• 천문학논총
• /
• 제18권1호
• /
• pp.25-35
• /
• 2003

In this paper, we have re-examined the relative sunspot numbers from June 1987 to December 2002 observed at Korea Astronomy Observatory. For this we determined conversion factors (K) for each year data to derive the relative sunspot numbers. The estimated conversion factor ranges from 0.57 to 1.09 and has a trend to decrease with time, which seem to depend on the several effects such as observational system, observation methods, and experience of an observer. Our analysis shows that the newly-determined relative sunspot numbers are in much better agreements with the international sunspot numbers than the previously-determined ones in which the conversion factors were determined only four times. This result implies that we should determine the conversion factor for each year data. From these investigations, we also identified one and half solar cycles form our relative sunspot number.

• 신재생에너지
• /
• 제16권4호
• /
• pp.49-64
• /
• 2020

Photovoltaic and Thermal collector (PV/T) systems are renewable energy devices that can produce electricity and heat energy simultaneously using solar panels and heat exchangers. Since PV/T systems are exposed to the outdoors, their reliability is affected by various environmental factors. This paper presents a reliability test for a PV/T system and evaluates the test results. The reliability assessment entails performance, environment, safety, and life tests. The factor that had the greatest influence on the life of the system was the hydraulic pressure applied to the heat exchanger. A test was conducted by repeatedly applying pressure to the PV/T system, and a reliability analysis was conducted based on the test results. As a result, the shape parameter (β) value of 5.6658 and the B10life 308,577 cycles at the lower 95% confidence interval were obtained.

• 한국태양에너지학회 논문집
• /
• 제34권4호
• /
• pp.17-22
• /
• 2014

The design of a fuel cells stack is important to get optimal output power. This study focuses on the evaluation of fuel cell system for unmaned aerial vehicles (UAVs). Low temperature proton exchange membrane (LTPEM) fuel cells are the most promising energy source for the robot applications because of their unique advantages such as high energy density, cold startup, and quick response during operation. In this paper, a 600 W open cathode LTPEM fuel cell was tested to evaluate the performance and to determine optimal operating conditions. The open cathode design reduces the overall size of the system to meet the requirement for robotic application. The cruise power requirement of 600 W was supported entirely by the fuel cell while the additional power requirements during takeoff was extended using a battery. A peak of power of 900 W is possible for 10 mins with a lithium polymer (LiPo) battery. The system was evaluated under various load cycles as well as start-stop cycles. The system response from no load to full load meets the robot platform requirement. The total weigh of the stack was 2 kg, while the overall system, including the fuel processing system and battery, was 4 kg.

• Current Photovoltaic Research
• /
• 제4권3호
• /
• pp.108-113
• /
• 2016

III-V compound semiconductor based thin film solar cells promise relatively higher power conversion efficiencies and better device reliability. In general, the thin film III-V solar cells are fabricated by an epitaxial lift-off process, which requires an $Al_xGa_{1-x}As$ ($x{\geq}0.8$) sacrificial layer and an inverted solar cell structure. However, the device performance of the inversely grown solar cell could be degraded due to the different internal diffusion conditions. In this study, InGaP/GaAs double-junction solar cells are inversely grown by MOCVD on GaAs (100) substrates. The thickness of the GaAs base layer is reduced to minimize the thermal budget during the growth. A wide band gap p-AlGaAs/n-InGaP tunnel junction structure is employed to connect the two subcells with minimal electrical loss. The solar cell structures are transferred on to thin metal films formed by Au electroplating. An AlAs layer with a thickness of 20 nm is used as a sacrificial layer, which is removed by a HF:Acetone (1:1) solution during the epitaxial lift-off process. As a result, the flexible InGaP/GaAs solar cell was fabricated successfully with an efficiency of 27.79% under AM1.5G illumination. The efficiency was kept at almost the same value after bending tests of 1,000 cycles with a radius of curvature of 10 mm.

• 한국세라믹학회지
• /
• 제51권3호
• /
• pp.170-176
• /
• 2014

Effective glass frit compositions enabled to absorb laser energy, and to seal a commercial dye-sensitized solar-cell-panel substrate were developed by using $V_2O_5$-based glasses with various amounts of $TeO_2$ substitution. The latter was intended to increase the lifetime of the solar cells. Substitution of $V_2O_5$ by $TeO_2$ provided a strong network structure for the glasses via the formation of tetrahedral pyramids in the glass, and changed the various glass properties, such as glass transition temperature ($T_g$), dilatometric softening point ($T_d$), crystallization temperature, coefficient of thermal expansion (CTE), and glass flowage without any detrimental effect on the laser absorption property of the glasses. The thermal expansion mismatch (${\Delta}{\alpha}$) between the glass frit and the substrate could be controlled within less than ${\pm}5%$ by addition of 10 wt% of ${\beta}$-eucryptite. An 810 nm diode laser was used for the sealing test. The laser sealing test revealed that the VZBT20 glass frit with 10 wt% ${\beta}$-eucryptite was successfully sealed the substrates without interfacial cracks and pores. The optimum sealing conditions were provided by a beam size of 3 mm, laser power of 40 watt, scan speed of 300 mm/s, and 200 irradiation cycles.

• 한국세라믹학회지
• /
• 제52권2호
• /
• pp.103-107
• /
• 2015

The effective glass frit composition used to absorb laser energy and to seal commercial dye-sensitized solar cell panel substrates has been previously developed using $V_2O_5-TeO_2$-based glass with 10 wt% ${\beta}$-eucryptite as a CTE controlling filler. The optimum sealing conditions are provided using a 3 mm beam, a laser power of 40 watt, a scan speed of 300 mm/s, and 200 irradiation cycles. In this study, the feasibility of the developed glass frit is investigated in terms of the sealing strength and chemical durability against the commercial iodide/triiodide electrolyte solution and fluorine-doped tin oxide (FTO) electrode in order to increase the solar cell lifetime. The sealing strength of the laser-sealed $V_2O_5-TeO_2$-based glass frit is $20.5{\pm}1.7MPa$, which is higher than those of thermally sealed glass frit and other reported glass frit. Furthermore, the developed glass frit is chemically stable against electrolyte solutions. The glass frit constituents are not leached out from the glass after soaking in the electrolyte solution for up to three months. During the laser sealing, the glass frit does not react with the FTO electrode; thus, the resistivity of the FTO electrode beneath the laser-sealed area remains the same.

• 에너지공학
• /
• 제15권2호
• /
• pp.107-117
• /
• 2006

물을 분해하여 수소를 만드는 방법으로서 열화학싸이클을 이용한 방법에 대하여 그동안의 연구 동향에 대하여 살펴보았다. 수소생산이란 관점에서 열화학싸이클이 갖는 장점은 일정한 고온의 열을 얻을 수 있다면, 반응속도의 향상과 아울러 대용량화가 가능하다는 점이다. 안정한 물을 분해하려면 물의 산화/환원이 용이한 매개체를 써서 수소 및 산소를 발생하게 하고 순환시키게 되는데, 매개체가 유독성 물질이라면 이 과정에서 누출이 되지 않도록 하여야 한다. 아직 상용화단계에는 미치지 못하였지만, 일본, 스위스, 이스라엘, 미국, 한국 등에서 집중적으로 연구되고 있는 내용은 IS 싸이클과 ZnO/Zn, $Fe_3O_4/FeO$등과 같은 금속산화물계를 이용한 싸이클들이며, 고온용 및 내부식성 소재와 시스템 분야에서 아직 해결해야할 점이 많다.

• 한국지리정보학회지
• /
• 제22권3호
• /
• pp.65-81
• /
• 2019

24절기는 연중 계절 변화를 기술하기 위해 만들어진 중국의 전통적인 천문학적 구분 방식이다. 본 연구는 지난 40년간의 기상 자료 분석을 통해 한반도 절기 기온이 전반적으로 상승했음을 보여주었다. 북한의 경우 청명, 소설, 대설을 제외한 21개 절기 기온이 모두 상승했으며, 계절별로 봄, 여름, 가을, 겨울에 해당하는 절기의 평균기온은 각각 $0.87^{\circ}C$, $1.19^{\circ}C$, $1.45^{\circ}C$, $0.64^{\circ}C$ 상승했다. 가을철 기온 상승의 폭이 커진 결과 여름의 지속 기간이 길어졌고, 겨울에 비해 상대적으로 여름의 기온이 더 큰 폭으로 상승하였다. 남한의 경우, 18개 절기의 기온이 상승했는데, 계절적으로는 가을과 겨울철을 중심으로 상승하였다. 다른 절기에 비해 대설은 기온 하강 폭이 현저히 크게 나타났는데, 이러한 경향은 남북한 차이 없이 공통적인 특징으로 조사되었다. 연중 가장 추운 절기를 나타내는 대한의 기온은 연구 기간 동안 현저한 증가 추세($3.08^{\circ}C$)를 보인 반면, 여름 절기인 소서의 기온 증가 폭은 $0.29^{\circ}C$에 그쳐 상대적으로 미미하였다. 최근 연중 극서일과 첫서리일 발생은 남북한 지역 전체적으로 과거에 비해 대서와 상강 절기보다 각각 늦어지는 경향을 보인 반면, 극한일의 발생은 대한 절기보다 일찍 나타나는 추세를 보였다. 연구 기간 동안의 절기별 기온 변화를 분석한 결과, 대서와 상강의 절기 부합도는 북한 지역에서, 대한의 절기 부합도는 남한 지역에서 각각 더 높게 조사되었다.

• 한국태양에너지학회 논문집
• /
• 제30권3호
• /
• pp.124-130
• /
• 2010

Ocean Thermal Energy Conversion(OTEC) power plants have been examined as a viable option for supplying clean energy. This paper evaluated the thermodynamic performance of the OTEC Power system for the production of electric power and desalinated water. The results show that newly developed fluids such as R32, R125, R143a, and R410A that do not cause stratospheric ozone layer depletion perform as well as R22 and ammonia. Overall cycle efficiency of open cycle is the lowest value of 3.01% because about 10% of the gross power is used for pumping out non-condensable gas. Also, the hybrid cycle is an attempt to combine the best features and avoid the worst features of the open and closed cycles. The overall cycle efficiency of hybrid cycle is 3.44% and the amount of desalinated water is 0.0619 kg/s.

• Journal of Astronomy and Space Sciences
• /
• 제28권4호
• /
• pp.261-265
• /
• 2011

We investigate the sunspot area data spanning from solar cycles 1 (March 1755) to 23 (December 2010) in time domain. For this purpose, we employ the Hilbert transform analysis method, which is used in the field of information theory. One of the most important advantages of this method is that it enables the simultaneous study of associations between the amplitude and the phase in various timescales. In this pilot study, we adopt the alternating sunspot area as a function of time, known as Bracewell transformation. We first calculate the instantaneous amplitude and the instantaneous phase. As a result, we confirm a ~22-year periodic behavior in the instantaneous amplitude. We also find that a behavior of the instantaneous amplitude with longer periodicities than the ~22-year periodicity can also be seen, though it is not as straightforward as the obvious ~22-year periodic behavior revealed by the method currently proposed. In addition to these, we note that the phase difference apparently correlates with the instantaneous amplitude. On the other hand, however, we cannot see any obvious association of the instantaneous frequency and the instantaneous amplitude. We conclude by briefly discussing the current status of development of an algorithm for the solar activity forecast based on the method presented, as this work is a part of that larger project.