• 한국지구과학회지
• /
• 제39권6호
• /
• pp.519-532
• /
• 2018

우리는 오리온 분자운 복합체의 북부 필라멘트(이하 NF)에 대하여 $^{12}CO$ (J=1-0) 분자선의 자료를 이용하여 은하 평면이 분자의 운동과 운동학에 미치는 영향을 연구하였다. 6 m 서울대학교 전파망원경(Seoul Radio Astronomy Observatory, SRAO)을 이용하여 2arcmin 공간분해능으로 은하면으로부터 먼 순서로 NF1, NF2, NF3 세 곳을 총 270시간 동안 관측된 자료를 사용하였다. 은하면과 OMC NF는 $^{12}CO$ (J=2-1) 경우 3% 밀도에서, 티끌의 경우 9% 밝기 수준에서 자기장을 따라 서로 연결되어 있었다. $^{12}CO$ (J=1-0), $^{12}CO$ (J=2-1), 성간 티끌 관측결과를 비교해본 결과, 세 경우 모두 NF3에서는 고루 분포했지만, NF1과 NF2에서는 비교적 밀도가 높은 특정 영역에서만 함께 나타났다. NF는 단일 구조를 보였으며, NF1에서는 부분 수축 운동을, NF2에서는 하단에서 회전 운동이 나타났고, NF3에서는 유일하게 명확히 자기장에 연관된 나선형 회전이 보였다. 위치-속도 분석 결과, $^{12}CO$ (J=1-0)를 비롯한 물질들은 NF2와 NF3을 따라 은하면을 향하여 흐를 가능성이 있음을 확인할 수 있었다. 은하면을 향하여 물질이 흐르는 명백한 원인을 이번 연구결과에서 볼 수 없었지만 추후의 더 정교한 관측결과가 NF1과 NF2 상단부의 회전 운동을 확인 할 수 있겠다.

• 한국강구조학회 논문집
• /
• 제16권6호통권73호
• /
• pp.759-768
• /
• 2004

본 연구에서는 원형 강관을 수직 브레이스로 연결한 아치 리브의 면내 좌굴강도 및 극한강도를 평가하기 위한 매개변수 해석 연구를 수행하였다. 브레이스트 아치 리브의 탄소성 거동은 하중의 재하 상태와 아치 곡률뿐만 아니라 일반 단일 아치 리브와 달리 강관리브와 브레이스 부재의 휨강성비, 브레이스의 배치 간격, 강관 리브의 배치간격 등에 영향을 받게 된다. 이러한 영향을 분석하기 위해 본 해석에서는 라이즈비, 리브와 브레이스의 단면2차모멘트비, 수직브레이스의 간격비, 지간 대비 상 하 리브의 간격비, 초기 제작오차 및 세장비 등을 매개변수로 하고 하중의 재하 상태는 등분포 고정하중에 대한 활하중의 비를 고려하였다. 이러한 매개변수에 대한 해석 결과로부터 브레이스트 아치 리브의 적정 형상을 제안하였다. 또한, 브레이스트 아치 리브의 극한강도 평가를 위한 대형 구조 실험을 수행하였으며, 실험 결과는 해석에 의한 결과와 비교적 일치하였다.

• 한국건축시공학회지
• /
• 제1권2호
• /
• pp.185-190
• /
• 2001

The purpose of this study is the development of practical Dry floor tile unit method that settle the defect of a wet method and designed for resin mat. With use of PE resin which is confirmed the basic property, it is developed that resin mat, joint-sealing compound with fixed form and space management to Dry floor tile unit method. The result of this study is below. 1) To acquire above the 4kgf/$\textrm{cm}^2$ - construction specification criterion, the bonding space that between resin mat and tile has to occupy the 50% of resin mat module space(10,000$\textrm{cm}^2$). 2) Criteria of bonding part plane is below. simpleness of metal form. productivity, uniform quality after injection molding cooling, easy cutting for remain space management, adhesive property, construction ability, transformation of a severed piece under pressure and so on. 3) To get the shape that could protect the interfacial breakdown, it is designed that resin mat and tile are unified after the bond input. 4) Adapted joint-sealing compound is the material of urethane kinds wedge form. Resin mat has the water passageway that could drain the water. 5) To manage the severed piece of tile, the resin mat is likely to divide the half and the quarter and the plastic drainage is developed in the severed piece.

• 교육시설 논문지
• /
• 제19권2호
• /
• pp.3-12
• /
• 2012

This study is carried out to analyze transition about educational facilities of elementary schools with the change of policy and to find out a developmental direction for qualitative improvement. An analysis of blueprints is done to 34 elementary schools representing periodic characteristics after the 1960's. As a result, various cases were shown in arrangement type, unit space, block planning and plane planning of the schools after a abolition of law about the standardization of educational facilities on 1997, however, they were showing a tendency to simplify after the introduction of BTL on 2005. Spatial composition factors were very various in the schools planned from the middle of 1990's to the early of 2000's. Meanwhile, nearly fifty percent of occupying ratio about learning space in the schools of standard type was gradually decreased by modernization planning on 1990's. However, it was increased a little again after the BTL. In case of living area, the occupying ratio was comparatively high in the schools having characteristics of 1990's and it also tends to increase after the introduction of BTL.

• 한국주거학회논문집
• /
• 제27권1호
• /
• pp.13-20
• /
• 2016

The paper takes the rural housings of the Chaoxian nationality of Ham-kyeongdo in the three provinces in Northeast China as research object, to discuss the spatial form andthe characteristic of the change in the housing. The research result shows that the dwellings' plane forms in the Tumen River, the coast of Yalu River and the Sino Russian border are mainly traditional "Jeong-ji central type (J)", while in Heilongjiang are mainly "Jeong-ji and corridor central type (J-C)". In the evolution of living space and behavior patterns, there appears sliding door and partition between Jeongjibang and kitchen in the former, and Badang space in the front of the Kang and the behavior pattern remains its original seat-type lifestyle mainly. While there forms Dikang space and living space in the process of different cultures blend and modernization in the later and appears some upright-type behavior patterns. There is distinct characteristic in regional changes in both.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2011년도 한국우주과학회보 제20권1호
• /
• pp.28.3-28.3
• /
• 2011

Halo coronal mass ejections (HCMEs) are mainly responsible for the most severe geomagnetic storms. To minimize the projection effect of the HCMEs observed by coronagraphs, several cone models have been suggested. These models allow us to determine the geometrical and kinematic parameters of HCMEs : radial speed, source location, angular width, and the angle between the central axis of the cone and the plane of the sky. In this study, we compare these parameters form two representative cone models (the ice-cream cone model and the asymmetric cone model) using well-observed HCMEs from 2001 to 2002. And we obtain the root mean square error (rms error) between observed projection speeds and calculated projection speeds for both cone models. It is found that the average rms speed error (89 km/s) of the asymmetric cone model is a little smaller than that (107 km/s) of the ice-cream cone models, implying that the radial speeds from both models are reasonably estimated. We also find that the radial speeds obtained from two models are similar to each other with the correlation coefficient of about 0.8.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권2호
• /
• pp.250-255
• /
• 2008

Springs are widely utilized in machine element. To find out stiffness of frustum-shaped coil spring, the space beam theory using the finite element method is adopted in this paper. In three dimensional space, a space frame element is a straight bar of uniform cross section which is capable of resisting axial forces, bending moments about two principal axes in the plane of its cross section and twisting moment about its centroidal axis. The corresponding displacement degrees of freedom are twelve. To find out load vector of coil spring subjected to distributed compression. principle of virtual work is adapted. And this theory was programming using MATLAB software. To compare FEM using MATLAB software was applied MSC. Nastran software. The geometry model for MSC. Patran was produced by 3-D design modeling software. Finite element model was produced by MSC. Patran. Finite element was applied tetra (CTETRA) having 10 node. The analysis results of the MATLAB and MSC. Nastran are fairly well agreed with those of various experiments. Using MATLAB program proposed in this paper and MSC. Nastran, spring constants and stresses can be predicted by input of few factors.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2007년도 춘계학술대회 논문집
• /
• pp.222-226
• /
• 2007

Buildings form interior space when part of an external environment is limited by a physical surface. And, the interior space forms an appearance of building when space-defining elements, such as floor, wall, and roof. An appearance or a form of building has a lot of meanings depending on the physical and psychological conditions, as well as symbolism. Especially, the prevailing meaning of form in the modern age was, "Form follows function," was quite different from the meaning of form in the architectural era of Louis I. Kahn, who asserted "Form always supercedes function," when functional modernism was still existed even after some 50 years later. Existing studies on Louis I. Kahn usually analyzed his architectural terminology and philosophical concepts of Centrality, Light, Order, Form, and Design; or they were focused on an overall plane and the principle of composition. The purposes of this study are: (1) to investigate how the formal composition characteristics of building are expressed on skylights; and (2) to demonstrate that the formal composition characteristics of skylights plays an important role in constructing a whole structure of building in relation with other architectural elements.

• 한국정보통신학회논문지
• /
• 제9권2호
• /
• pp.415-421
• /
• 2005

어레이 소자의 방사 또는 수신 특성은 소자 상호결합 효과 때문에 고립된 소자의 특성과 달라지게 되며, 따라서 어레이 성능은 고립된 소자를 가정하여 설계할 경우의 성능과 다르게 된다. 접지판 위에 위치한 삼각형 격자 구조를 가진 직사각형 다이폴 어레이에 미치는 상호 결합의 영향을 소자패턴을 고려하여 논의하였다. 소자 이득 함수를 이용하여 소자가 균일하게 분포되거나 소자간격이 체감된 어레이에서 부엽(sidelobe)에 미치는 소자 상호결합 효과의 영향을 점검하였다. 상호결합 효과가 존재할 때, 소자간격이 체감된 어레이에서의 부엽의 성능이 소자간격이 균일하게 분포된 어레이와 비교하여 향상되는 것을 보여주었다. 컴퓨터 시뮬레이션을 제시하였다.

• 천문학회보
• /
• 제42권1호
• /
• pp.56.4-57
• /
• 2017

The Schwarzschild-Chang off-axis telescope is a "linear astigmatism-free" confocal system. The telescope comprises two pieces of aluminum-alloy freeform mirrors that are fabricated with diamond turning machine (DTM) process. We designed optomechanical structures where optical components in the telescope system can be adjustable on a linear stage. Optomechanical deformation caused by the weight of system itself and its temperature variation is analyzed by the finite element analysis (FEA). The results show that the deformation is estimated in the tolerance range. For the optic-axis alignment of telescope system, three-point alignment (TPA) method is chosen. The TPA method uses three parallel lasers and a plane mirror. Point source images were taken from collimated light and field observation. The performance of optical system was tested by point spread function and aberration measurement of the point sources.