• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.2 no.2
• /
• pp.112-118
• /
• 1990

Characteristics of heat transfer in a smooth and finned tube located vertically in atmospheric fluidized bed combustor which uses low grade anthracite coals was studied. Experiments to investigate the characteristics of heat transfer between smooth and finned tube are carried out and the results depend on particle size, fluidizing air velocity and bed temperature are summarized. It is found that heat transfer coefficient of the smooth and finned tube increases with decrease in particle diameter and increase in bed temperature. Furthermore, it is noted that heat transfer coefficient increase at the first with increase in the velocity of fluidizing air and tends to decrease at a certain fluidizing air velocity. The increase of heat transfer coefficient for the finned tube is appeared to be increased in 30% compared to that for the smooth tube.

• Carbon letters
• /
• v.10 no.2
• /
• pp.97-100
• /
• 2009

In this work, effects of carbon matrix on sliding friction and wear behavior of four kinds of C/C have been investigated against 40 Cr steel ring mate. Composite A with rough lamination carbon matrix (RL) shows the highest volume loss and coefficient of friction, while composite D with smooth lamination/resin carbon matrix (SL/RC) shows the lowest volume loss. The worn surface of composite A appears smooth, whereas that of composite C with smooth lamination carbon (SL) appears rough. The worn surface of composite D appears smooth under low load but rough under high load. Atomic force microscope images show that the size of wear particles on the worn surface is also dependent on the carbon matrix.

• Journal of the Korean Mathematical Society
• /
• v.49 no.1
• /
• pp.17-30
• /
• 2012

Let D be an arbitrary domain in $\mathbb{C}^n$, n > 1, and $M{\subset}{\partial}D$ be an open piece of the boundary. Suppose that M is connected and ${\partial}D$ is smooth real-analytic of finite type (in the sense of D'Angelo) in a neighborhood of $\bar{M}$. Let f : $D{\rightarrow}\mathbb{C}^n$ be a holomorphic correspondence such that the cluster set $cl_f$(M) is contained in a smooth closed real-algebraic hypersurface M' in $\mathbb{C}^n$ of finite type. It is shown that if f extends continuously to some open peace of M, then f extends as a holomorphic correspondence across M. As an application, we prove that any proper holomorphic correspondence from a bounded domain D in $\mathbb{C}^n$ with smooth real-analytic boundary onto a bounded domain D' in $\mathbb{C}^n$ with smooth real-algebraic boundary extends as a holomorphic correspondence to a neighborhood of $\bar{D}$.

• Journal of Mechanical Science and Technology
• /
• v.14 no.5
• /
• pp.508-517
• /
• 2000

For shift quality improvement, torque sensors are currently too expensive to be used on production vehicles. To achieve smooth acceleration shift, the reference trajectory of the clutch slip speed for accomplishing the shift process within a designated shift completion time and its relationship with the clutch actuating torque were suggested by Jeong and Lee (1999). In order to facilitate the proposed algorithm, nonlinear estimators for necessary information such as the axle shaft torque, clutch friction and turbine torque were designed using only speed sensors. Accounting for the modeling error, a control law for this indirect smooth shift was proposed based on the above mentioned suggestions. Simulation results of the proposed estimators and shift controller were presented and further considerations for practical applications are discussed.

• Journal of Mechanical Science and Technology
• /
• v.14 no.5
• /
• pp.537-546
• /
• 2000

The heat transfer characteristics of refrigerant-oil mixture for horizontal in-tube evaporator have been investigated experimentally. A smooth copper tube and a micro-fin tube with nominal 9.5 mm outer diameter and 1500 mm length were tested. For the pure refrigerant flow, the dependence of the axial heat transfer coefficient on quality was weak in the smooth tube, but in the micro-fin tube, the coefficients were 3 to 10 times greater as quality increases. Oil addition to pure refrigerant in the smooth tube altered the flow pattern dramatically at low mass fluxes, with a resultant enhancement of the wetting area by vigorous foaming. The heat transfer coefficients of the mixture for low and medium qualities were increased at low mass fluxes. In the micro-fin tube, however, the addition of oil deteriorates the local heat transfer performance for most of the quality range, except for low quality. The micro-fin tube consequently loses its advantage of high heat transfer performance for an oil fraction of 5%. Results are presented as plots of local heat transfer coefficient versus quality.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.4
• /
• pp.140-147
• /
• 2008

This paper represents an ultra precision rotational device where the smooth impact drive mechanism (SIDM) is utilized as driving mechanism. Linear motions of piezoelectric elements are converted to the rotational motion of disk by frictional forces generated between the rotational disk and the friction part that is attached to the piezoelectric element. This device was designed to drive the rotational disk using slip-slip motion mechanism instead of stick-slip motion mechanism occurred in conventional impact drive mechanism. Experimental results show that the angular velocity is increased in proportion to the magnitude and frequency of supplied voltage to piezoelectric element and decreased as the preload is increased. In our device, the smooth rotational motion was obtained when the driving frequency has been reached to 500Hz under the driving voltage of 100V.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.3
• /
• pp.575-591
• /
• 2011

We present a novel active contour-based two-pass approach to extract smooth feature regions from a triangular mesh. In the first pass, an active contour formulated in level-set surfaces is devised to extract feature regions with rough boundaries. In the second pass, the rough boundary curve is smoothed by minimizing internal energy, which is derived from its curvature. The separation of the extraction and smoothing process enables us to extract feature regions with smooth boundaries from a triangular mesh without user's initial model. Furthermore, smooth feature curves can also be obtained by skeletonizing the smooth feature regions. We tested our algorithm on facial models and proved its excellence.

• Asian Journal of Turfgrass Science
• /
• v.12 no.2
• /
• pp.99-106
• /
• 1998

미국내에서 바랭이의 지역적 분포와 각 재배작물에서 잡초로서의 중요성을 자료화하기 위하여 설문조사를 실시하였다. 총 117개의 배포된 설문지중 72개의 설문지가 회수되어 62%의 응답률을 보였다. 미극내의 농, 원예작물 재배지역에는 5종의 바랭이가 분포하는 것으로 보고되었고, 이들은 large, smooth, southern, india 그리고 blanket crabgrass 등이었다. 이들 중 약 50% 이상의 응답자가 large crabgrass를 가장 문제잡초로 인식하고 있었다. 지역적으로 smoth와 large crabgrass는 모든 위도에서 그 우점도가 인정된 반면, southern crabgrass는 우점도가 남부지역에 제한되는 것으로 보고되었다. 바랭이는 다른 작물의 재배지역보다 잔디밭에서 그 문제가 보다 심각한 것으로 보고되었다. 남부지역의 잔디밭에서는 large, southern 그리고 smooth crabgrass의 순서로, 북부지역에서는 smooth crabgrass가 large crabgrass보다 잡초로서의 문제성이 큰 것으로 보고되었다. 대부분의 응답자들은 종내변이성이 smooth와 large crabgrass에는 존재하지 않는 것으로 응답하였으나, southern crabgrass내에는 존재하는 것으로 보고되었다.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.248.1-248.1
• /
• 2002

It has been shown that C2-ceramide (C2), short chain ceramide, plays a role in mediating contraction of cat esophageal smooth muscle cells. We examined the effect of newly synthesized ceramide analogues on the C2-ceramide induced contraction in esophageal smooth muscle cells isolated with collagenase. C2-ceramide produced contraction of smooth muscle cells in a dose dependent manner. (omitted)

• Annual Conference of KIPS
• /
• 2009.04a
• /
• pp.838-841
• /
• 2009

본 논문에서는 DSDV 프로토콜을 사용하여 MN의 이동으로 포워딩이 실패하면 smooth handoff방식을 사용하지 않고 바로 애드 혹 라우팅 기법을 통해 이동 노드를 통해 데이터그램을 전달하도록 하는 실험을 수행하였는데, DSDV 라우팅 프로토콜을 사용한 방식의 경우 핸드오프가 발생하지 않은 경우와 거의 같은 성능을 나타냈으며, MN의 개수에 따라서는 전송지연시간이 증가하나 핸드오프 발생간격에는 거의 무관하며 기존의 방식들에 비해 전송지연시간이 작아짐을 확인할 수 있다. 중계 노드의 이동은 DSDV 라우팅 방식의 가장 큰 문제점이지만 중계 노드의 이동속도가 실제로는 5m/sec이내가 대부분이므로 크게 문제되지는 않는다. 이와 같은 연구 결과를 캠퍼스와 같이 제한된 지역에서 활용할 경우 smooth handoff의 속도 지연에 대한 문제를 줄일 수 있을 것으로 예상된다.