• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.405-415
• /
• 2016

This paper presents a model predictive control for shunt active power filters in synchronous reference frame using space vector pulse-width modulation (SVPWM). The three phase load currents are transformed into synchronous rotating reference frame in order to reduce the order of the control system. The proposed current controller calculates reference current command for harmonic current components in synchronous frame. The fundamental load current components are transformed into dc components revealing only the harmonics. The predictive current controller will add robustness and fast compensation to generate commands to the SVPWM which minimizes switching frequency while maintaining fast harmonic compensation. By using the model predictive control, the optimal switching state to be applied to the next sampling time is selected. The filter current contains only the harmonic components, which are the reference compensating currents. In this method the supply current will be equal to the fundamental component of load current and a part of the current at fundamental frequency for losses of the inverter. Mathematical analysis and the feasibility of the suggested approach are verified through simulation results under steady state and transient conditions for non-linear load. The effectiveness of the proposed controller is confirmed through experimental validation.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.190-201
• /
• 2015

This paper uses the switching function approach to present a simple state model of the Vienna-type rectifier. The approach introduces the relationship between the DC-link neutral point voltage and the AC side phase currents. A novel direct power control (DPC) strategy, which is based on the sliding mode control (SMC) for Vienna I rectifiers, is developed using the proposed power model in the stationary ${\alpha}-{\beta}$ reference frames. The SMC-based DPC methodology directly regulates instantaneous active and reactive powers without transforming to a synchronous rotating coordinate reference frame or a tracking phase angle of grid voltage. Moreover, the required rectifier control voltages are directly calculated by utilizing the non-linear SMC scheme. Theoretically, active and reactive power flows are controlled without ripple or cross coupling. Furthermore, the fixed-switching frequency is obtained by employing the simplified space vector modulation (SVM). SVM solves the complicated designing problem of the AC harmonic filter. The simplified SVM is based on the simplification of the space vector diagram of a three-level converter into that of a two-level converter. The dwelling time calculation and switching sequence selection are easily implemented like those in the conventional two-level rectifier. Replacing the current control loops with power control loops simplifies the system design and enhances the transient performance. The simulation models in MATLAB/Simulink and the digital signal processor-controlled 1.5 kW Vienna-type rectifier are used to verify the fast responses and robustness of the proposed control scheme.

• 제어로봇시스템학회논문지
• /
• 제20권9호
• /
• pp.900-907
• /
• 2014

This paper proposes a MPC (Model Predictive Control) method for the torque and flux controls of induction motor. The proposed MPC method selects the optimized voltage vector for the matrix converter control using the predictive modeling equation of the induction motor and cost function. Hence, the reference voltage vector that minimizes the cost function of the torque and flux error within the control period is selected and applied to the actual system. As a result, it is possible to perform the torque and flux control of induction motor using only the MPC controller without a PI (Proportional-Integral) or hysteresis controller. Even though the proposed control algorithm is more complicated and has lots of computations compared with the conventional MPC, it can perform torque ripple reduction by synthesizing voltage vectors of various magnitude. This feature provides the reduction of amount of calculations and the improvement of the control performance through the adjustment of the number of the unit vectors n. The proposed control method is validated through the PSIM simulation.

• 전기학회논문지P
• /
• 제63권4호
• /
• pp.219-225
• /
• 2014

The purpose of this paper is to control of the low-speed, high-precision PMSM 2-axes pitch/turning. In this paper, apply the PAM-PWM inverter for it. However, The PAM-PWM inverter, control algorithms and hardware is complex. But it is possible to improve the performance in the low-speed operation can reduce the effect of the PWM ripple and Dead Time of inverter by applying suitable DC-bus voltage control. The direct driver PMSM(Permanent Magnet Synchronous Motor) configured to vector control part, PAM control part and the other controller. The vector control part includes PI current, speed control, additional space vector modulation. PAM control part has to have PI voltage controller and P current controller for DC-bus voltage control. Besides, the motor position estimator, the speed estimator and the counter electromotive force and Dead Time Compensation are added. With this arrangement, PMSM was driven with a low pole pitch/turning by performing the current control to the current command or torque command is the paper. As a result, it was possible to minimize the disturbance component that appears in the drive in proportion to the DC voltage magnitude. The use of a hydraulic drive method for a two-axis bubble column is a typical tank. When using the PWM PAM inverter driver is in the turret can be driven by high-precision, low vibration, low noise compared to the hydraulic drive may contribute to the computerization of the turret.

• 전자공학회논문지CI
• /
• 제45권5호
• /
• pp.102-109
• /
• 2008

본 논문은 다중경로 페이딩 채널 조건에서 사전 정보없이 입사하는 디지털 신호 10종의 변조형태를 고정확도로 인식할 수 있도록 고차 통계량(HOS)과 웨이브릿 변환(WT)에서 선정된 특징(key features)을 이용한 견실한 하이브리드 분류기를 제안하였다. 제안된 분류기는 실제 시나리오를 고려하여 다양한 다중경로 환경(즉, 농촌, 소도시, 도심지역)에서 측정된 채널 데이터를 이용하였다. 실제 측정된 다중경로 페이딩 채널 데이터를 이용하여 Holdout-like 방식으로 총 15개 채널 중 9개 채널은 트레이닝용으로 사용하고, 나머지 6개 채널은 테스트용으로 사용하였다. 제안된 분류기는 다중경로 환경에서 높은 변별력을 유지하는 HOS 특징을 기반으로 구현되었고, AMA(Alphabet Matched Algorithm) 또는 MMA(Multi-modulus Algerian)와 같은 등화기법의 적용없이 분류가 어렵다고 알려진 MQAM신호(M=16, 64, 256)들에 대해서만 WT 특징을 적용하였다. 선정된 특징들을 이용한 변조인식은 입력공간에서 최대 마진을 갖는 하이퍼 공간으로 매핑시킴으로서 분류 능력이 우수하다고 알려진 SVM 메소드를 적용하여 시뮬레이션을 실시하였다. 제안된 분류기의 성능은 트레이닝 채널과 테스트 채널에서 WT 또는 HOS 특징만을 단독으로 사용하는 분류기에 비해 현저한 성능 향상을 보였고, 특히, MQAM 신호의 인식률은 낮은 SNR레벨에서도 거의 완전하게 분류되었다.

• 전기학회논문지
• /
• 제62권3호
• /
• pp.355-364
• /
• 2013

Respect to the input AC voltage and output DC voltage, conventional three-phase PWM rectifier is classified as the voltage type rectifier with boost capability and the current type rectifier voltage with buck capability. Conventional PWM rectifier can not at the same time the boost and buck capability and its bridge is weak in the shoot- through state. These problems can be solved by Z-source PWM rectifier which has all characteristic of voltage and current type PWM rectifier. By shoot-through duty ratio control, the Z-source PWM rectifier can buck and boost at the same time, also, there is no need to consider the dead time. This paper proposes the input AC voltage sensorless control method of a three-phase Z-source PWM rectifier in order to accomplish the unity input power factor and output DC voltage control. The proposed method is estimated the input AC voltage by using input AC current and output DC voltage, hence, the sensor for the input AC voltage detection is no needed. comparison of the estimated and detected input AC voltage, estimated phase angle of the input voltage, the output DC voltage response for reference value, unity power factor, FFT(Fast Fourier Transform) of the estimated voltage and efficiency are verified by PSIM simulation.

• Journal of Electrical Engineering and Technology
• /
• 제4권2호
• /
• pp.219-228
• /
• 2009

The growing application and the numerous qualities of induction motors (1M) in industrial processes that require high security and reliability levels has led to the development of multiple methods for early fault detection. However, various faults can occur, such as stator short-circuits and rotor failures. Traditionally the diagnosis machine is done through a sinusoidal power supply, in the present paper we study experimentally the effects of the rotor failures, such as broken rotor bars in function of the ac supplying, the load and show the impact of the converter from diagnosis of the machine. The technique diagnosis used is based on the spectral analysis of stator currents or stator voltages respectively according to the types of induction motor ac supplying. So, four different ac supplying are considered: ${\odot}$ the IM is directly by the balanced three-phase network voltage source, ${\odot}$ the IM is fed by a sinusoidal current source given the controlled by hysteresis, ${\odot}$ the IM is fed (in open loop) by a scalar control imposing through ratio V/f=constant, ${\odot}$ the IM is controlled through a vector control using space vector pulse width modulation (SVPWM) technique inverter with an outer speed loop.

• 한국정보통신학회논문지
• /
• 제16권5호
• /
• pp.1095-1101
• /
• 2012

본 논문은 DSP 제어기와 IGBT 구동기를 이용하는 조립과 공급의 자동처리를 위한 BLDC 서보 모터 제어시스템 설계를 제안한다. 조립, 공급 자동처리 시스템은 다양한 동작을 위해 서보모터의 토크, 속도, 위치 제어를 필요로한다. 본 논문은 이러한 서보제어를 벡터제어와 공간벡터 PWM 기법을 이용하여 구현한다. 제어기의 CPU 로서 PWM 파형발생기, A/D 컨버터, SPI 통신 포트 및 많은 입/출력 포트를 갖는 TMS320F240 DSP를 채택하였다. 이 제어시스템은 메인 호스트 PC 가 위로부터의 명령을 전달하고 끝단의 서보제어기의 상태들을 모니터링하는 세 개의 부 DSP시스템을 관리하는 3레벨의 계층적 구조로 이루어져 있다. 각 부 DSP 시스템은 DSP와 IPM을 사용하여 BLDC 서보모터를 제어하는 8개의 BLDC 서보모터제어부를 운영한다. 호스트 시스템과 중간의 DSP는 RS-422을 이용하여 통신하며, 주프로세서와 제어기는 SPI 포트를 이용하여 통신한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1351-1354
• /
• 2002

Wind farm which are composed with wind turbine generators can be a good alternatives to solve environmental problem and solutions to cope with energy crisis for using wind energy. Until now, these wind turbine generators have been being studied on the viewpoint of only active power control for reducing the burden of main grid. In this control scheme, we might demand a reactive power compensator in order to make reparation for the reactive power produced from wind turbine generator itself. Therefore, if the reactive power as well as active power of wind turbine generator were controlled according to the demand of reactive power, the installation of a additional reactive power compensator could be reduced. This paper presents the control method of a active and reactive power for wind turbine generators by means of SVPWM(Space Vector Pulse Width Modulation) inverting method and describes a operational coordination of wind turbine generators. The proposed power control algorithm can simply produce the output power of wind turbine generator needed in wind farm, which can reduce the power of main grid more and exclude a supplementary reactive power compensator. We assumed that wind farm are composed with two kinds of wind turbine generators, AC/DC/AC and induction generator types.

• 조명전기설비학회논문지
• /
• 제23권9호
• /
• pp.124-129
• /
• 2009

최근 자동차 및 자동화 등 많은 첨단 산업분야에서 산업용 모터 정밀 제어를 위한 인버터의 요구가 증가하고 있다. 본 논문에서는 FPGA를 이용하여 단일 제어 유닛으로 여러 개의 모터를 제어할 수 있는 SVPWM 모듈을 설계 제작하여 모터 정밀제어에 응용하고자 한다. 개발된 WVPWM 모듈에는 PWM 발생기뿐만 아니라 위치 및 전류센서 처리 부분과 데프타임 보상기 알고리즘도 함께 구현되었다. 개발 툴은 ALTERA Quartus 8.0을 사용하였으며 시뮬레이션에 의해 동작 특성을 검증하였고 실험을 통해 성능을 검증하였다.