• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.2
• /
• pp.105-109
• /
• 2002

The wet etching characteristics of magnetic materials such as NiFe and CoFe were investigated in terms of etch rate and etch profile by using variouus etching solutions (etchants). Among the various etching solutions, HNO$_3$, HCl, and H$_2$SO$_4$were selected for the etching of magnetic materials and showed distinct results. In the case of NiFe films, faster etch rate were obtained with HNO$_3$solution. When NiFe films ere etched with HCl solution, white etch residues were found on the surface of etched films. From FEAES analysis of these etch residues, they were proved to be by-product from the reaction of NiFe with Cl element. CoFe thin films showed the similar trend to the case of NiFe films. They were etched fast in HNO$_3$ solution while Chl solution represented slow etching. The etch profiles of CoFe films showed smooth etch profile but revealed the partial etching around the patterns in HNO$_3$solution of relatively high concentration. It was observed that the etched surface was clean and smooth, and that white etch residues were also remained on the etched films.

• Archives of Pharmacal Research
• /
• v.13 no.2
• /
• pp.136-141
• /
• 1990

The vasorelaxant effects of KR-30075 in guinea-pig pulmonary, bovine coronary and renal arterial strips contracted by either$K^+$depolarization, phenylephrine, or prostaglandin $F_{2a}$($PGF_{2a}$) were evaluated. KR-30075 was more potent than imazodan as a vasorelaxant against $PGF_{2a}$-induced contractions in bovine coronary and renal arteries, whereas against$K^+$induced contractions KR-30075 was less potent than imazodan in guieapig pulmonary arteries and more potent in bovine coronary arteries. KR-30075 was more potent against contractions induced by phenylephrine or $PGF_{2a}$ than the contractions induced by $K^+$ This profile of activity for KR-30075 was similar to that of imazodan and dissimilar from the calcium entry blocking agent nifedipine. There was no vascular selectivity of KR-30075 between bovine coronary and renal arterial strip preparations. In conclusion, this study shows that KR-30075 represents the vasorelaxant effects on guinea-pig pulmonary, bovine coronary and renal arteries without specific vascular selectivity. The vasorelaxant profile of KR-30075, with different sources of vascular smooth muscle, is unlike that of calcium entry blocking agent and more similar to the profile of the agent that inhibit cyclic nucleotide phosphodiesterase.

• YAKHAK HOEJI
• /
• v.53 no.3
• /
• pp.156-160
• /
• 2009

The present study was undertaken to determine whether transgelin participates in the regulation of vascular smooth muscle contraction and, if so, to investigate the mechanism. By PCR homology cloning, the cDNA sequence of ferret transgelin was determined and phosphorothioate antisense and random oligonucleotides were synthesized and introduced into strips of ferret aorta by a chemical loading procedure. Treatment of ferret aorta with transgelin antisense oligonucleotides resulted in a significant decrease in protein levels of transgelin to sham- or random sequence-loaded muscles, but no change in the protein levels of actin. Contraction in response to a phorbol ester was significantly decreased in antisense-treated muscles compared to sham- or random sequence-loaded controls. Neither basal intrinsic tone nor the contraction in response to phenylephrine was significantly affected by the antisense treatment. The data indicate that transgelin plays a significant role in the regulation of contraction and suggest that in a tonically active smooth muscle transgelin may function as a signalling protein to facilitate PKC or ERK-dependent signalling rather than thick filament regulation including $Ca^{2+}$ or calmodulin dependent regulation of myosin light chain kinase.

• Journal of Power System Engineering
• /
• v.4 no.1
• /
• pp.26-32
• /
• 2000

Single-phase heat transfer performance and pressure drop for internally grooved tubes with angles were studied. Experiments were carried out in a counter flow heat exchanger with water as a working fluid. Two commercially available internally grooved tubes and smooth tube were tested. The internal diameter of the smooth tube was 16.5mm and the internal diameters of grooved tubes were 15.4mm, 14.9mm, 15.0mm, 16.7mm, respectively. Grooved angles in the tubes were $37^{\circ},\;43^{\circ},\;45^{\circ},\;50^{\circ}$, respectively. An experimental device to measure the friction factor and heat transfer coefficient was constructed. The experimental results were obtained for the fully developed turbulent flow of water in tube on the condition of uniform heat flux. As the increase of flow rate, Reynolds number, numbers of groove and grooved angle led to the increase of pressure drop. Also this paper showed that heat transfer rate increased with increasing numbers of groove and grooved angle. An empirical relation taken from this study represented most of the data within ${\pm}25%$.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2E
• /
• pp.37-42
• /
• 1995

The polar parabolic equation method (Polar PE) which introduces a series of "cascaded" boundary fitting coordinates into the parabolic equation method has been verified as a good numerical method for atmospheric sound propagation over a curved surface and hills. Polar PE is applied here to underwater sound propagation over a sea mountain assuming locally reacting boundary sea bottom and pressure release water surface for the boundary conditions. Calculations are presented for underwater propagation over a 450 m high sea mountain. Feasibility of Polar PE application for underwater sound propagation over a smooth mountain is discussed.

• Solar Energy
• /
• v.15 no.3
• /
• pp.91-103
• /
• 1995

Non-gray radiation with convection in the entrance region of a smooth tube is numerically investigated. The fluid is a mixture of carbon dioxide, water vapor, and nitrogen to simulate combustion products of propane. The flow is assumed to be laminar and hydrodynamically and thermally developing. The P-1 approximation is used to simplify the radiative transfer equation and the exponential wide band model is adapted to model the spectral absorption coefficients of non-gray gas mixture. The bulk mean temperature and Nusselt number variation along the tube axis are shown for several inlet and wall temperature pairs to show the effect of temperature on the heat transfer characteristics. Nusselt numbers for simultaneously developing flow are compared to those for thermally developing flow. In addition, the effect of the mole fraction of the non-gray gases on convective and radiative Nusselt numbers is investigated.

• Journal of Veterinary Clinics
• /
• v.17 no.2
• /
• pp.495-498
• /
• 2000

Leiomyosarcoma is defined as a malignant smooth muscle tumor or a tumor that arises from smooth muscle and it is found as firm. white and lobulated mass. Canine uterine Ieiomyosa- rcomas are rarely associated with clinical signs. We surveyed(one case which was treated at veter- inary medical leaching hospital of Seoul National University. Through this report we studied the meshed fur diagnosis of uterine leiomyosarcoma by symptom, hematological method and ultrahonog- raphy. To determine uterine leiomysarcoma is difficult due to similarity of clinical signs to pyometra. Especially symptoms could not be noticed even by dogs owners until dogs have an elevation of the number of white blood cells. We conclude ultrasonographic observation and experimental laparotomy are of great value to diagnose the uterine liomyosarcoma.

• Proceedings of the KWS Conference
• /
• 1996.10a
• /
• pp.3-15
• /
• 1996

The formation of a thicker hard alloyed layer have been investigated on the surface of aluminum cast alloy (AC2B) by PTA overlaying process with Cr, Cu and Ni motel powders under the condition of overlaying current 125-200A. overlaying speed 150 mm/min and different powder feeding rate 5-20 g/min. In addition the characteristics of hardening and wear resistance of alloyed layer here been examined in relation to the microstructure of alloyed layer. Main results obtained were summarized as follows: 1) There was an optimum overlaying condition to get a good alloyed layer with smooth surface. This good layer became easy to be formed as increasing overlaying current and decreasing powder feeding rate under a constant overlaying speed. 2) Cu powder was the most superior one in metal powders used due to a wide optimum overlaying condition range, uniform hardness distribution of Hv250-350, good oar resistance and freedom from cracking in alloyed layer with fine hyper-eutectic structure. 3) On the contrary, irregular hardness distribution was usually obtained in Cr ar Ni alloyed layers of which hardness was increased as Cr or Ni contents and reached to maximum hardness of about Hv400-850 at about 60wt%cr or 40wt%Ni in alloyed layer. 4) Cracking occurred in Cr or Ni alloyed layers with higher hardness than Hv250-300 at mere than 20-25wt% of Cr or Ni contents in alloyed layer. Porosity was observed in all alloyed layers but decreased by usage of spherical powder with smooth surface.

• Korean Journal of Veterinary Research
• /
• v.26 no.2
• /
• pp.195-199
• /
• 1986

The papillary tubercles (PTs) developed on the splenic capsule of normal Landrace pigs were collected and their histological structures were observed with light microscope. The results were summarized as follows : 1. The external features of the PTs were smooth spherical or oval form protruded on the splenic capsules. On cross section of PTs, the shapes were predominantly round or elliptical single follicular form, and were often multifollicular and irregular form in some PTs. 2. The PTs were interposed into the splenic capsule. Therefore the peripheral boundary of PT was consisted of splenic capsular tissue and this tissue was covered with mesothelium, The basal tissues of PT were consisted of thick connective tissue and smooth muscle of splenic capsule, and capsular foramen for transport tract between splenic parenchyma and the PT was found at the center of the basal boundary of PT. 3. The basal region of PT was composed of parenchyma and this tissue was the splenic red pulp but the central and peripheral regions of PT contained much more erythrocytes than in the splenic parenchymae. 4. The splenic parenchymae adjoining to PT contained more erythrocytes than in other splenic parenchymal regions and parallel fixed cells directed to the capsular foramen.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.554-570
• /
• 1990

he rolling contact behaviors between a smooth ball and a flat rough surface under dynamic load are intricately affected by many factors, such as the diameter of a ball, normal load and the roughness of a flat surface etc. Accordingly, the experimental study is done to find them on the base of elastic hysteresis loss as theoretical approach is very difficult. The experimental apparatus composed of damped-free vibration system is used. This paper investigates the damping characteristics on the rolling contact area through rolling friction force and logarithmic decrement versus displacement obtained in accordance with the variations of those factors, and presents a new experimental method to find out contact width using the relations of logarithmic decrement and rolling friction force with displacement.