업들은 사실이 아니라는 이유만으로 루머를 무시하거나 간과하는 경우들이 있으나, 기업의 예상과 다르게 루머가 얼마든지 확산될 수 있는 가능성을 보여주며, 기업의 보다 세심한 대응 전략의 필요성을 요구하고 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.13-44
• /
• 1982

7.1 옛날부터 재목(材木)을 오래 불에 담그어 쓰면 덜트로 덜 휜다고 하였는데 말로서 전(傳)하여 왔을 뿐 그 연구결과(硏究結果)나 또는 그 원인(原因)에 대한 것은 분명(分明)치 못하였다. 한편 재목(材木)의 추출성분(抽出成分)이 그 재목(材木)의 물리적(物理的) 성질(性質)에 영향(影響)할 것이라는 추측(推測)은 많었으나 실지로 그 영향(影響)에 대한 연구(硏究)를 하여 그 결과(結果)와 그 원인(原因)을 밝힌 것도 극(極)히 적었다. 이 연구(硏究)는 이와같은 입장(立場)에 놓여있는 그 간미지(間未知)한 점(点)을 밝히기 위(爲)하여 다시말하면 재목(材木)을 물에 담그어 그 수용성(水溶性) 추출물(抽出物)을 추출(抽出)하므로써 일어나는 물리적(物理的) 성질(性質)에 대한 결과(結果)를 조사(調査)하고 이 결과(結果)를 통(通)하여 얻는 진리(眞理)를 응용(應用)하여 재목(材木)의 일대 흠점(欠点)인 수축(收縮), 팽창(膨脹) 이에따라 일어나는 트는것, 휘는것, 틀어지는 것 등(等)을 막아 재목이용(材木利用)의 합리화(合理化)를 기(期)할 목적(目的)으로써 시작(始作)된 것이며 Yale 재과대학(材科大學) 목재이용학(木材利用學) 연구실(硏究室)에서 담당교수 F.F.Wangaard 박사(博士) 지도하(指導下)에 재료(材料)는 동(同) 연구실(硏究室)에 준비(準備)되어 있는 북미(北美)산 스트로 - 부 소나무 참나무 그리고 남방열대(南方熱帶)산 하이메나에아의 삼(三) 종류(種類)에 대하여 연구(硏究)되었다. 7.2 연구(硏究)의 대상이 된 물리적(物理的) 성질(性質)은 목재(木材)의 실용적 사용(使用)에 있어서 가장 관계가 깊은 다시 말하면 트고 휘고 틀어지는등(等)의 관계가 깊은 평형함수량(平衡含水量), 수축(收縮), 팽창(膨脹) 그리고 강도(强度)의 지표(紙票)가 되는 비중(比重)등이 있다. 7.3 시험(試驗)은 위에 말한 세 가지 종류(種類)를 가지고 추출처리(抽出處理)를 하여 추출(抽出)한것과 반대로 추출성(抽出性) 물질(物質)은 침투(浸透)시킨것에 대하여 비교(比較)될 무처리(無處理)한 세 다른 공시재(供試在)를 준비(準備)하여 실시되었다. 다음 시험결과(試驗結果)는 7.4 수용성(水溶性) 추출물(抽出物)이 추출량(抽出量)과 그 추출액중(抽出液中)의 성분(成分)그룹은 Table 36에 표시(表示)된것과 같으며 나무 종류(種類)에 따라 추출량(抽出量)에 그리고 각(各) 성분(成分)그룹의 종류(種類)와 그 양(量)에 차이(差異)를 볼수 있었다. 7.5 평형함수량(平衡含水量)에 있어서는 a) 추출처리(抽出處理)를 하여 그 추출성분(抽出成分)이 빠져버린 공시재(供試材)와 그와 반대의 공시재(供試材) 사이에는 확실한 차이(差異)가 있어 추출성분(抽出成分)을 재내(材內)에 포함(包含)하고 있으므로써 같은 관계흡도에서 80%방습시(放濕時)는 이와 반대 평형함수량(平衡含水量)은 많아졌다. b) 설탕액(雪糖液)에 담그어 침투처리(浸透處理)를 하여 당분(糖分)이 재내(材內)에 침입(侵入)된 공시재(供試材)는 대체(大體) 추출처리(抽出處理)를 하지 않은 공시재(供試材)와 거의 같은 경향(傾向)의 결과(結果)를 나타내고 있다. c) 나무의 종류(種類)에 따른 차이(差異)는 일정한 경향(傾向)을 볼 수 없으나 스트로-부 소나무의 심재부(心材部)와 변재부를 비교(比較)하면 심재부(心材部)는 그 평형함수량(平衡含水量)이 적다. 이것은 원래(元來)의 함수량(含水量)에 있어서 심재부(心材部)가 적은데 이와같은 차이(差異)는 식물생리학적(植物生理學的) 또는 그 해부학적(解剖學的) 구조(構造)의 차이(差異)에서 생기는 것이다. 7.6 수축(收縮)에 있어서는 a) 추출처리(抽出處理)를 한 공시재(供試材)의 수축량(收縮量)은 그와 반대로 추출처리(抽出處理)를 않어 추출성분(抽出成分)이 그대로 남어있는 공시재(供試材)에 비교(比較)하여 그 수축량(收縮量)이 모두 크다. b) 설탕액(雪糖液)에 담그어 침투처리(浸透處理)를 한 공시재(供試材)는 그 수축량(收縮量)은 다른것에 비교(比較)하여 제일 적고 모두 침투처리(浸透處理)를 하지않은 공시재(供試材)와 거의 같은 결과(結果)를 보이고 있는데 이것은 재목(材木)을 사용전(使用前)에 특수(特殊)한 침투처리(浸透處理)를 하여 쓰면 재목(材木)의 일대 흠점(欠点)인 수축(收縮)을 막을수 있다는 것을 실증하는 것이다. c) 나무의 종류별(種類別)로보면 스트로-부 소나무의 심재부(心材部)는 그 변재부보다 수축량(收縮量)이 적으며 참나무의 수축량(收縮量)은 제일 크로 스토로-부 소나무에 비교(比較)하여 약(約)2배(倍) Hymenaea는 참나무 보다 적고 스트로 - 부 소나무 보다는 컸다. d) 각(各) 수종(樹種)을 통(通)하여 방향성(方向性)에 따른 수축량(收縮量)을 보면 촉단면방향(觸斷面方向)의 수축량(收縮量)은 경단방향(徑斷方向)의 수축량(收縮量)보다 큰 것은 다른 모든 나무에서 보느 결과(結果)와 같다. e) 추출량(抽出量)과의 관계를 보면 추출량(抽出量)이 많은 것일수록 추출처리(抽出處理)를 않은 것과의 수축량(收縮量)의 차이(差異)는 컸다. 7.7 팽창(膨脹)에 있어서는 a) 추출처리(抽出處理)로 그 성분(成分)을 추출(抽出)하여 낸 공시재(供試材)의 팽창량(膨脹量)은 그와 반대의 것에 비교(比較)하여 모두 팽창량(膨脹量)이 컸다. b) 재목(材木)의 방향성(方向性)에 따라보면 모두 촉단(觸斷) 방향(方向)의 팽창량(膨脹量)은 경단방향(徑斷方向)의 팽창량(膨脹量)에 비(比)하여 크다. c) 수축(收縮)에서 본것과 같이 팽창(膨脹)에 있어서도 나무의 종류(種類)에 따라 그 팽창량(膨脹量)에 차이(差異)를 볼수 있으며 그 팽창량(膨脹量)은 참나무 하이메나에아 스트로-부 소나무의 변재 그리고 동심재(同心材)의 순서(順序)도 적어졌으며, 수축량(收縮量)이 큰 것은 팽창량(膨脹量)에 있어서도 크다는 것을 실증하였다. 7.8 비중(比重)에 있어서는 a) 추출처리(抽出處理)를 한 공시재(供試材)의 비중(比重)이 추출처리(抽出處理)를 않은 공시재(供試材)의 비중(比重)에 비교(比較)하여 컸다. 이것은 비중(比重)을 결정(決定)할 때 사용(使用)된 용적(容積)에 기인(起因)하였으며 사실은 이와 반대의 결과(結果)가 나타나야 할 것이다. b) 나무의 종류별(種類別)로 보면 스트로-부 소나무의 심재(心材)는 변재보다는 그 비중(比重)이 크며 두 참나무의 비중(比重)은 소나무의 그것보다 배(倍)나 크고 하이메나에아는 그 비중(比重)이 제일 컷다. (9) 이상(以上) ; 모-든 시험결과(試驗結果)를 종합(綜合)하여 생각할 때 막연(漠然)히 재목(材木)을 물에 오래 담그어 쓴다는 생각은 오히려 잘못하면 목재(木材)의 성질(性質)을 더욱 악화(惡化)시킬 우려(憂慮)가 있으며 물에 담그어 쓰되 설탕질등(雪糖質等)으로 재목내부(材木內部)에 침투(浸透)할 수 있는 성질(性質)의 성분(成分)이 용해(溶解)되어 있는 액중(液中)에 담그어 쓰는 것은 재목(材木)의 일대 흠점(欠点)인 수축(收縮)과 팽창(膨脹) 그리고 이에 따라 일어나는 트고 휘는 일이며 틀어지는 등(等)의 흠점(欠点)을 막을 수 있다는 것을 실증하게 되었다. 만고(萬苦) 물속에 오래 담그어 쓰는 것이 다시 말하면 수용성(水溶性) 추출물(抽出物)을 빼내어 쓰는 것이 그 결과(結果)에 있어 확실히 양호(良好)하였다는 사실이 있었다면 그것은 수용성성분(水溶性成分)을 제출(提出)함으로써 균일(均一)한 수축(收縮)과 팽창(膨脹)이 일어나는데 기인(起因)하였을 것이다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.