• 대한산업공학회지
• /
• 제24권1호
• /
• pp.137-144
• /
• 1998

Block stacking, which involves the storage of unit loads in stacks within storage rows, is typically used in traditional warehouses to achieve a high space utilization at a low investment cost. In this paper, assuming that the demand size from a customer is an i.i.d. random variable, we develop a probabilistic block stacking storage model and its algorithm for a singles product, which minimizes the time-overage floor space requirement under an (s, S) inventory policy and the violation of the FIFO lot rotation rule only in a single partially-occupied row.

• 건축역사연구
• /
• 제7권1호
• /
• pp.67-80
• /
• 1998

As a result of this study, an attempt to emphasize the effect of perspective through the factors of spatial constitution is considered that, in Mwaeom thought, the establishment of the basic situation for cherishing the religious experience as Seonjae Dongja's course of ascetic practice, was needed. Therefore, placing of gates, terrace make-up and the changing spaces and constitution that the space under a castle moves from narrow darkness to wide brightness, express the steps of the course of ascetism. Through this, it gives observers dramatic changes and expectation to their sensual feeling. The emphasis on the perceptibility of Muryang Sujeon, Anyang Loo and the terrace by using a perspertive technique can be interpreted as an intention to express the very delightedness at the last moment the truth is perceived.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2529-2533
• /
• 1999

This paper proposes a modified hysteresis current control method based on space vector modulation. The proposed method differs from former works in that it uses effective voltage vectors instead of zero vectors while not significantly increasing the circuit complexity. The circuit uses outer band that is slightly wider than the usual current limit band (inner band) to detect the phase of current command and thereby the region information. The comparator output signals associated with the inner and outer band are used to determine the proper voltage vector that minimizes the current error and number of switching, with simple logic circuitry. The utilization of effective voltage vector is of particular importance when the ac-side emf is relatively large. Both the simulation and experiment show that the proposed method is more effective than the conventional one that uses zero vectors, in reducing the number of switching over a range of ac-side emf variation.

• Journal of Power Electronics
• /
• 제12권2호
• /
• pp.276-284
• /
• 2012

AC/AC power conversion is widely used to feed AC loads with a variable voltage and/or a variable frequency from a constant voltage constant frequency power grid or to connect critical loads to an unreliable power supply while delivering a very balanced and accurate sinusoidal voltage system of constant amplitude and frequency. The load specifications will clearly impose the requirements for the inverter stage of the power converter, while wider ranges of choices are available for the rectifier. This paper investigates the utilization of a buck-type current source rectifier as the active front-end stage of an AC/AC converter for applications that require an adjustable DC-link voltage as well as elimination of the low-frequency common mode voltage. The proposed solution is to utilize a combination of two or more zero current vectors in the Space Vector Modulation (SVM) technique for Current Sources Rectifiers (CSR).

• Journal of Construction Engineering and Project Management
• /
• 제5권1호
• /
• pp.32-39
• /
• 2015

Construction industry is an aggregate of information that diverse information is integrated and controlled. To implement successful construction projects, it can be said that the information management is very important. In particular, because information of construction sites is controlled in a form of documents, importance of the document management in construction has been increased. But, by controlling information through documents, there are difficult problems in writing and classification of the documents and preservation and utilization of the information. Also, due to incompletion of the information management system, difficulty in systematic info management arises. For this reason, this study intends to suggest the document information breakdown structure for controlling document info efficiently which is generated at construction sites. For this, through the examination of preceding studies, establishment of the concept of the document info breakdown structure, the space breakdown structure, and the info breakdown structure, availability of document information is intended to heighten.

• 대한전기학회논문지
• /
• 제37권6호
• /
• pp.350-360
• /
• 1988

As the capacity of DC motor is increased, we should recheck several encountered problems like volume increase. Particularly, when a large DC motor should be installed within the limited space, it is necessary to minimize the volume of motor for the effective utilization of the limited space. This paper describes the procedure and the method of finding optimum design of a large DC motor. The result of the optimization will decide the basic dimensions of a large DC motor. The flexible tolerance method and polyhedron searching method are used in this optimization. This result of simulation of the existing large DC motors is compared with the data of the existing large DC motors to confirm the validity of this optimum design.

• 대한전기학회논문지
• /
• 제43권6호
• /
• pp.885-895
• /
• 1994

In this paper, we propose the one-Ampere conductor method which is able to calculate the flux distribution conceptually and easily, and the improved winding method which suppresses space harmonics of magnetormotive force and enhances the coefficient of utilization of primary iron core in tubular linear induction motor. We carry out no-load test to verify effectiveness of proposed method and analyze characteristics by finite element method. As a result, performances are improved and propriety of primary iron core is enhanced comparing with conventional model.

• 산업기술연구
• /
• 제20권B호
• /
• pp.147-154
• /
• 2000

This paper proposes an overmodulation strategy for space-vector PWM(SVPWM). The overmodulation strategy increases a fundamental output voltage and improves a voltage utilization up to the maximum in the overmodulation region. To maintain a linearity of the relation between a reference voltage and a fundamental output voltage, this paper suggests a compensation voltage, whose magnitude or phase is modified to the proposed control scheme. The practical implementation is simple and it is applied to improve an output voltage of SVPWM controlled AC Motor in the steady-state. The characteristic of the proposed strategy is confirmed by simulations and experiments for a V/F control of a induction motor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.527-533
• /
• 1998

An optimized PWM switching strategy for an induction motor voltage control is developed and demonstrated. Space vector modulation in voltage source inverter offers improved DC-bus utilization and reduced commutation losses, and has been therefor recognizedas the perfered PWM method, especially in the case of digital implementation. Three-phase invertor voltage control by space vector modulation consists of switching between the two active and one zero voltage vector by using the proposed optimal PWM algorithm. The prefered switching sequence is defined as a function of the modulation index and period of a carrier wave. The sequence is selected by suing the inverter switching losses and the current ripple as the criteria. For low and medium power application, the experimental results indicate that good dynamic response and reduced harmonic distortion can be achieved by increasing switching frequency.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2989-2994
• /
• 2008

The shopping center in underground passage for efficient space utilization is increased in urban area. This study describes operation characteristics of HVAC systems with ventilation and individual heating and cooling unit for shopping center in underground passage. In order to compare energy saving, thermal environment and installation space, etc., an integrated simulator with heat production and distribution system was designed and constructed. Energy delivery efficiency is improved over 20%, and energy saving of the hybrid system is calculated as over 30% compared to conventional all air type in the case of heating. And also the results showed that humidity decreased about $5{\sim}6%$, also characteristics of thermal control is improved over 34%.