• Structural Engineering and Mechanics
• /
• 제71권5호
• /
• pp.525-544
• /
• 2019

In the present study, buckling and free vibration analyses of annular thin sector plate made of functionally graded materials (FGMs) resting on visco-elastic Pasternak foundation, subjected to external radial, circumferential and shear in-plane loads is investigated. Material properties are assumed to vary along the thickness according to an power law with Poisson's ratio held constant. First, based on the classical plate theory (CPT), the governing equation of motion is derived using Hamilton's principle and then is solved using the generalized differential quadrature method (GDQM). Numerical results are compared to those available in the literature to validate the convergence and accuracy of the present approach. Finally, the effects of power-law exponent, ratio of radii, thickness of the plate, sector angle, and coefficients of foundation on the fundamental and higher natural frequencies of transverse vibration and critical buckling loads are considered for various boundary conditions. Also, vibration and buckling mode shapes of functionally graded (FG) sector plate have been shown in this research. One of the important obtained results from this work show that ratio of the frequency of FG annular sector plate to the corresponding values of homogeneous plate are independent from boundary conditions and frequency number.

• Journal of Plant Biotechnology
• /
• 제8권1호
• /
• pp.21-25
• /
• 2006

Phragmites australis (reed) has received much attention as being one of the principle emergent aquatic plants for treating industrial and civil wastewater. Plant regeneration via plant tissue culture in p. australis was investigated. Three types of callus were identified from seeds on N6 medium plus 4.5 UM 2,4-dichlorophenoxyacetic acid (2,4-D). Yellow compact type showed the best redifferentiation, whereas white compact type and yellow friable were not competent to differentiate into plane. Solid medium culture was better than liquid suspension culture for enhancing callus growth when N6 medium supplemented with 4.5 ${\mu}M$ 2,4-D was used. Phytagel, as a gelling agent, was superior to agar in plant regeneration on N6 medium, supplemented with 9.4 ${\mu}M$ kinetin and 0.54 ${\mu}M$ $\alpha$-naphthaleneacetic acid (NAA). Transfer of the plantlets regenerated from kinetin and NAA-supplemented N6 medium to growth regulator-free MS medium enhanced the further development of the plantlets. Plantlets on subsequently grown to maturity when tansferred to potting soil. The regenerated plants exhibited morphologically normal. The system for plant regeneration of P. australis enables to propagate elite lines on a large scale for water purification in the ecosystem

• Journal of Forest and Environmental Science
• /
• 제23권1호
• /
• pp.5-9
• /
• 2007

Zygotic embryos just after harvest of seeds were immature globular to heart stage. Maturation of zygotic embryos rapidly proceed when zygotic embryos together with small excised parts of endosperm were cultured on 1/3-strength MS solid medium with 2% sucrose, and the zygotic embryos were germinated within two months. Embryogenic callus was formed from the excised segments of germinating zygotic embryos of Eleutherococcus pedunclus on Murashige and Skoog (MS) medium with $4.5{\mu}M$ 2,4-D. The embryogenic callus formation occurred at a low frequency (less than 7%) from hypocotyl segments. The embryogenic calli were maintained on the same medium as primary medium. High frequency somatic embryogenesis was obtained after the cells were transferred to medium lacking 2,4-D. Cotyledonary embryos were germinated and converted into plantlets on medium with $20{\mu}M$ $GA_3$. Embryogenic callus and somatic embryos were produced spontaneously on the surfaces of roots and/or hypocotyls of plantlets. The frequency of embryogenic callus formation was 85% in roots and 34% in hypocotyls. Therefore maintain of cell lines performed very easily. Plantlets with developed epicotyls at more than 3 cm acclimatized at high frequency (89%). While plantlets with small epicotyls (less than 1 cm) were acclimatized at low rate (32%). The soil survived plantlets produced new sprouts after over wintering in the field.

• Journal of Pharmaceutical Investigation
• /
• 제41권4호
• /
• pp.239-247
• /
• 2011

Simvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase, which catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin has good permeability, but it also has low solubility (BCS class II), which reduces its bioavailability. To overcome this problem, a solid dispersion is formed using a spray-dryer with polymeric material carrier to potentially enhance the dissolution rate and extend drug absorption. As carriers for solid dispersion, Gelucire$^{(R)}$44/14 and Gelucire$^{(R)}$ 50/13 are semisolid excipients that greatly improve the bioavailability of poorly-soluble drugs. To avoid any toxic effects of an organic solvent, we used aqueous medium to melt Tween$^{(R)}$ 80 and distilled water. The structural behaviors of the raw materials and the solid dispersion were analyzed by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM). The DSC and PXRD data indicated that the crystalline structure of simvastatin was transformed to an amorphous structure through solid dispersion. Then, solid dispersion-based tablets containing 20 mg simvastatin were prepared with excipients. Dissolution tests were performed in distilled water and artificial intestinal fluid using the USP paddle II method. Compared with that of the commercial tablet (Zocor$^{(R)}$ 20 mg), the release of simvastatin from solid dispersion based-tablet was more efficient. Although the stability study is not complete, this solid dispersion system is expected to deliver poorly water-soluble drugs with enhanced bioavailability and less toxicity.

• 한국미생물·생명공학회지
• /
• 제26권4호
• /
• pp.369-372
• /
• 1998

Microbial insecticide formulations were prepared by liquid and semi-solid fermentations using Bacillus thuringiensis subsp. kurstaki, HL-106 (BTK-HL106), B. thuringiensis subsp. israelensis HL-63 (BTI-HL63) and B. sphaericus 1593 (BS-1593) strains. The liquid fermentation medium contained molasses 2%, dextrose 1.5%, peptone 2%, D-xylose 0.025%, CaCl$_2$ 0.1%, K$_2$HPO$_4$ 0.1%, KH$_2$PO$_4$ 0.1%, MgSO$_4$$.$7H$_2$O 0.03%, FeSO$_4$$.$7H$_2$O 0.002%, ZnSO$_4$$.$7H$_2$O 0.02%. The composition of the semi-solid fermentation medium was rice bran 45.2%, zeolite 31%, yeast powder 0.02%, corn powder 5%, dextrose 3%, lime 0.3%, NaCl 0.06%, CaCl$_2$ 0.02%, and H$_2$O 15.42%. Insecticide formulations produced in the liquid fermentation named BTK-HL106, BTI-HL63 and BS-1593 pesticides and those in the semi-solid fermentation were designated as BTK-HL106-1, BTI-HL63-1 and BS-1593-1 pesticides, respectively. The number of spore (endotoxin crystals) was 2.65${\times}$10$\^$9/ spores per $m\ell$ in the BTK-HL106 and 3.5${\times}$10$\^$10/ in the BTK-HL106-1 3.8${\times}$10$\^$9/ spores in the BTI-HL63 and 7.0${\times}$10$\^$10/ in the BTI-HL63-1, and 7.5${\times}$10$\^$9/ in the BS-1593 and 1.4${\times}$10$\^$10/ in the BS-1593-1. The spores in the BS-1593 formulation was produced two times more than the other formulations. The spores in the BTI-HL63-1 were contained twice than those in the BTK-HL106-1, and five times than those in the BS-1593-1. The results indicated that spore (endotoxin crystals) productions in the semi-solid fermentation increased about ten times than those in the liquid fermentations. $LC_{50}$s of the BTI-HL63 and BS-1593 were 4.5 $\mu\textrm{g}$, and those of the BTI-HL63-1 and BS-1593-1 were 1.5 $\mu\textrm{g}$. $LC_{50}$ of the BTK-HL106 was 1.5 mg and that of the BTK-HL106-1 was 0.9 mg. The $LC_{50}$s of the formulations in the semi-solid fermentations showed about two to three times higher than those in the liquid fermentations.

• Journal of Plant Biotechnology
• /
• 제35권1호
• /
• pp.75-80
• /
• 2008

마늘의 경정을 기내배양하여 대량의 기내종구를 생산하기 위한 다신초의 유기 및 기내구의 비대조건을 찾고자 배지의 당의 농도를 다르게 하고 또한 생장조절물질을 첨가하여 신초의 대량발생 여부를 확인하였으며, 대형배양용기를 이용하여 대량생산을 하기 위한 tank배양에서 신초의 분화와 기내구의 발달에 관하여 검토하였다. 경정배양에서의 shoot 발생이나 기내구 형성 모두 3% sucrose 첨가 MS고체배지에서 8% 보다 양호하였으며, 생장조절물질의 효과는 2 mg/L 2iP와 0.2 mg/L IAA의 혼합처리에서 shoot 발생과 bulb의 형성수가 양호하였다. 이 처리구에서 발생한 shoot와bulb의 수는 각각 3.3 및 2.7개로 나타났다. 다신초를 유도할 수 있는 조건의 배지에서 경정을 2개월 동안 배양하여 다신초를 분화시킨 후, 20 L water tank를 이용하여 sucrose 농도를 3%와 8%로 설정한 MS액체배지에 옮겨 45일간 배양한 후에 bulb형성을 조사하였을 때 유식물체의 생육에 있어서는 3% sucrose 첨가조건에서 8% 첨가배지보다 양호하였다. 그러나 기내구의 형성이나 생장에 있어서는 sucrose의 농도가 8%일 때 보다 효과적이었다. 경정배양에서의 다신초의 초기생산에는 3% sucrose조건에서 양호한 효과를 보이고 있으므로 마늘의 인경구를 대량으로 생산하기 위해서는 다신초의 생산과 구비대 과정을 구분하는 2단계 배양법을 도입하는 것이 유리할 것이다. Tank배양시 배지에 0.2 mg/L BA, 0.02 mg/L NAA를 첨가한 처리에서 양호하였으며 NAA 농도가 높을 수록 유식물체의 생육이나 구비대의 효과는 현저하게 저하되었다.

• Coupled systems mechanics
• /
• 제9권4호
• /
• pp.343-358
• /
• 2020

The present research deals with the time-harmonic deformation in transversely isotropic magneto thermoelastic solid with two temperature (2T), rotation due to inclined load and laser pulse. Generalized theory of thermoelasticity has been formulated for this mathematical model. The entire thermo-elastic medium is rotating with uniform angular velocity and subjected to thermally insulated and isothermal boundaries. The inclined load is supposed to be a linear combination of a normal load and a tangential load. The Fourier transform techniques have been used to find the solution to the problem. The displacement components, stress components, and conductive temperature distribution with the horizontal distance are computed in the transformed domain and further calculated in the physical domain using numerical inversion techniques. The effect of angle of inclination of normal and tangential load for Green Lindsay Model and time-harmonic source for Lord Shulman model is depicted graphically on the resulting quantities.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.135-137
• /
• 2014

Excess enthalpy flame propagating an porous inert medium, which recirculate exhaust heat to the upstream cold mixture, is theoretically analyzed. Using the activation-energy asymptotics, the flame structure is divided into the thin reaction and the gas-phase preheat zone, as is traditionally done. Ahead and behind of the two, there exist an outer preheat zone, where heat is convectively transferred from solid to gas, and a downstream re-equilibrium zone, where thermal equilibrium between phases is established. Asymptotic solutions of species and energy equations in each zone are obtained and then matched to each other, and finally the mass burning rate is obtained as a function of the flame propagation velocity with respect to the solid phase and physical properties of gas and solid.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.379-381
• /
• 2009

The simulation model for metal-supported Solid Oxide Fuel Cell(SOFC) is developed in this study. Open circuit voltage is calculated using Nernst equation and Gibbs free energy is required by thermodynamic. The exchange current densities are compared with experimental results since exchange current density is most effective factor for the activation loss. Liu's study is used for the exchange current density of cathode, BSCF, and Koide's result is applied for the exchange current density of anode, Ni/YSZ. For the ohmic loss, ionic conductivity of YSZ is described from Kilner's mode and the data are compared with Wanzenberg's experimental data. Diffusivity is an important factor for the mass transfer through the porous medium. Both binary diffusion and Knudsen diffusion are considered as the diffusion mechanism. For validation, simulation results at this work are compared with our experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1714-1716
• /
• 1998

The surface breakdown problem has plagued the development of high solid state for more than 30 years, but the physical basis for this flashover phenomenon is still not understood. The only way to overcome those problem and has a workable compact solid state switch is to passivate the surface by a solid state dielectric material, to coating/encapsulation the device in an insulting medium. In this paper, characteristics of flashover in high field Si-dielectric system behavior under high electric field is discussed.