• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.3
• /
• pp.83-89
• /
• 2010

Scalable routing is one of the key challenges in designing and operating large scale MANETs. Performance of routing protocols proposed so far is only guaranteed under various limitation, i.e., dependent of the number of nodes in the network or needs the location information of destination node. Due to the dependency to the number of nodes in the network, as the number of nodes increases the performance of previous routing protocols degrade dramatically. We propose Cluster Overlay Dynamic Source Routing (CODSR) protocol. We conduct performance analysis by means of computer simulation under various conditions - diameter scaling and density scaling. Developed algorithm outperforms the DSR algorithm, e.g., more than 90% improvement as for the normalized routing load. Operation of CODSR is very simple and we show that the message and time complexity of CODSR is independent of the number of nodes in the network which makes CODSR highly scalable.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.2
• /
• pp.136-141
• /
• 2005

The capability of utilizing a TCA cycle intermediates as the sole carbon source by the multi-vitamin auxotrophic yeast Torulopsis glabrata CCTCC M202019 was demonstrated with plate count method. It is indicated that T. glabrata could grew on a medium with one of the TCA cycle intermediates as the sole carbon source, but more colonies were observed when glucose, acetate and one of the TCA cycle intermediates coexisted in the medium. Among the intermediates of the TCA cycle examined in this study, cell growth was improved by supplementing oxaloacetate. Further investigation showed that the presence of acetate was necessary when oxaloacetate was supplemented. By supplementing with 10 g/L of oxaloacetate in pyruvate batch fermentation, dry cell weight increased from 11.8 g/L to 13.6 g/L, and pyruvate productivity was enhanced from $0.96\;gL^{-1}h^{-1}\;to\;1.19 gL^{-1}h^{-1}$ after cultivation of 56 h. The yield of pyruvate to glucose was also improved from 0.63 g/g to 0.66 g/g. These results indicate that under vitamins limitation, the productivity and yield of pyruvate could be enhanced via an increase of cell growth by the supplementation of oxaloacetate.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.7
• /
• pp.313-318
• /
• 2016

To utilize sensory data, it is necessary to design architecture for processing and handling data generated from sensors in an IoT environment. Especially in the IoT environment, a thing connects to the Internet and efficiently enables to communicate a device with diverse sensors. But Hadoop and Twister based on MapReduce are good at handling data in a batch processing. It has a limitation for processing stream data from a sensor in a motion. Traditional streaming data processing has been mainly applied a MoM based message queuing system. It has maintainability and scalability problems because a programmer should consider details related with complex messaging flow. In this paper architecture is designed to handle sensory data aggregated The designed software architecture is used to operate an application on the open source framework Storm. The application is conceptually used to transform streaming data which aggregated via sensor gateway by pipe-filter style.

• Journal of Korean Society on Water Environment
• /
• v.32 no.2
• /
• pp.149-162
• /
• 2016

In recent years, there has been demand for precise estimations of pollutant loads on nationwide scale for the development of appropriate site specific (watershed specific) policies to reduce the negative impact of pollutant loads. River flow data and water quality data that were previously collected by various research institutes and universities for specific research purposes for a limited period was utilized in this study. However, only TMDL 8-day interval flow and water quality data were available in national scale. Three watersheds were selected and pollutant loads were calculated by two methods i.e., Numeric Integration (NI) method and Soil and Water Assessment Tool (SWAT). Subsequently, the results were compared to determine the appropriate method for monitoring nonpoint source networks nationwide. The SWAT model was calibrated and its estimated daily flow data were used in the NI method with estimated sediment data for 8-day monitoring data for three watersheds. The results indicated that the quantity of pollutant loads estimated with the NI and SWAT are different to some degrees especially during the summer season for all the three study watersheds. Thus, more frequent sampling of water quality is needed for nonpoint source pollutant estimation.

• Journal of Haehwa Medicine
• /
• v.16 no.1
• /
• pp.31-40
• /
• 2007

Hominis placenta have been studied as herbal acupuncture because of it's limitation of use. The properties of Hominis placenta are warm and supplement of Jeong-Hyeol, Jin-Ki and I thought that Hominis placenta have various effectiveness. So I considered Hominis placenta in Dong-Eui-Bo-Gam which is famous comprehensive korean traditional medical book. Hominis placenta was mentioned parts of Sin, Chung, Hwa, Heo-Ro, Bu-In and most of them are mentioned in Heo-Ro part. As a source book, Eui-Hak-Ib-Mun was used the most. Prescription used in various parts as mental disease, forgetfulness, tuberculosis, fever, various malnutrition disease, sterility, but it's basic principle action is all supplement of Heo-Ro. In management of Hominis placenta, most useing method is heating with steam and most of additional medicinal stuffs had action of supplying Eum, Yang, Ki, Hyeol in composition of prescription.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.549-551
• /
• 2004

This paper used OPNET to simulate video streaming service a test IP network and MPLS network with the traffic shaping that have with CQ_ LLQ algorithm, LSP of fixed bandwidth, policy of limitation users and measures parameters such as delay, throughput, packet loss. To verify the performance of video streaming service in IP network and MPLS network, two scenario that have same topology and traffic source. One is the simulation for best-effort service in pure IP network. The other is the simulation for QoS-enabled service in MPLS Network. Based on simulation result, the MPLS network with CQ_ LLQ algorithm and fixed LSP show advantage of the video streaming service QoS, specially delay and packet loss

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.10
• /
• pp.65-73
• /
• 2002

Two CMOS composite transistors with an improved operating region by reducing the threshold voltage are proposed in this paper. And also, as an application of the proposed composite transistors, the transconductor is designed. The proposed composite transistor I and II employ a P-type folded composite transistor and a composite diode in order to decrease the threshold voltage, respectively. The limitation of the operating region of these transistors by current source is described. All circuits are simulated by HSPICE using 0.25${\mu}{\textrm}{m}$ n-well process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.04a
• /
• pp.73-77
• /
• 2003

The backlight unit(BLU) is used as a light source of TFT liquid-crystalline-display (TFT-LCD) module. In this backlight unit, one of important components is the light guide, which is usually made of transparent polymers. Currently the screen-printing method is mainly used for the light guide as a manufacturing process. However, it has limitation to the flexibility of three-dimensional optical design. In the present paper a new alternative manufacturing method for the light guide with low-cost is proposed. This manufacturing method is named as direct surface forming (DSF), which is very similar to the well-known hot embossing except for partial contact between mold and substrate. The results of this new manufacturing method are presented in terms of processing condition, dimensional accuracy, productivity, etc.

• Korea-Australia Rheology Journal
• /
• v.15 no.4
• /
• pp.167-171
• /
• 2003

The backlight unit (BLU) is used as a light source of TFT liquid-crystalline-display (TFT-LCD) module. In this backlight unit, one of important components is the light guide, which is usually made of transparent polymers. Currently, the screen-printing method is mainly used for the light guide as a manufacturing process. However, it has limitation to the flexibility of three-dimensional optical design. In the present paper a new alternative manufacturing method for the light guide with low-cost is proposed. This manufacturing method is named as direct surface forming (DSF), which is very similar to the well-known hot embossing except for partial contact between mold and substrate. The results of this new manufacturing method are presented in terms of processing condition, dimensional accuracy, productivity, etc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1342-1348
• /
• 1998

The major limitation of MOM solution has alaways been the computer CPU time and storage size, needed to carry out the impedance matrix computation. A new formulation technique using Sorce Superimposion method is presented in order to cut down computerstorage requirements and CPU time based on the equivalence principle and induction theorem. The numerical results are shown to give good agreement to those calculated by the conventional method and also application example is presented.