• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.272-272
• /
• 2010

We have fabricated alumina thick films by inkjet printing technology. Two different types of ink system were formulated in order to understand their evaporation behaviors and their evaporation effects on the powder distribution on, the surface during inkjet-printed alumina thick films. Single solvent system was formulated with N,N-dimethylformamide(DMF), which led to coffee ring effects which non-uniformly distributed alumina particles on the substrate during the ink evaporation. However, Co-solvent system which consists of both Water and DMF produced relatively uniform distribution of the particles on the substrate. We believe that these two different distributions of alumina particles are attributed to the ink fluid flow directions in the ink droplets ejected from the different ceramic ink system. We have modulated inkjet parameters such as dot-to-dot distance, line-to-line distance, jetting velocity and jetting drop size in order to find out the optimum condition for the printing of alumina thick films from two different ink systems. The surface roughness, microstructures and dielectric properties of these inkjet-printed alumina thick films were investigated.

• Journal of the Korean Chemical Society
• /
• v.9 no.1
• /
• pp.61-65
• /
• 1965

Metal distribution in the reaction products and system of reactions between organo chloro acid or ester and zinc, silicon, magnesium, and tin under acetonitrile, dioxane, and toluene solvent were determined by means of radioactive tracer prepared by means of a (n, ${\gamma}$) reaction. It was found that the solubility of the organo halogen metal complex was markedly increased in a hydrophilic solvent and was decreased in a nonpolar solvent which resulted in an increased metal distribution in the recovered metal or water washing of the recovered metal mixture. This was also true in the case of the reaction conducted in the presence of a carbonyl compound. The relative increase of the solubility of the metal complex in a hydrophilic solvent was in order of zinc, silicon, tin and magnesium, and in a nonpolar solvent, it was in order of silicon, tin, magnesium, and zinc. There was no formation of organo metallics throughout the reaction sequence. The result was discussed and the observed solvent influence on the present reaction path was criticized.

• Membrane Journal
• /
• v.10 no.1
• /
• pp.19-29
• /
• 2000

To estimatc mutual diffusion coefficient for the analysis of mass transfer phenomena in polymer/solvent system, two models are proposed and the equations are derived. The estimates of mutual diffusion coefficients are obtained by two models suggested in this work and compared with and experimental data and Vrentas-Duda's. Vrentas-Duda's self diffusion coefficient was used for the mutual diffusion coefficient. Derivative of chemical potential on solvent was derived and used using original UNIFAC-FV and modified UNIFAC-FV. However, Vrentas-Duda's equation for mutual diffusion coefficient contains Flory-Huggins parameter x. For the derivative of chemical potential term, Vrentas-Duda assumed that parameter x was constant and independent of temperatures and concentrations The assumption is one of shortcoming in vrentas-Duda's mutual diffusion coefficient. New methods proposed in this work do not have such assumptions and simplifications. For the solvent of cyclohexane, n-pentane, and n-hexane in PIB(polyisolbutylene) and PMS-BR (poly(p-methylstyrene-co-isobutylene), new methods well correlate the experimental data at various temperatures and concentrations, and predicted the experimental data much better than Vrentas-Duda's for the PIB/toluene system. It is shown that new methods are excellent tools for correlating mutual diffusion coefficient data in polymer/solvent system over wide ranges of temperature and concentration without any assumptions or simplifications.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2015

This study was designed to determine the antioxidant activity of solvent fractions of broccoli sprouts grown by controlling the growing environment at the plant factory system. Fractionation was achieved with chloroform, n-hexane, ethyl acetate, butanol, water by 70% EtOH extract of the broccoli sprouts. Each solvent fraction was put through TLC and HPLC to separate active components. Higher antioxidant activities were observed for the butanol and ethyl acetate layers. Further evaluation of each of the 5 layers (LH1 to LH5) of the butanol fraction showed that the refined LH3 extract had a high antioxidant effect. Components with similar Rf values from TLC had the same retention times and peaks in the HPLC analysis. It was also determined that the sulforaphane content was high at the chloroform and butanol layers and the sulforaphane was responsible for, the high antioxidant activity. Thus, to use for functional materials, the butanol extract/layer of broccoli sprouts is recommended as the most effective.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.2
• /
• pp.115-122
• /
• 1997

The field of printing use to pressurization ink using screen gassamer that is called screen printing. Existing cleaning solvent using screen printing are the organic solvents including aromatic compounds carried with poisonous and stench. Besides, cleaning method of current screen printing are for the most part mixed cleaning method of dipping and polish. Using 1,1,1-TCE, CFC-113 alternative system cleaning solvent be substituted for existing cleaning solvent against screen printing ink measured the cleaning efficiency according to gravimetric analysis method and property change of gassamer according to Image Analyzer. Also, Cleaning process system carry with excellent cleaning efficiency studied which was proposed new cleaning process including ultrasonic and vibration cleaning process be substituted for existing mixed cleaning method of dipping and polish.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.465-469
• /
• 1999

Horseradish peroxidase(HRP) in organic solvent can be reactivated by evaporation. In order to measure the evaporation effect, the enzyme solutions were obtained by evaporation and dilution of organic solvent, respectively. Although two situations were thermodynamically identical, the activity from evaporation was higher than that from dilution. From the UV absorbance and the fluorescence intensity mesurements, it can be explained that reactivation of enzyme activity might be caused by reversible folding, and the enzyme obtained by evaporation was more refolded than that obtained by dilution.

• Journal of Radiation Protection and Research
• /
• v.28 no.1
• /
• pp.25-33
• /
• 2003

The automatic system for $^{67}Ga$ production using for the diagnosis of malignant tumor has been developed. A solvent extraction and an ion exchange chromatography were used for the separation $^{67}Ga$ from the irradiated enriched $^{68}Zn$. This system consisted of a solvent separation unit which was composed of micro conductivity cells, air supply tubes, solvent transfer tubes, solenoid valves and glasses, a PLC based controller and a PMU user interface unit for automation. The radiation exposure to the workers and the production time can both be reduced by employing this system during the $^{67}Ga$ production phase. After all, the mass production of $^{67}Ga$ with high efficiency was possible.

• KSBB Journal
• /
• v.6 no.3
• /
• pp.281-288
• /
• 1991

This research was carried to investigate the effects of several organic solvents on the enzymatic transphosphatidylation in emulsion and two-phase solvent systems. The solvents having a similar dielectric constant with diethylether were effective for the enzyme activity. Diethylether and butylacetate were the most effective solvents, when added 12-15%(v/v) and 10-40%(v/v), respectively, for the synthesis of phosphatidylglycerol, phosphatidylethyleneglycol and phosphatidylpropyleneglycol. In the emulsion system, the size of ovolecithin liposome was increased and the clearness of the phospholipid bilayer was reduced as increasing the diethylether concentration. In the twophase solvent system, the rapidest reaction was obtained when water-organic solvent ratio was close to 1. The ratio of aqueous phase. however, should be lowered to 37% to gain the sole product of transphosphatidy1ation, without phosphatidohydrolysis.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.523.1-523
• /
• 1986

To extend the spectrum of enzyme utilization in the organic solvent system, C. rugosal lipase was selected as a model enzyme because its substrate is soluble to organic solvent. One of the serious disadvantages in this system was the deactivation of the lipase. The pattern of lipase deactivation was the biphasic model. The activation energies for the deactivation were 14.05${\times}$10$^4$ KJ/Kg mole in the first phase and 3.59 ${\times}$ 10$^4$ KJ/mole in the second phase. The several factors were studied for their influences on the pattern of deactivation. Iso-octane as organic solvent influenced more on the first phase than the second phase. Urea as the reagent affecting boty hydrophobic interaction and hydrogen bond of enzyme also influencea more on the first phase. And the optimum pH for the activity was not correlated to that of the stability.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.2
• /
• pp.1-4
• /
• 1997

Existing cleaning solvent using screen printing are the organic solvents including aromatic compounds carried with poisonous and stench. besides, Cleaning method of current screen printing are for the most part mixed cleaning method of dipping and polish. Using 1,1,1-TCE, CFC-113 alternative system cleaning solvent be substituted for existing cleaning solvent against screen printing ink measured the cleaning efficiency according to gravimetric analysis method and property change of gassamer according to Image Analyzer. Also, Cleaning process system carry with excellent cleaning efficiency studied which was proposed new cleaning process including ultrasonic cleaning process be substituted for existing mixed cleaning method of dipping and polish.