• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.72-77
• /
• 2024

Recently, the necessity for sound source localization has grown significantly across various industrial sectors. Among the sound source localization methods, sound intensimetry has the advantage of having high accuracy even with a small microphone array. However, the increase in localization error at high Helmholtz numbers have been pointed out as a limitation of this method. The study proposes a method to compensate for the bias error of the measured sound intensity vector according to the Helmholtz numbers by applying deep learning. The method makes it possible to estimate the accurate direction of arrival of the source by applying a dense layer-based deep learning model that derives compensated sound intensity vectors when inputting the sound intensity vectors measured by a tetrahedral microphone array for the Helmholtz numbers. The model is verified based on simulation data for all sound source directions with 0.1 < kd < 3.0. One can find that the deep learning-based approach expands the measurement frequency range when implementing the sound intensimetry-based sound source localization method, also one can make it applicable to various microphone array sizes.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.49-53
• /
• 1990

Laser plasma was generated by a 1 GW iodine photodissociation laser(λ=1.315${\mu}{\textrm}{m}$, E-12.7J) whose output beam was focused on a molybdenum target surface. The experiment was conducted in the vacuum chamber under 10-5Torr and several tens of laser shooting were necessary for sufficient exposure to the PBS resist. A speciman was put directly on the resist and located at a distance of 3cm from the X-ray source. The replicas of a mesh, spider's tread, a red blood cell were obtained by PBS resist and were analyzed by Nomarski and SEM. Two main effects of limitation in resolution, source size and Fresnel diffraction, are mentioned and compared with the experimental result. In this experiment, a resolution better than 1000A could be obtained.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.3
• /
• pp.69-76
• /
• 2015

The purpose of this paper is to find an limitation to detect the defect of damaged asphalt pavement structures for infrared thermography. We use heat source of a natural light to detect the defect efficiently. The heat source was applied to the asphalt specimens. Four asphalt specimens were used: one was the asphalt containing depth of 1cm internal timber, two was the asphalt containing depth of 2cm internal void, Three was the asphalt containing depth of 3cm internal timber and four was not the asphalt containing internal timber. It was found that the depth of 3cm internal timber could be detected by this method. In addition, we used the image processing to make the damage zone displayed clear in the image obtained from the thermographic operation.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1337-1344
• /
• 2013

This paper presents a simplified modulation strategy for the three-leg VSI fed two-winding induction motor. The strategy provides independent unbalanced voltage control for the main and auxiliary windings. This make the motor can be reversed rotation through the range of motor speed operation without limitation of voltage boost of the auxiliary winding. To study the advantages of the proposed drive, the experimental results such as voltage stresses, hysteresis band of the currents in locus, and also acoustic noise levels of the three-leg VSI are compared with those of the conventional two-leg topology. The results obviously show that the proposed technique achieves superior performance compared with the traditional scheme in case of dramatic increase of DC bus utilization, effective reduction of harmonic voltages content, and also significant enhancement of motor efficiency.

• Microbiology and Biotechnology Letters
• /
• v.25 no.6
• /
• pp.598-605
• /
• 1997

The characteristics of cell growth and cellulose production by Acetobcter xylinum BRC5 were studied in shaking flasks and jar fermentors. Of the substrates tested, the highest cellulose yield was obtained from the fructose medium. Some inductive cultivation was observed and then cellulose was produced with cell growth. When glucose alone or mixture of glucose and fructose was used as the carbon source, cellulose could be biosynthesized under the glucose limitation. Corn steep liquor (CSL), as a low-cost nitrogen source, was a good substitute for yeast extract. In a jar fermentor experiment, 4.14 g/l of disintegrated cellulose was obtained from 8% CSL- medium containing 0.5% glucose and 1.5% fructose.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.156-161
• /
• 2017

This work presents a novel structure for junction-less tunneling field effect transistor (JL-TFET) with a floating gate over the source region. Introduction of floating gate instead of fixed metal gate removes the limitation of fabrication process suitability. The proposed device is based on a heavily n-type-doped Si-channel junction-less field effect transistor (JLFET). A floating gate over source region and a control-gate with optimized metal work-function over channel region is used to make device work like a tunnel field effect transistor (TFET). The proposed device has exhibited excellent ID-VGS characteristics, ION/IOFF ratio, a point subthreshold slope (SS), and average SS for optimized device parameters. Electron charge stored in floating gate, isolation oxide layer and body doping concentration are optimized. The proposed JL-TFET can be a promising candidate for switching performances.

• KSBB Journal
• /
• v.25 no.1
• /
• pp.67-72
• /
• 2010

In this study, we developed a comprehensive correlation for better prediction of the activated sludge concentration in the relationship between measurement of optical density by the Beer's law and sludge properties. Effects of activated sludge properties, which are sludge types and anaerobic storage time, show that absorbance deviation for sludge properties decreased on wavelength of light source near to 950 nm. We also developed a method to measure limitation with non-linear correlation on the measurement of high concentration by the Beer's law using a double layer probe cell and empirical equations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.909-910
• /
• 2007

The volatile organic compounds exposure is governed by the source distance and dispersion of the pollutant into air and groundwater. The purpose of this study was to validate suggested models for the prediction of concentration distributions. The study design was organized into different methods to simulate industry site. The distribution models generally showed a fair agreement with measured data. For graphical representation of concentration of volatile hydrocarbon, it has to obtain a continuous representation of the contamination of the site. Therefore, the used interpolative methods examined for this project are the IDW(inverse Distance Weighting) and kriging method. In the results, in summary, all two different methods can be used to quantify exposures at a particular source area, and thus provide, a solid foundation for making risk-based decisions. All the calculations can be performed using Excel's built-in functions, and the capabilities of geospatial analysis allow the results to be displayed visually. However, anyone who uses these methods should understand all of the assumptions and limitation.

• Journal of Welding and Joining
• /
• v.31 no.4
• /
• pp.23-27
• /
• 2013

Laser heat source was used for automotive interior and exterior parts to reduce weights. Typically, 900's nm wavelength of laser has been widely used for polymer joining, however, the transmittance of the laser beam thorough clear polymers such as PMMA or PC has been an issue to overcome. To solve this issue, 1,940nm laser was applied on the clear polymer for the better absorption and 900nm laser beam was used for main laser for the joining. Conventional Gaussian or Elliptical heat source approximation has limitation in polymer which had deeper skin depth where major laser beam absorbs. To accurately simulate the physical laser beam absorption and joining optical properties were experimentally measured for the computer FEM simulation. The simulation results showed close correlation between theoretical and experimental results. The developed laser process is expected to increase productivity and gap closing which can cause failure of joining in laser material processing.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1334-1336
• /
• 2003

On the basis of comprehensive analysis and summarization of the image fusion algorithms provided by PCI Geomatica software, deficiencies in image fusion processing functions of this software are put forwarded in this paper. This limitation could be improved by further developing PCI Geomatica on the user’ side. Five effective algorithms could be added into PCI Geomatica. In this paper, the detailed description of how to customize and further develop PCI Geomatica by using Microsoft Visual C++ 6.0, PCI SDK Kit and GDB technique is also given. Through this way, the remote sensing imagery fusion functions of PCI Geomatica software can be extended.