• 천문학회보
• /
• 제46권2호
• /
• pp.65.2-66
• /
• 2021

Observational studies of supernova (SN) feedback are limited. In our galaxy, most supernova remnants (SNRs) are located in the Galactic plane, so there is contamination from foreground/background sources. SNRs located in other galaxies are too far, so we cannot study them in detail. The Large Magellanic Cloud (LMC) is a unique place to study the SN feedback due to their proximity, which makes possible to study the structure of individual SNRs in some detail together with their environment. Recently, we carried out a systematic study of 13 LMC SNRs using [P II] (1.189 ㎛) and [Fe II] (1.257 ㎛) narrowband imaging with SIRIUS/IRSF, four SNRs (SN 1987A, N158A, N157B and N206), show [P II]/[Fe II] ratio much higher than the cosmic abundance. While the high ratio of SN 1987A could be due to enhanced abundance in SN ejecta, we do not have a clear explanation for the other cases. We investigate the [P II] knots found in SNRs N206, N157B and N158A, using optical spectra obtained last November with GMOS-S mounted on Gemini-South telescope. We detected several emission lines (e.g., H I, [O I], He I, [O III], [N II] and [S II]) that are present in all three SNRs, among other lines that are only found in some of them (e.g., [Ne III], [Fe III] and [Fe II]). Various line ratios are measured from the three SNRs, which indicate that the ratios of N157B tend to differ from those of other two SNRs. We will use the abundances of He and N (from the detection of [N II] and He I emission lines), together with velocity measurements to tell whether the origin of the [P II] knots are SN ejecta or CSM/ISM. For this purpose we have built a family of radiative shock with self-consistent pre-ionization using MAPPINGS 5.1.18, with shock velocities in the range of 100 to 475 km/s. We will compare the observed and modeled line fluxes for different depletion factors.

• Geomechanics and Engineering
• /
• 제34권5호
• /
• pp.491-505
• /
• 2023

The practical usage of underground space and demand for vehicular tunnels necessitate the construction of non-circular wide rectangular tunnels. However, constructing large tunnels in soft clayey soil conditions with no ground improvement can lead to excessive ground deformations and collapse. In recent years, in situ ground improvement techniques such as jet grouting and deep cement mixing are often utilized to perform cement-stabilisation around the tunnel boundary to prevent large deformations and failure. This paper discusses the stability characteristics and failure behaviour of a wide rectangular tunnel in cement-treated soft clays. First, the plane strain finite element model is developed and validated with the results of centrifuge model tests available in the past literature. The critical tunnel support pressures computed from the numerical study are found to be in good agreement with those of centrifuge model tests. The influence of varying strength and thickness of improved soil surround, and cover depth are studied on the stability and failure modes of a rectangular tunnel. It is observed that the failure behaviour of the tunnel in improved soil surround depends on the ratio of the strength of improved soil surround to the strength of surrounding soil, i.e., q_ui/q_us, rather than just q_ui. For low q_ui/q_us ratios,the stability increases with the cover; however, for the high strength improved soil surrounds with q_ui >> q_us, the stability decreases with the cover. The failure chart, modified stability equation, and stability chart are also proposed as preliminary design guidelines for constructing rectangular tunnels in the improved soil surrounded by soft clays.

• 분석과학
• /
• 제21권6호
• /
• pp.562-568
• /
• 2008

A novel two-dimensional cadmium(II)-nickel(II) bimetallic host clathrate, $[Cd{NH_2CH_2CH_2OH}_2Ni(CN)_4]{\cdot}3C_6H_5NH_2{\cdot}H_2O$, 1, has been synthesized and structurally characterized by X-ray single crystallographic method. The clathrate 1 crystallizes in the monoclinic system, space group $P2_1/c$ with a = 14.370(3), b = 7.728(1), c = 28.172(4) ${\AA}$, ${\beta}=97.58(1)^{\circ}$, V = 3101.1(9) ${\AA}^3$, Z = 4. The host framework of the clathrate 1 is built of the cyanide bridges between octahedral Cd(II) atom and square planar Ni(II) atom. The octahedral Cd atoms ligated by two 2-aminoethanol molecules and four cyanide ligands bridged with square planar Ni atoms. The Ni atoms bridges to four Cd atoms via cyanides is made up of puckered quadrangles of composition $\{CdNi(CN)_2\}_2$, all edges are shared. This cyanide bridges form an infinite two-dimensional host networks stacking along b axis. 2-Aminoethanol ligands bond to Cd atom through N atom as a monodentate ligand in the axial position and four cyanides take an equatorial plane with all in trans-configurations. The aniline guest molecules and water molecules are located in between the host layer sheets, respectively.

• Structural Engineering and Mechanics
• /
• 제87권2호
• /
• pp.137-149
• /
• 2023

In this study, to explore the working performance of the CFST split spherical node wind power tower, two groups of CFST split spherical joint plane towers with different web wall thicknesses and a set of space systems were analyzed. The tower was subjected to a low-cycle repeated load test, and the hysteresis and skeleton curves were analyzed. ABAQUS finite element simulation was used for verification and comparison, and on this basis parameter expansion analysis was carried out. The results show that the failure mode of the wind power tower was divided into weld tear damage between belly bar, high strength bolt thread damage and belly rod flexion damage. In addition, increasing the wall thickness of the web member could render the hysteresis curve fuller. Finally, the bearing capacity of the separated spherical node wind power tower was high, but its plastic deformation ability was poor. The ultimate bearing capacity and ductility coefficient of the simulated specimens are positively correlated with web diameter ratio and web column stiffness ratio. When the diameter ratio of the web member was greater than 0.13, or the stiffness ratio γ of the web member to the column was greater than 0.022, the increase of the ultimate bearing capacity and ductility coefficient decreased significantly. In order to maximize the overall mechanical performance of the tower and improve its economy, it was suggested that the diameter ratio of the ventral rod be 0.11-0.13, while the stiffness ratio γ should be 0.02-0.022.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.775-784
• /
• 2023

Drone images are being used more and more actively in the fields of surveying and spatial information, and are rapidly replacing existing aerial and satellite images. The technology of quickly acquiring real-time data at low cost and processing it is now being applied to actual industries beyond research. However, there are also problems encountered as this progresses. When high-resolution spatial information is acquired using a general 2D flight plan for a terrain with sever undulations, problems arise due to the difference in resolution of the data. In particular, when a low-altitude high-resolution image is taken using a drone in a mountainous or steep terrain, there may be a problem in image matching due to a resolution difference caused by terrain undulations. This problem occurs because a drone acquires data while flying on a 2D plane at a fixed altitude, just like conventional aerial photography. In order to acquire high-quality 3D data using a drone, the scale difference for the shooting distance should be considered. In addition, in order to obtain facade images of large structures, it is necessary to take images in 3D space. In this study, in order to improve the disadvantages of the 2D flight method, a 3D flight plan was established for the study area, and it was confirmed that high-quality 3D spatial information could be obtained in this way.

• Korean Journal of Radiology
• /
• 제22권5호
• /
• pp.759-769
• /
• 2021

Objective: To evaluate the application of laplacian-regularized mean apparent propagator (MAPL)-MRI to brain glioma-induced corticospinal tract (CST) injury. Materials and Methods: This study included 20 patients with glioma adjacent to the CST pathway who had undergone structural and diffusion MRI. The entire CSTs of the affected and healthy sides were reconstructed, and the peritumoral CSTs were manually segmented. The morphological characteristics of the CST (track number, average length, volume, displacement of the affected CST) were examined and the diffusion parameter values, including fractional anisotropy (FA), mean diffusivity (MD), axial diffusivity (AD), radial diffusivity (RD), mean squared displacement (MSD), q-space inverse variance (QIV), return-to-origin probability (RTOP), return-to-axis probabilities (RTAP), and return-to-plane probabilities (RTPP) along the entire and peritumoral CSTs, were calculated. The entire and peritumoral CST characteristics of the affected and healthy sides as well as those relative CST characteristics of the patients with motor weakness and normal motor function were compared. Results: The track number, volume, MD, RD, MSD, QIV, RTAP, RTOP, and RTPP of the entire and peritumoral CSTs changed significantly for the affected side, whereas the AD and FA changed significantly only in the peritumoral CST (p < 0.05). In patients with motor weakness, the relative MSD of the entire CST, QIV of the entire and peritumoral CSTs, and the AD, MD, RD of the peritumoral CST were significantly higher, whereas the RTPP of the entire and peritumoral CSTs and the RTOP of the peritumoral CST were significantly lower than those in patients with normal motor function (p < 0.05 for all). In contrast, no significant changes were found in the CST morphological characteristics, FA, or RTAP (p > 0.05 for all). Conclusion: MAPL-MRI is an effective approach for evaluating microstructural changes after CST injury. Its sensitivity may improve when using the peritumoral CST features.

• Imaging Science in Dentistry
• /
• 제54권2호
• /
• pp.181-190
• /
• 2024

Purpose: This study compared sequential changes in skeletal stability and the pharyngeal airway following mandibular setback surgery involving fixation with either a titanium or a bioabsorbable plate and screws. Materials and Methods: Twenty-eight patients with mandibular prognathism undergoing bilateral sagittal split osteotomy by titanium or bioabsorbable fixation were randomly selected in this study. Lateral cephalometric analysis was conducted preoperatively and at 1 week, 3-6 months, and 1 year postoperatively. Mandibular stability was assessed by examining horizontal (BX), vertical (BY), and angular measurements including the sella-nasion to point B angle and the mandibular plane angle (MPA). Pharyngeal airway changes were evaluated by analyzing the nasopharynx, uvula-pharynx, tongue-pharynx, and epiglottis-pharynx (EOP) distances. Mandibular and pharyngeal airway changes were examined sequentially. To evaluate postoperative changes within groups, the Wilcoxon signed-rank test was employed, while the Mann-Whitney U test was used for between-group comparisons. Immediate postoperative changes in the airway were correlated to surgical movements using the Spearman rank test. Results: Significant changes in the MPA were observed in both the titanium and bioabsorbable groups at 3-6 months post-surgery, with significance persisting in the bioabsorbable group at 1 year postoperatively (2.29°±2.28°; P<0.05). The bioabsorbable group also exhibited significant EOP changes (-1.21±1.54 mm; P<0.05) at 3-6 months, which gradually returned to non-significant levels by 1 year postoperatively. Conclusion: Osteofixation using bioabsorbable plates and screws is comparable to that achieved with titanium in long-term skeletal stability and maintaining pharyngeal airway dimensions. However, a tendency for relapse exists, especially regarding the MPA.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제21권2호
• /
• pp.55-65
• /
• 2015

Purpose: Korea is increasing in the demand for medical services due to rapid economic growth and population aging in modern society. Thus, the importance has been emphasized for the health promotion in the community and the publicity and substantiality of public health centers. However, the environment is insufficient, compared to required functions and developed services as a urban public health center. The purpose of this study is to analysis the plane type and area composition of public health centers in Busan and to identify the property of their spatial configuration Methods: Eight public health centers in Busan, were classified, which had been selected as a medical tourism city. Subsequently, space requirements were analyzed, facilities were typed, vertical, horizontal spaces were reviewed, and area ratios by business function were calculated. Results: A review of the property of spatial configuration and an analysis of the area ratio revealed the three findings. 1)The horizontal analysis found various types: a single type, a multi-type, a radial type, and a circular type, 2)The vertical analysis showed that since a care function (general practice), and a task function (maternal and child health) were concentrated in lower level spaces, the lobby and core were closed located for providing quick medical services. 3)The analysis of the area ratio in public health centers in terms of their function indicated that each public health center' programs had the greatest influence on the area. Implications: This study attempted to present spatial structural problems and improvements for city public health center by identifying their state and classify their functions and types and by calculating the ratio of their area configuration according to the spatial composition. It was thus aimed to presenting implications in establish public functions and roles by activating business through in connection with the number of municipalities in many ways, such as regional health. medical welfare, etc. to improve the health of local residents, and by providing differentiated programs in accordance with local characteristics.

• 복식
• /
• 제58권3호
• /
• pp.63-78
• /
• 2008

Since 1960, minimalism has been one of the fashion phenomenon and turned out in many different ways. After postmodernism which contains negotiation and pluralism, appeared in 1980, there was a new wave of post minimalism that inherited 1960's minimalism. Minimal style which come out of 60's fashion, is marked by simplicity, minimal expression, and monochrome color, and it shows up simple style with no decoration. It opened up a young fashion period, and we saw minimal style in sports wear which utilized simplicity and function with spread of sports in the 70's. And also since 1980, Post-Modern widely influenced the idea about modern culture as well as complicated clothes getting rid of fixed concept, seeking to break the boundary between culture and life which were seek in fashion and personality as well as various characteristic, Accordingly in different ages, The style and image were borrowed from different culture and natural environment mixing the image, cultural phenomena like these appearing in complexity and expression, variety and possibility of new vision was expanded. Since 1980, Fashion has become more gradually diversity, high classed, required of each individuality. The phenomenon of fashion reappearance which was influenced by minimalism is continued to 2000. The Oriental style fashion is still attracted, so The new term "Ethic Minimalism" has appeared along with the trends which is put together. Therefore the purpose of this study is to search the concept and the characteristics of ethnic minimalism, to consider the relationship between minimalism and ethnic minimalism, and reveal the characteristic of ethnic minimalism happened to modern fashion. The study method went through literature research and practice research. The range of this study is oriental fashion spanning of from 1960 to current day. Photo records from this period show well the spirit of the oriental and the personality of minimalism. The oriental representative designer and western representative designer are centered Consequently, The formative characteristics of ethnic minimalism are simple, pure, unbalanced free style and representing the phenomena of compromise, blending oriental and western fashion. Structually, Elements of space and plane are emphasized, colors are restricted, and materials are composed mainly of natural fiber. So, minimalism based on simplicity combined with a structure of oriental spiritual depth and space, It could be called ethnic minimalism as a rational fashion.

• 한국측량학회지
• /
• 제30권1호
• /
• pp.21-30
• /
• 2012

위성 카메라의 두 밴드가 다른 관측 각(Look angle)으로 촬영 시, 두 밴드간의 정합이 요구된다. 밴드 정합(Band registration)은 플랫폼의 다이나믹스(Dynamics)와 시차효과로 인하여 상수매개변수(constant parameter)로 수학적인 모델을 수립하여 정합(registration)을 수행하기 어렵다. 시차효과는 지표면 표고에 의해 야기되는 현상으로 이는 두 밴드간 정합 특성이 지표면의 표고의 함수로 주어진다. 두 밴드간 정합이 성공적으로 이뤄지기 위하여 시차효과를 보상하는 표고시차보상기법이 요구된다. 이러한 표고시차보상은 특히 고해상도 영상정합에서 중요하다. 표고시차보상기법은 하나의 밴드를 다른 관측 각을 가지는 다수의 CCD라인으로 구성한 경우에도 적용이 가능하다. 한 밴드에서 촬영된CCD라인 영상들은 연결된CCD라인마다 다른 관측 각을 가짐으로CCD라인간 표고시차가 발생하여 CCD라인간 지상거리 차가 표고에 따라 증가되는 왜곡 현상이 나타나기 때문이다. 이를 보상하기 위해 기준밴드 또는 기준 CCD라인과 대상밴드 또는 대상 CCD라인간 영상과 지상간의 관계를 다항식을 사용하여 수학적으로 모델 하는RFM을 사용하였다. 실험결과, 표고시차가 존재하는 영상에 대해서도 제안된 기법으로 밴드 정합이 성공적으로 수행되는 것을 확인하였다.