• Earthquakes and Structures
• /
• v.11 no.1
• /
• pp.1-23
• /
• 2016

Numerous buildings have been damaged or destroyed in previous earthquakes by developing soft storey. Almost all the seismic codes have provisions to prevent soft storey in structures, most of them have recommended the ratio of stiffness between adjacent storeys, but none of them has proposed the method to calculate the storey stiffness. On the other hand a great number of previous researches on stiffness have been focused on approximate methods and accurate methods by using analytical softwares have been almost neglected. In this study, six accurate methods for calculating the storey stiffness have been studied on 246 two-bay reinforced concrete frames. It is shown with the results of the statistical study and structural analysis that method 3 in which there is no modification of the original model and the forces with triangular distribution similar to seismic forces are applied to the center of mass of all storeys has acceptable accuracy and desirable efficiency for designing and controlling structures.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.411-415
• /
• 2009

There are some definitions of cloud computing but it can be defined as utilization of personal computers, servers and softwares in one cluster for approaches to the use of shared computing resources. Nowadays the applications of cloud computing are rapidly increasing because of its merits on economic aspect, connectivity convenience, storage space and so on. The main objective of this paper is to find an effective methodology as an initial stage for applications of cloud computing in a real life. Therefore this paper addresses worldwide reviews on cloud computing.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.935-946
• /
• 2014

This paper investigates the noise transmission performance of industrial mufflers widely used in ships based on the CAE modeling and simulation. Since the industrial mufflers have very complicated internal structures, the conventional Transfer Matrix Method (TMM) is of limited use. The CAE modeling and simulation is therefore required to incorporate commercial softwares: CATIA for geometry modeling, MSC/PATRAN for FE meshing and LMS/SYSNOISE for analysis. Main sources of difficulties in this study are led by complicated arrangement of reactive elements, perforated walls and absorption materials. The reactive elements and absorbent materials are modeled by applying boundary conditions given by impedance. The perforated walls are modeled by applying the transfer impedance on the duplicated node mesh. The CAE approach presented in this paper is verified by comparing with the theoretical solution of a concentric-tube resonator and is applied for industrial mufflers.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.51
• /
• pp.221-230
• /
• 1999

Many enterprises are performing the production planning computerization for survival in unlimited competing period. But it is very difficult to directly apply many production planning softwares to the domain-specific areas of many small enterprises because one enterprise is different from the others with respect to product type, production process, and order fulfillment method. Practically most small enterprises depend on experienced production managers in production planning, so then many problems such as overtime work and cost have been appeared. The purpose of this study is to develop production planning module for order-made production system in order to reduce overtime works and surplus costs. We developed production planning module with RDBMS, which is fit for small manufacturing company. Developing this software, we use Visual Basic 5.0 to provide GUI environment for the production planning module and Microsoft Access 97 is used to construct Database. This production planning module is applied to enhancement of productivity in M manufacturing company located in Asan.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.1
• /
• pp.125-134
• /
• 2006

QFD(Quality Function Deployment) is a system for translating specific customer needs into detailed product requirements which are deployed throughout design, production, marketing and support operations. QFD is a team tool. However, most of commercial QFD softwares are standalone and therefore offer limited support for teamwork. In this paper, we developed a web-based QFD software to overcome many of the limitations that standalone systems suffer from. That is, this software was developed for synchronizing collaboration between team members distributed not only geographically but also over time. This software was developed by using Visual studio.NET and Microsoft COM+(CBD) technique and can be implemented on the web browser.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.177-183
• /
• 2009

This paper deals with the topical problems of the Life Cycle Costs in connection with the rolling stocks. the LCC philosophy has already entered the third decade. this philosophy contributed towards the new relationship's comprehension between railway vehicle producers' and railway vehicle users' sphere. this leads together to the technical-economical solution convenient for the both sides. In the point of manufacturer, It is said that low operational costs could be reached using a well-designed and structured maintenance program. this is due to the proper technical analysis of critical components that leads to low costs of maintenance and a superior reliability without increasing the capital investment. but, This paper presents both topical experiences with the LCC models for the railways vehicles and also procedures during Life Cycle Costs calculations. In conclusion I want to introduce how to calculate LCC & what kinds of softwares are used based on VVVF EMU vehicle

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.4
• /
• pp.161-165
• /
• 2000

In the past, the mutual saving finance service was managed by the Packages which consisted of the softwares managing data under the text mode environment. The data was mostly managed at only one place. So it becomes very important things that we efficiently deal various services and systematically support public-relation activities and efficient managements of a security mortgage. Therefor. we develope the system which efficiently manages customer service and management of a security mortgage by using GIS under the Client/server environment.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.262-265
• /
• 2007

Cooling circuit of injection mold affects part quality and cycle time of injection molding process. Examination on mold cooling circuit is usually omitted in part design stage because cooling circuit is designed in the mold design stage. It is desirable to examine mold cooling circuit with respect to part quality in the part design stage. In order to make the examination process convenient and fast, cooling circuit design should be automated without intervention of skilled designer. In this study, optimization of cooling circuit design is automated with commercial softwares; Visual DOC and Moldflow MPI. Effect of initial value for optimization is examined for the optimization result.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.2 s.16
• /
• pp.109-116
• /
• 2000

GeoNet is java-based remotely sensed image processing system. It is based on java Ibject-oriented paradigm and features cross-platform, web-based execution and extensibility to client/server remotely sensed image processing model. Remotely sensed image processing softwares made by java programming language can suggest alternatives to meet readily demand on remotely sensed image processing in proportion to increasement of remotely sensed data.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.05
• /
• pp.120-122
• /
• 1993

This paper describes an improved FES system to restore paralyzed extremities in spinal cord injury patients. For composing stimulus pattern which is suitable for each muscle, electrical stimulus pattern creating system is also developed by using IBM-PC. In the improved portable FES system using V40 microprocessor, muscle fatigue can be decreased by selecting the stimulus frequency which is proper to the response characteristics of each muscle. Driving softwares for the portable FES system and the stimulus pattern creating system are programmed with assembler and C language. A multichnnel portable FES system is designed to minimize the sire and weight using a D/A converter and 32 channel multiplexer.