• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.3
• /
• pp.108-113
• /
• 2004

This paper presents methods to improve performance of the power supply system in a NASA deep space explorer. In the Stirling engine driven reciprocating Brushless DC (BLDC) generator, the accurate position information of the prime mover is important to diagnose the performance of the engine and prevent distortion of the output power. Since sensors to detect the position are fragile and unreliable, and conventional sensorless techniques have drawbacks in the low speed region, a novel sensorless position detection technique for the prime mover has been proposed and verified. Another major issue of the generator for the spacecraft is power density maximization. The mass of the power system is important to the mass of the satellite. Therefore, the components of the spacecraft should be lightweight. Conventional rectification methods cannot achieve the maximum power possible due to non-optimal current waveforms. The optimal current waveform for maximizing power density and minimizing machine size and weight in a nonsinusoidal power supply system has been derived, incorporated in a control system, and verified by simulation work.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.165-169
• /
• 2000

High level vibrationional environments induced while launching of spacecraft can damage sensitive equipment or payloads, unless the equipment is properly designed. This is a critical issue for KOMPSAT-2 which will carry a high resolution electro-optic camera and a sophisticated attitude and orbit control system. Thus careful consideration on the launch environment is required in the design stage of spacecraft. This requires generation of vibration specification for each component. This paper describes the generation process of vibrational specification for KOMPAT-2, which is designed and tested by Korean engineers.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.51-59
• /
• 2005

In this paper, results of a multiple spacecraft formation-keeping control using the orbital relative motion and optimization technique are presented. To analyze and predict the relative motion between the formation-flying satellites, a closed-form orbit propagator obtained using the method of ephemeris compression is used. This closed-form orbit propagator is combined with optimization technique to plan a series of impulsive maneuvers, which maintain the formation configuration within the specified limit. As an example, this method is applied to the problem of maintaining the projected circular formation geometry and results from nonlinear simulation are presented.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.2
• /
• pp.281-295
• /
• 1994

In this paper, the Variable Structure System(VSS) theory with new continuous switching dynamic equation is used to design an automatic controller for the active nutation damping in momentum bias stabilized spacecraft. In the application of VSS theory to a linearized multivariable system with the nutation damping systems, there exist some disadvantages such as how to determine the switching gains and how to reduce the chattering phenomina and reaching phase in input and state trajectories. To solve these drawbacks, this paper presents the continuous switching dynamic equation instead of the discontinuous switching logics to obtain the sliding mode. The new design approach is much simpler than the VSS theory. And there do not exist chattering phenomina in this method because the obtained control inputs are continuous. Simultaneously the reaching phase is reduced by a suitable choice of design factor.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.84-96
• /
• 2002

The major goal of this research is to use as a baseline guide for a flight model design of power system of next domestic communication satellite. For this purpose, the EPS(Electrical Power Subsystem) is designed to compliance performance requirements specified in EPS subsystem specification during all expected spacecraft operations. The regulated electrical power bus gives 42.5V to the various spacecraft loads from PCDU(Power Control & Distribution Unit) and the solar arrays are composed of 6 panel, each panel has 3 circuits including 7 string. The battery system is comprised of two batteries consisting of 26 IPV(Individual-Pressure-Vessel) NiH2 cells. Each battery can be capable of delivering 2878Watt-hours at a 80% maximum DOD(Depth of Discharge) based on the nameplate capacity of 150 amper-hours.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.10
• /
• pp.852-860
• /
• 2003

We introduce the error models for an attitude determination system(ADS) with gyroscopes and stellar sensor. The ADS error models are derived according to the definition of the reference frame and of the attitude error. The equivalent error models applicable to the attitude determination system with large attitude errors are presented. The simulation results show that the proposed error models improve performance of the attitude determination system.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2283-2285
• /
• 2003

This paper present design and specification of the EPS(Electronic Power Subsystem) Control Unit of the KOMPSAT2 spacecraft. we designe ECU with the 80386 processor and compare KOMPSAT-2's performance with KOMPSAT-1's.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.669-677
• /
• 2009

In general, the pitch momentum biased system that induces inherently nutational motion in roll/yaw plane, has been adapted for geosynchronous communications satellites. This paper discusses the method of roll attitude control using yaw axis momentum management method for a low earth orbit(LEO) satellite which is a pitch momentum biased system equipped with only two reaction wheels. The robustness of wheel momentum management method with PI-controller is investigated comparing with wheel torque control method. The transfer function of roll/yaw axis momentum management system that is useful for attitude controller design is derived. The disturbance effect of roll/yaw axis momentum management system for attitude control is investigated to identify design parameters such as magnitude of momentum bias and to get the insight for controller design. As an example, the PID controller design result of momentum management system for roll/yaw axis control is provided and the simulation results are presented to provide further physical insight into the momentum management system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.10
• /
• pp.823-832
• /
• 2014

Displaced non-Keplerian orbit, center of mass is displaced from orbit plane, enables special spacecraft missions. It requires continuous thrust to maintain the orbit, and solar sail is useful for this purpose. Equations for feasible region and stability analysis are derived for non-Keplerian orbit for general continuous thrust. Differences for solar sail spacecraft are discussed. Non-keplerian orbits are classified into four types. Location-specific required accelerations for orbit maintenance are calculated. Orbit stabilities of each orbit type are analyzed and verified by numerical simulations. In order to control non-Keplerian orbit in unstable region, a control algorithm using the real-time LQR control is developed and evaluated by numerical simulations.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.8
• /
• pp.639-651
• /
• 2018

An analytical solution to generate attitude command profile for agile spacecraft is proposed. In realistic environment, obtaining analytical minimum-time optimal solution is very difficult because of following constraints-: 1) actuator saturation, 2) flexible mode excitation, 3) uplink command bandwidth limit. For that reasons, this paper applies two simplifications, an eigen-axis rotation and a finite-jerk approximated profile, to derive the solution in an analytical manner. The resulting attitude profile can be used as a feedforward or reference input to on-board attitude controller, and it can enhance spacecraft agility. Equations of attitude command profile are derived in two general boundary conditions: rest-to-rest maneuver and spin-to-spin maneuver. Simulation results demonstrate that the initial and final boundary conditions, in terms of time, attitude, and angular velocities, are well satisfied with the proposed analytical solution. The derived attitude command generation algorithm may be used to minimize a number of parameters to be uploaded to spacecraft or to automate a sequence of attitude command generation on-board.