• 한국물환경학회지
• /
• 제33권5호
• /
• pp.572-579
• /
• 2017

Increased impervious surface caused by rapid urbanization serves to produce the discharge of non-point source pollutants such as total suspended solid (TSS). There exist various methods of removing TSS, including a filtration process using granular media (a well-known method to be practically used after the consideration of removal efficiency, clogging, and backwashing efficiency). To determine the TSS removal capability of the filter, we initially performed lab-scale experiments which assessed flow rates, influent concentrations, permeability co-efficients, the particular shapes of suspended solids and potential clogging, and also evaluated TSS removal efficiency when applied to filtration facility in a pilot-scale. In low filtration flux condition, the removal efficiency of suspended solids was more than 95 %, while decreased to 83% in high filtration flux. Regarding the clogging aspect of the experiment, total cumulative solids were loaded up to $19.15kg/m^2$, and TSS removal efficiency was noted to commence to decrease when the loaded solids exceeded $9.0kg/m^2$. It was also noted, however, that superior efficiency was maintained for six hours. In addition, for pilot-scale experiment, the removal efficiency was still high enough (83.4 %) for the solid concentration of 140 ~ 343 mg SS/L and after backwashing, head loss was recovered to 92 ~ 95 % during two hour filtration. With these results, It was confirmed that lifetime of the filter applied to the test was prolonged due to the high treatment efficiency and good backwashing efficiency for the cumulative solids load.

• 한국습지학회지
• /
• 제16권3호
• /
• pp.347-353
• /
• 2014

여과분리형 생물반응조 운전에서 발생하는 flux 감소 원인을 분석하였고, 상등수 수질과 침강성 변화가 flux에 미치는 영향을 평가하였다. 또한 여과막 모듈과 역세정 장치 일체형 시스템의 특성을 평가하였다. 반응조는 17L 유효 용적의 아크릴 반응조에 $100{\mu}m$ 공경의 여과막 모듈을 통해 배출되는 여과시스템으로, 여과시간이 경과함에 따라 상등수의 수질 특히 탁도와 TOC의 수질이 악화됨에 따라 flux가 점진적으로 감소하였다. MLSS 농도가 18000mg/L 이상에서는 여과저항이 급격히 증가하였다. 상등수의 수질과 flux와의 관계를 규명하기 위해서는 MLSS 농도가 10000mg/L 이상에서는 곤란함에 따라 5000mg/L이 적절한 것으로 판단된다. 활성슬러지 플록을 파괴시켜 SVI를 250으로 조정하여 여과를 시작한 경우, 상등수의 탁도가 증가하여, 침강성이 악화됨에 따라 flux도 점차 감소하였다. 여과막 모듈과 폭기세정 장치를 일체화한 시스템에서 공기 공급은 30~60초 정도로 설정함이 적정한 것으로 나타났다.

• 대한임상검사과학회지
• /
• 제51권2호
• /
• pp.177-184
• /
• 2019

Mycobacterium은 느리게 성장한다. 따라서 고체배지는 8주, 액체배지는 6주 동안 사용하여야 한다. 이 연구의 목적은 Mycobacterium을 빠르게 성장시킬 수 있는 성장 인자를 찾고, 신속한 동정을 위한 고체배지를 개발하는 데 도움을 주는 것이다. $Difco^{TM}$ Mycobacteria 7H11 agar (Becton, Dickinson and Company)에 activated charcoal, defibrinated sheep blood, L-ascorbic acid를 첨가하여 10종의 Mycobacteria 가지고 Mycobacterium 성장 인자 3가지를 평가하였다. 집락의 검출 시간 및 판독 용이성을 현재의 방법과 비교하였다. 빠르게 성장하는 Mycobacterium 있어 새로운 배지와 기존의 배지에서 검출 시간의 차이는 새로운 배지가 더 빠르다는 것을 확인시켜 주었다. M. kansasii와 M. intracelluare는 7H11 배지보다 7H11 C 배지에서 더 빠르게 자라는 것으로 확인되었다. MTB는 7H11 C 배지에서 다른 배지보다 빠르게 성장하였다. 이 연구는 2 두 가지 성장 인자가 빠르게 성장하는 Mycobacteria과 느리게 성장하는 Mycobacteria에 영향을 주는 것으로 확인되었다. 7H11 C 배지는 색상 대비로 인하여 10종의 모든 Mycobacterium에서 기존배지보다 더 뛰어난 판독 용이성을 보여 주었다. 특히, MTB가 성장했을 경우 집락의 크기가 다른 배지에서 보다 커서 시각화가 용이하였다.

• 상하수도학회지
• /
• 제14권1호
• /
• pp.37-44
• /
• 2000

Laboratory experiments were conducted to investigate the performances of anaerobic filters packed with ceramic tube and pall-ring media treating a dairy waste. The media packing volume was 65% of effective volume of anaerobic filter. Organics removals of anaerobic filters were maintained above 80% even at an organics loading rate of $10kgCOD/m^3/d$, and this was comparable to aerobic treatment of organic wastes. Organics removals of the ceramic tube anaerobic filters were always lower than those of the pall-ring anaerobic filters due to intrinsic physical property of ceramic tube, especially lower void space which caused to clogging and entrapment of biogas, substrate transfer limitation, and irregular evolution of biogas leading to loss of solids and biomass. This was clearly observed in higher concentration of TSS in the effluent from the ceramic tube anaerobic filter despite of higher retention capacity of TSS compared with pall-ring media. Vertical distribution of organics and solids in the filters showed above 90% of organics and solids in influent were removed below 20% of reactor height, and 50% of remaining organics and solids were removed though media packing zone. Effluent quality from the anaerobic filter was heavily depended on media itself as well as suspended biomass formed below media. It is therefore concluded that the type of media played an important role in biomass accumulation arid gas-liquid-solid separation efficiency. Type of media did not affect the start-up behaviors of the anaerobic filter, and supernatant from anaerobic digested sludge showed a good performance as a seeding materials.

• 전기화학회지
• /
• 제18권2호
• /
• pp.45-50
• /
• 2015

본 연구에서는 리튬 이온 전도성 세라믹 고체전해질($Li_{1+x+y}Al_xTi_{2-x}Si_yP_{3-y}O_{12}$, LATP)의 알칼라인 용액 내에서의 화학적 안정성을 증가시키기 위하여, 고체전해질 표면을 질화 공정 처리를 통해 개질하였다. LATP 고체전해질의 화학적 안정성 및 전기화학 특성과 관련된 고체전해질 표면 형상 및 구조 특성 등을 X-선 회절법, X-선 광전자 분광법, 주사 전자 현미경 및 임피던스 측정을 통하여 분석하였다. 질화 처리된 LATP 시료를 30일간 알칼라인 용액에 담지하여, 표면 처리하지 않은 시료와 비교시 향상된 화학적 안정성을 나타냈으며, 이를 하이브리드 리튬-공기 전지에 적용하여 비교시 개선된 충방전 분극 및 효율 특성을 보였다. 이러한 결과를 바탕으로 질화 처리 공정을 통한 표면 개질은 알칼라인 용액내에서의 세라믹 고체전해질의 화학적 안정성을 증가시키는데 효과적으로 도움이 될 것으로 판단된다.

• 한국산림과학회지
• /
• 제95권3호
• /
• pp.358-364
• /
• 2006

송이균의 환경조건에 따른 생장특성을 구명하고자 송이균을 고체매질을 이용하여 배양하였다. 고체매질에서의 송이균의 생장량은 에르고스테롤 함량을 분석하여 비교하였다. 송이균의 배양에 적합한 고체매질은 펄라이트와 마사토로 나타났으며 곡물 영양분으로는 보리가 우수하였다. 적정화된 고체배지에서 송이균의 생장은 송이균의 접종 후 2주부터 급격히 생장하였으며 8주 경에 최고의 생장량을 나타냈다. 송이균 배양에 적합한 수분함량은 30~70%였으며 부엽토 첨가(10%)가 생장에 더욱 양호하였다. 이러한 결과는 송이산지에서 토양유기물이 적절히 있고 토양수분이 높을 때에 송이균의 생장이 왕성할 것으로 추정할 수 있다. 고체배지에서 송이균사체를 접종 후 2주부터 급격히 생장하였으며 8주 경에 최고의 생장량을 나타냈다. 이러한 고체매질은 앞으로 송이 균사체의 생리연구에 이용될 수 있을 것이다.

• 한국인쇄학회지
• /
• 제27권1호
• /
• pp.15-27
• /
• 2009

Since domestic offset print quality control depends on the experience of persons in charge rather than objective data, the standards from the data are needed for the well-organized quality management of high-quality prints. Based on the ISO standards, now the standard specifications, such as GRACoL 7, SWOP 11, SNAP, G7 in America, and EURO Color, ECI, BVDM in Europe, and Japan Color 2001, Japan Color 2004 in Japan, are employed. There exists KS for domestic standards. However, since it has been directly imported from ISO Standards, there are discrepancies in printing materials and media. Although the quality management of commercial prints has been focused and studied. For this circumstance, standards are needed for the production of prints to meet international standards. This paper aims to find out suitable ways to approach domestic printing standards using densitometric method and colorimetric method. Printing experiments on this study were performed with domestic process color inks(Cyan, Magenta, Yellow, Black) and domestic coated papers, under the same conditions as the actual commercial printing processes. In densitometric method, how to set up the optimal solid print density was studied through three tests such as the ways to match solid print density and print contrast to GRACoL standards respectively, and the way to get the highest contrast. In colorimetric method, how to get solid print density with the minimum color difference between the $CIEL^*a^*b^*$ color specification values in GRACoL standards and the measured color specification values in prints, was studied.

• Korea-Australia Rheology Journal
• /
• 제11권4호
• /
• pp.275-278
• /
• 1999

Soft polymeric materials have gained importance in recent years, namely in food, pharmaceuticals, photographic media, adhesives, vibration dampeners and superabsorbers (to name a few), but also as inter-mediates for selforganization of molecules or supramolecules into long range order. Many of these soft materials are close to their gel point, i.e. they are liquids just before reaching their gel point or they are solids which have barely passed the gel point. New rheological methods need to be developed for the understanding of these soft materials; the typical liquid properties (viscosity) and typical solid properties (modulus) are not applicable since they diverge at the gel point. This will be discussed in the following. Fortunately, chemical gelation experiments with model polymers has given insight into the behavior at the gel point (Winter and Mours, 1997). This knowledge of the critical gel provides us with a reference state when working with soft polymeric materials. Chemical gels will serve as model materials for the exploration of physical gels. A novel method for detecting the gel point has been proposed: the instant of liquid-to-solid transition(gel point) is marked by the crossover of the normalized dynamic moduli G'/cos($n_c$$\pi$/2) and G"/sin($n_c$$\pi$/2).>/2).

• 한국축산시설환경학회지
• /
• 제14권1호
• /
• pp.1-8
• /
• 2008

This study was conducted to solve the problem of public grievance owing to odor of a pig farm. Odor emissions from pig production systems mainly originate from liquid manure storage and solid manure fermentation. The low-cost odor abatement system (OAS) for application at liquid manure storage tank and solid manure fermentation facilities was developed in this study. The OAS adapted odor removing principles of a biofilter and biotrickling filter. The OAS is very simplified in structure. The appearance of the OAS had a form of cylindrical or cubical shape. The system performance was monitored for about one year after stabilization. A 7 seconds empty bed contact time for the OAS was adapted to achieve the odor reduction levels. The commercial type of OAS was constructed with media comprised of wood chips. Moisture content always remained above 50% wet basis. Average ammonia removal efficiency for the developed design was 89% at the liquid manure storage tank. Also, the removal efficiency at a solid manure fermentation facility was 86% on ammonia.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.191-194
• /
• 2003

In this study, permeability tensor is computed for a three dimensional braided preform by applying a FVM to a unit cell. It is evident that resin will flow through the inter-tow and the intra-tow regions when pressure gradient is applied to the resin. The intra-tow region in the braided preform is regarded as not only an impermeable solid but also a permeable porous media. When the intra-tow region is excluded from domain of flow analysis in the case of the impermeable solid, the Stokes equation is computer for only inter-tow region. (omitted)