• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.489-492
• /
• 2005

As a former level of MSC(Multi Spectral Camera) telescope of the KOMPSA T2satellite, the several performance tests of EOS(Electro Optical Subsystem) were performed in the EOS level. By these tests, not only the design requirement of payload can be verified but also the test result can be the important criterion to estimate the performance of payload in the launch and space orbit environment. The EOS Geometric Mapping test is to verify the accuracy of the alignment & assembly on the Subsystem of the MSC by measurement like these; LOS(Line of Sight), LOD(Line of Detector), Band to Band Registration, Optical Distortion and Reference Cube. This paper describes the test results and the analysis for the EOS Geometric Mapping.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.8
• /
• pp.2110-2121
• /
• 1993

A numerical investigation has been carried out for the flow characteristics after exchange of some filters from the original layer to the new low pressure loss layer with equal filtering efficiency. The solution domain includes upper plenum, filter layer, clean space, access panels, and lower plenum. The concept of the distributed pressure resistance was applied to describe the momentum loss in filter layer and access panels. The evolution of the flow field is simulated using the low Reynolds number k-.epsilon. over bar turbulent model and SIMPLE algorithm based on the finite volume method. As a result, after the exchange of filter layer the power requirement can be reduced by 8-9 percent. The results also demonstrate that the perpendicularity of the flow near access panels may become worse at new filter layer than origianl filter layer. But the situation can be recovered by adjusting the jopening ratio of access panels.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.13-15
• /
• 2003

This paper presents a design and characteristics analysis of a SRM drive for EPS application. A rack mounted EFS system is considered in this paper. A conventional driving room space and mechanical structure are suggested in design stage. In the restricted design conditions, motor parameters are determined for sufficient torque and speed. For the smooth torque generation and simple circuit of power system, 12/8 motor drive is considered. With FEM and magnetic circuit analysis designed motor is simulated to meet the requirement of specifications. Effectiveness of the suggested SRM drive for EPS application is verified by the manufactured prototype motor drive tests.

• Korean Institute of Interior Design Journal
• /
• no.17
• /
• pp.223-233
• /
• 1998

We intend to illustrate how contemporary architects have conceptualized spaces with words. Language practice is so much important work for the contemporary architects as designing realistic building (material practice) As this point of view we need to interest in theses of architects which contains their unique ideas an characters. The purpose of this study is for understanding how contemporary japanese architects embody through special conception when day design the mixed wooden construction and for looking for the possibility of the development of it. As a result the mixed wooden construction candy understood as an expression form how an architects things about relationship between parts and parts, parts and the whole and the character of materials that consist it and such relationship is determined by the requirement of space.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.2
• /
• pp.162-170
• /
• 2002

Detecting straight lines in an image is frequently required for various machine vision applications such as restoring CAD drawings from scanned images and object recognition. The standard Hough transform has been dominantly used to that purpose. However, massive storage requirement and low precision in estimating line parameters due to the quantization of parameter space are the major drawbacks of the Hough transform technique. In this paper, to overcome the drawbacks, an iterative algorithm based on a self-organizing map is presented. The self-organizing map can be adaptively learned such that image points are clustered by prominent lines. Through the procedure of the algorithm, a set of lines are sequentially detected one at a time. The algorithm can produce highly precised estimates of line parameters using very small amount of storage memory. Computational results for synthetically generated images are given. The promise of the algorithm is also demonstrated with its application to two natural images of inserts.

• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.15-18
• /
• 2001

This paper describes a control scheme for direct torque and flux control of induction machines. The proposed predictive flux control scheme has directly calculated the reference voltage space vector based on flux errors in order to control the torque and flux. This proposed control scheme has not the requirement of a separate current regulator and proportional-integral (PI) control of the flux, torque, and/or current error, thereby improving transient performance and also has the advantage of less torque ripple in steady state with a fixed switching period. The effect of proposed method has been proven by simulations and experiments.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.32 no.2
• /
• pp.1-15
• /
• 2007

This paper proposes a method for determining the number of storage rooms and designing the storage layout in warehouses for pyramid type stacks whose example are slacks for steel coils, paper rolls, and drums for oils. Formulas are derived for estimating the expected values and the variances of various handling times by cranes. From the derived formulas, the expected queuing time of road trucks is estimated. Base on the derived formulas, this study derives the cost function for determining the optimal numbers of rows, bays, and tiers of stacks and sizing cranes under the condition that the requirement for storage space is satisfied. Results of numerical analysis are provided.

• Journal of Biomedical Engineering Research
• /
• v.14 no.1
• /
• pp.9-16
• /
• 1993

For efficient storage and transmission of medical images, the requirement of image com pression is increasing. Because differences between reconstructed images and original images are related with errors In the diagnosis, lossless compression is generally preferred in mod- ical images. in Run Length Coding which is one of the lossless compression method, we have applied modified scanning direction based on the Hilbert curve, which is a kind of space fill ins curve. We have substituted the traditional raster scanning by Hilbert curve direction scanning. Using this method, we have studied enhancement of compression efficiency for medical images.

• Korean Institute of Interior Design Journal
• /
• no.3
• /
• pp.18-25
• /
• 1994

Interior design is an inerdisciplinary field that is in the early stages of theory development, it is necessary to build theoretical frame work for the research. The purpose of this study is to present interior design and guidelines in a three generation family apartment for the elderly, and to develop a theoretical framework on the basis of the human ecosystem approach for analysis of relations between elderly and environment. Analysis and investigations are done by literature review about residential environmental characteristics of the elderly based on the findings of the conceptual analysis. Environmenta elements of interor design related to elderly in a three generation family apartment are as follow ; First, Natural environmental element is orientation, site, temperature, local weather. Second, human behavioral element is privacy , interior design requirement based on physical and psychological effect, housing policy, behavior. Third, Human constructed environmental element is size of apartment space, interior design component, human dimension, aesthetic condition.

• Smart Structures and Systems
• /
• v.13 no.3
• /
• pp.435-451
• /
• 2014

In this paper, we investigate the vibration control of multimodal structures and present an efficient control law that requires less energy supply than active strategies. This strategy is called modal global semi-active control and is designed to work as effectively as the active control and consume less power which represents its major limitation. The proposed law is based on an energetic management of the optimal law such that the controller follows this latter only if there is sufficient energy which will be extracted directly from the system vibrations itself. The control algorithm is presented and validated for a cantilever beam structure subjected to external perturbations. Comparisons between the proposed law performances and those obtained by independent modal space control (IMSC) and semi-active control schemes are offered.