• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.719-722
• /
• 2004

Resins using recycled PET offer the possibility of a lower source cost of materials for making useful polymer concrete products. The purposed of this paper is to form a part of reducing the damage of sulfuric acid, through investigating recycled PET polymer concrete, . immersed at sulfuric acid solution for 84 days. Recycled PET PC is excellent chemical resistance, resulting in the role of unsaturated polyester resin which consists of polymer chain structure accomplishes bond of aggregates and filler strongly. Also, Recycled PET PC, used fly-ash as filler, is stronger resistance of sulfuric acid corrosion than $CaCO_3$, because it is composed of $SiO_2$ and very strong glassy crystal structure. Therefore, Recycled PET PC, used fly-ash as filler, is available under corrosion circumstances like sewer pipe or waste disposal plant.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.8
• /
• pp.501-504
• /
• 2014

This paper was developed and described core-process to implement low on resistance which was the most important characteristics of SJ (super junction) MOSFET. Firstly, using process-simulation, SJ MOSFET optimal structure was set and developed its process flow chart by repeated simulation. Following process flow, gate level process was performed. And source and drain level process was similar to genral planar MOSFET, so the process was the same as the general planar MOSFET. And then to develop deep trench process which was main process of the whole process, after finishing photo mask process, we developed deep trench process. We expected that developed process was necessary to develop SJ MOSFET for automobile semiconductor.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.95-97
• /
• 1995

A superconducting current generator, or a superconducting rectifier(SCR) is used as a current source to energize a superconducting magnets in SMES, MRI. We selected a full-wave SCR among various SCR models and analyzed its operational characteristics by computer simulation. In process of pumping the current, the improvement of performance is dependent on how much bigger the open resistance of the switch is in comparison to load coil impedance when one of two switches become active. Faster transfer can he seen in resistive commutation mode by shortening the time elapsed for the resistance to arrive at certain level from zero state. Although recovery time for the switch has no direct effect on current pumping, optimal switch design is needed to increasing operational frequency.

• The Korean Journal of Mycology
• /
• v.13 no.4
• /
• pp.227-233
• /
• 1985

Studies on the varietal resistance and effects of nutrients for fungal growth were carried out in order to obtain basic materials for breeding resistant variety and control measures of the red pepper anthracnose disease caused by Colletotrichum dematium f. sp. capsicum. Four cultivars such as Kumchang No. 2, Bulamhouse, Pakistan, Hongilpum were resistant among twenty-one pepper cultivars, and five cultivars including Taiwan pepper were moderate. The remaining twelve cultivars including H-038 and Saegochu were susceptible. These susceptible cultivars were mostly belonged to sweet taste cultivars. Glucose was known the best source for fungal growth, and near 3 percent of carbon concentration was the best for mycelial growth of the fungus. Conidial sporulation was rather decreased by adding high concentrations of C-source, whereas fungal dry weight was a positive tendency in proportion to increasing carbon concentrations. N-sources and vitamins were not remarkable as that for carbon, and rather a decreasing trend for mycelial growth by adding N-source. Especially, the lowest of mycelial growth was in the case of Czapek-Dox plus ammonium sulfate. The medium plus vitamins either niacin or thiamine was slightly increased to mycelial growth.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.5 s.149
• /
• pp.550-559
• /
• 2006

A design procedure for a ship with minimum total resistance was developed using a numerical optimization method called SQP(Sequential Quadratic Programming) and a CFD technique based on the Rankine source panel method with the nonlinear free surface boundary conditions. During the whole optimization process the geometry of the hull shape was represented based on the NURBS(Non-uniform rational B-spline) technique and the modification of the hull shape was controlled using the Bell-shaped distribution function to keep the fairness of the hull shape before and after the hull modification. The numerical analysis was carried out using 4000TEU container ship in the towing tank facility installed in the Pusan national university to know the validity of the developed algorithm for this study. As the results of the numerical analysis it proved that the resistance of the optimized hull is conspicuously reduced in comparison with the original hull in a wave-making resistance point of view.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.112.2-112
• /
• 2003

Levels of blister rust infection (from Cronartium ribicola) varied in western white pine(Pinus monticola Dougl.) seedlings grown in two nurseries in northern Idaho. This observation suggested the potential importance of environmental components operating on the blister rust pathosystem. In an experiment designed to test the influence of environmental conditions at two nurseries, seedlings of a single genetic source were unintentionally held in cold storage for 6 months longer at one nursery than at the other. Subsequently, these seedlings, which had been growing under nursery conditions for 7 months or 1 month, were inoculated with blister rust spores on September 9th, 1999. Infection efficiency measured on the seedlings with only 1 month of growth was 70X greater than on the seedlings that had 7 months for their new growth to mature. Results from this nursery test and infection levels of northern Idaho resistant selections in mild climates suggest that expression of genes related to rust resistance in western white pine can be manipulated by regulation of phonology. If so, several new molecular tools may be employed to enhance our understanding of environmental regulation of genes for blister rust resistance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.1
• /
• pp.160-167
• /
• 2010

This paper proposes an adaptive sliding mode observer (SMO), which adds the estimation function of the stator resistance to a new sliding mode observer for the robust sensorless control of permanent magnet synchronous motor (PMSM) with variable parameters. To reduce the chattering problem commonly found in the conventional sliding mode observer where the low-pass filter and additional position compensation of the rotor are used, the sigmoid function is used for the control of a switching function in this research. With the estimation of the stator resistance, the proposed observer can improve the control performance by reducing the estimation error of the motor's speed. Note that the stator resistance is varying with the ambient temperature and becomes an error source for the sensorless control of PMSM. The new sliding mode observer has better efficiency than the conventional adaptive sliding mode observer by reducing the time consuming integral calculations. The stability of the proposed adaptive sliding mode observer is verified by the Lyapunov function in determining the observer gains, and the effectiveness of the observer is demonstrated by simulations and experiments.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.6
• /
• pp.8-13
• /
• 2015

Recently, Illumination industry of LED module has been focused to industry technology for energy conservation of nation. The LED device is excellent to power efficiency due to semiconductor light source element. And the application to the lighting circuit technology can be designed to the sensitive lighting system for human sensitivity control. In this paper, as a process for analyzing the operating temperature of standardized electronic device including LED device has analyzed about fusing character with in designed micro fuse for electronic device protection from the over current. Using the de-rating technique, which is performed to micro fuse fusing test in the range of $-30^{\circ}C{\sim}120^{\circ}C$ thermostatic chamber. To the output data in each temperature zone, it is performed to first-order linear fitting. Additionally, applying the resistance temperature coefficient and statistical data for the reliable analysis has derived to the metal element resistance of micro fuse with temperature change of the thermostatic chamber. As a research result, The changed temperature effect of thermostatic chamber was confirmed regarding fusing time change.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.2
• /
• pp.163-170
• /
• 2015

Recently LED fish-attracting lamps have been more widely used in fisheries as low-cost and high-efficiency fishing gear, and development of long-life high-efficiency lamps is required through the design of LED packages to optimize heat resistance. This study developed an improved LED fish-attracting lamp with excellent heat performance, which was verified using a numerical model. Heat-resistance design factors such as the heat-radiation fin shape, PCB type, and LED chip count were investigated and optimized. Comparison with a commercial 180-W LED fishing lamp showed that the increase in initial temperature was 40% higher than that of the surrounding LED chip because of design errors in contact thermal resistance. The 250-W LED lamp developed in this study has a characteristic with thermal rising in linearly stable according to the heat source. In addition, luminance efficiency was improved by 20-65% by using flow-visualization simulation. A decrease of 45% in total power consumption with a fuel-cost reduction of over 55% can be expected when using these optimized heat release design factors.

• Journal of Environmental Health Sciences
• /
• v.19 no.1
• /
• pp.71-76
• /
• 1993

Nasal carrige of Staphylococcus was studied in relation to its significance as a source of the Staphylococci that caused hospital-acquired infection. Due to the trend of the increasing r esistance of S. aureus to many antimicrobial agents, it is necessary to study the sensitivity to antibiotics of this infectious microorganisms. 50 persons from general hospital and 50 college students were the object of this study. The following results were obtained 3 0 Strains of S. aureus were isolated. The rate of S. aureus nasal carrying were 26% in college students and 34% in hospital personnel. S. aureus which showed resistance to penicillin were 90%, tetracyclin 43%, erythromycin 37% and oxacillin 17%. The number of penicillin resistance of S. aureus were 11 (84%) in college students and 16 (94%) in hospital personnel. The number of strains of penicillin resistant S. aureus which produced 13-1actamase were 9 (82%) in college student and 14 (88%) in hospital personnel. Methicillin-resistant S. aureus (MRSA) which showed resistance to erythromycin and penicillin G were 100%, tetracyline, cephalothin and clindamycin were over 40% respectively, gentamicin 20%, SAM 20% and chloramphenicol 0%.