• 대한가정학회지
• /
• 제33권2호
• /
• pp.151-157
• /
• 1995

This is a study on types of foodservice system, the menu, role of the Dietitian, management of the facilities and utensil through the survey conducted at 105 enterprises located in Seoul industrial foodservices which were evenly divided into three groups ; large size of feeding group, medium size of feeding group, small size of feeding group. The sresults are below, 1. Most institutional foodservice was enterprise under direct management. 2. Selective menu was set for the large size of feeding group than small size of feeding group. At budget making, personal management and purchansing management, the dietition role was not important in the large size of feeding group than in the small size of feeding group. 3. Equipped rate of facilities and utensil were greater volume for the large size of feeding group.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.51-54
• /
• 2002

This study is intended to investigate an influence of the kinds and the maximum size of aggregate on the compressive strength of small size core specimen. According to the results, the compressive strength of standard specimen is large in order of basalt, granite and limestone aggregate, and shows increasing tendency as the maximum size of aggregate grows large. The compressive strength of concrete using basalt aggregate shows similar tendency to granite aggregate, and that of concrete using limestone aggregate decreases slightly, compared with granite aggregate. The reducing ratio of the compressive strength of 25mm core specimen is least when the maximum size of aggregate is 10mm. But the compressive strength of 50 and 100mm core specimen is almost not influenced by the maximum size of aggregate.

• 대한전자공학회논문지SP
• /
• 제46권2호
• /
• pp.78-88
• /
• 2009

본 논문에서는 LDA를 이용한 얼굴 인식에서 발생하는 small sample size 문제를 해결하기 위한 효율적인 방법인 resampling 방법을 제안한다. 기존에는 regularization method를 사용하여 small sample size 문제를 해결하였는데, 이 방법을 사용하면 클래스내 분산행렬의 특이성을 없앨 수 있지만, 클래스내 분산행렬과 상수를 곱하는 과정에서 상수 값을 임의로 정해 주어야 하고, 이 상수 값에 따라 인식률이 개선되지 않을 수 있다는 문제점이 발생한다. 제안된 resampling 방법을 이용하여 학습 데이터의 수를 늘리면, regularization method보다 개선된 인식률을 얻을 수 있고, 또한 경험적으로 상수 값을 지정해 주는 과정을 거치지 않아도 되는 장점이 있다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.453-458
• /
• 2007

The importance of the evaluation and verification of small-size cogeneration system has been emphasized because there is no KS-code related to the small-size cogeneration system. The evaluation method of small-size engine cogeneration system was investigated by the reference of Japan evaluation code, JIS B-8122 and international standard organization, ISO-8528. Evaluation method was introduced such as start-test, rapid-load-up and rapid-load-down, etc. The evaluation method was applied to the 300kW small-size gas engine cogeneration system newly developed. The precise and strict evaluation and verification of the system will help the developing cogeneration system to optimum condition. It will also be a base document of KS-Code.

• 한국지진공학회논문집
• /
• 제20권4호
• /
• pp.191-199
• /
• 2016

Piloti-type building is one of typical vertical atypical buildings. These buildings can fail by weak-story or flexible-story mechanism on the first story. They should be designed by taking into account the special seismic load, but those less than six stories are not required to confirm the seismic performance from structural engineers in Korea. For this reason, small-size pilloti-type RC buildings need to be checked for seismic performance. Based on this background, this study performed nonlinear dynamic analysis using the PERFORM-3D for small-size pilloti-type RC buildings and assessed their seismic performance. Examples are two through four story buildings with and without walls in the first story. The walls and columns in the first story satisfied the target performance in the basic of flexural behavior due to quite a large size and reinforcement. However, wall shear demands exceed shear strength in some buildings. When designed for KBC2009, wall shear strength exceed shear demand in some buildings, but still does not in others. Consequently, wall shear must be carefully checked in both existing and new small-size pilloti-type RC buildings.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1997년도 하계 학술대회 논문집
• /
• pp.141-149
• /
• 1997

Structural characteristic of a rice polisher of small size was analyzed to improve its performance and to utilize such data in developing a rice polisher of large size. Spraying characteristic of nozzles which were used for rice polishing was evaluated by a machine vision system. Internal pressure of the polishing chamber was also measured according to outlet resistance, water spraying, and roller shaft speed. In addition, the performance of the polisher was analyzed based on whiteness and broken ratio according to operating conditions.

• Journal of Korean Dental Science
• /
• 제12권1호
• /
• pp.20-28
• /
• 2019

Purpose: This study was performed to evaluate the effect of voxel size on the accuracy of landmark identification in cone-beam computed tomography (CBCT) images. Materials and Methods: CBCT images were obtained from 15 dry human skulls with two different voxel sizes; 0.39 mm and 0.10 mm. Three midline landmarks and eight bilateral landmarks were identified by 5 examiners and were recorded as three-dimensional coordinates. In order to compare the accuracy of landmark identification between large and small voxel size images, the difference between best estimate (average value of 5 examiners' measurements) and each examiner's value were calculated and compared between the two images. Result: Landmark identification errors showed a high variability according to the landmarks in case of large voxel size images. The small voxel size images showed small errors in all landmarks. The landmark identification errors were smaller for all landmarks in the small voxel size images than in the large voxel size images. Conclusion: The results of the present study indicate that landmark identification errors could be reduced by using smaller voxel size scan in CBCT images.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권11호
• /
• pp.1555-1559
• /
• 2003

The objective of the present study was to explore associations between five microsatellites linked to $Fec^B$ and $FecX^I$ genes and litter size in Small Tail Han sheep. The polymorphisms of five microsatellite loci, OarAE101, BM1329, BMS2508, TGLA54 and TGLA68 were detected in 244 ewes of Small Tail Han sheep. Analysis of association between three microsatellite loci (BMS2508, BM1329 and OarAE101) located in the 10 cM region covering the $Fec^B$ gene (Booroola gene) and litter size in Small Tail Han sheep indicated that BMS2508 had significant effect on litter size in the second parity (p<0.05), but no significant effect on litter size in the first parity (p>0.05), while the other two microsatellite loci had no significant effect on litter size in both the first and the second parity in Small Tail Han sheep (p>0.05). At microsatellite locus BMS2508, least squares means in the second parity of genotypes 101/111 and 99/109 were significantly higher than those of genotypes 99/99, 99/101, 99/111 and 99/115 (p<0.05); least squares mean in the second parity of genotype 101/111 was significantly higher than that of genotypes 109/111 and 111/111 (p<0.05). Results of this study also indicated that two microsatellite loci (TGLA54 and TGLA68) that confined the 28.7 cM region covering the $FecX^I$ gene (Inverdale gene) did not affect litter size in both the first and the second parity in Small Tail Han sheep significantly (p>0.05). The information found in the present study is very important for improving the reproductive performance in sheep breeds by marker assisted selection.

• 한국안전학회지
• /
• 제34권3호
• /
• pp.28-35
• /
• 2019

Dry water is a core-shell structured powder which comprises a very fine water core covered with hydrophobic silica particles. Recently, the dry water has attracted attention as a new type of fire extinguishing agents. However, characteristics of the dry water as a fire extinguishing agent have not been revealed until now. To our best knowledge, this is the first work to uncover effects of particle size of the dry water on the fire extinguishing performance. Pristine dry water, which has heterogeneous particle size distribution, was carefully separated by sieving method into three fractions which were a small size (ca. $110{\mu}m$) fraction, a medium size (ca. $220{\mu}m$) fraction and a large size (ca. $400{\mu}m$) fraction. Microscopic observations confirmed the effective separation of dry water's particle size. In extinguishing tests of wood cribs fire, the medium size dry water showed most excellent fire extinguishing performance, as compared to other dry waters having small (ca. $110{\mu}m$) and large (ca. $400{\mu}m$) particle size. The good performance of the medium size (ca. $220{\mu}m$) dry water may be attributed to the balance between cooling effect of the water core and smothering effect of the silica particles. It is also revealed that small size dry water has poor flowability than large size dry water.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년도 춘계학술발표대회 논문집
• /
• pp.386-392
• /
• 2008

The purpose of this study is to clarify playground types by characteristics of playground environment in child care facilities, to analyze the needs and estimation of users according to playground types. The subjects of this study were care-givers, who assist outdoor play activities of children and manage safety in playground, to estimate adequateness of playground's environment to children's outdoor plays and to report needs. The data were collected by field measurement survey for clarification playground environments in 21 child care facilities and structured-questionnaire for estimation and needs of 181 care-givers in them. The major results showed the following. 1) The playgrounds were clarified to five type according to number of child and size of playground. The five types include A-type as large-scale facility/small-size playground, B-type as small-scale facility/large-size playground, C-type as small-scale facility/small-size playground, D-type as middle-scale facility/large-size playground, and E-type as large-scale facility/large-size playground. 2) The adequateness of playground environment of D-type were estimate higher than others. C-type were estimated lower than other types in size and outdoor play areas organization of playground. 3) The care-givers in D-type and E-type wanted to install various play equipments, but the care-giver in C-type didn't wanted to install play equipment. 4) The various outdoor play areas were needed in D-type.