• Korean Journal of Soil Science and Fertilizer
• /
• v.26 no.2
• /
• pp.127-131
• /
• 1993

A newly developed waste-water treatment system for small scale piggery wastes through a demonstration trial at a farm. The results are summarized as follows. 1. The amount of piggery wastes produced was 10.2kg/head/day, which consisted of 2.8kg solid wastes and $7.41{\ell}$ fluid wastes. 2. The unit BOD discharge from piggery wastes was 207g/head/day, among which 81 percent was originated from solid waste and 19 percent from fluid waste. 3. After the treatment of the waste-water through the system, BOD, total N and total P were lowered by 99, 78, 74 percent, respectively : the BOD, total N and total P in the final effluent were $52mg/{\ell}$, $213mg/{\ell}$ and $28mg/{\ell}$, respectively. 4. The results of the trials suggested that the system could be recommended for the practical use at the farms.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.1
• /
• pp.55-61
• /
• 2013

The recovery of Zr from Zircaloy-4 (Zry-4) cladding hulls using a chlorination method was demonstrated for complete conversion of Zr into $ZrCl_4$. A chlorination reaction was performed by reacting Zry-4 hulls for 8 h under a 70 cc/min $Cl_2$ + 70 cc/min Ar flow at $380^{\circ}C$. The initial weight of the reactant (51.7 g) decreased to 0.49 g after 8 h of operation, which is only 0.95wt% of the initial weight. The weight of the total reaction products was 121.7 g with a high Zr purity of 99.80wt%. Fe and Sn were identified as major (0.18wt%) and minor (0.02wt%) impurities of the reaction products, respectively. It was also shown that Zr exhibited a high recovery ratio of 96.95wt% with a relatively small experimental loss of 2.34wt%. Observation of the reaction residues revealed that the chlorination reaction was dominant along the longitudinal direction, and surface oxide layers remained as reaction residues. The high purity and recovery ratio of Zr proposed the feasibility of the chlorination technique as an effective hull waste treatment method.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.69-76
• /
• 2021

This study is to identify the mineralogical properties of caprock samples from drilling cores of the Pohang basin, which is the research area for the demonstration-scale CO2 storage project in Korea. The interaction of water-rock-gas that can occur due to CO2 injection was identified using geochemical modeling. Results of mineralogical studies, together with petrographic data of caprock and data on the physicochemical parameters of pore water were used for geochemical modeling. Modelling was carried out using the The Geochemist's Workbench 14.0.1 geochemical simulator. Two steps of modeling enabled prediction of immediate changes in the caprocks impacted by the first stage of CO2 injection and the assessment of long-term effects of sequestration. Results of minerlaogical analysis showed that the caprock samples are mainly composed of quartz, K-feldspar, plagioclase and a small amount of pyrite, calcite, kaolinite and montmollonite. After the injection of carbon dioxide, the porosity of the caprock increased due to the dissolution of calcite, and dawsonite and chalcedony were precipitated as a result of the dissolution of albite and k-feldspar. In the second step after the injection was completed, the precipitation of dawsonite and chalcedony occurred as a result of dissolution of calcite and albite, and the pH was increased due to this reaction. Results of these studies are expected to be used as data to quantitatively evaluate the efficiency of mineral trapping capture in long-term storage of carbon dioxide.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.19-29
• /
• 2006

The first Japanese pilot-scale $CO_2$ sequestration project has been undertaken in an onshore saline aquifer, near Nagaoka in Niigata prefecture, and time-lapse well logs were carried out in observation wells to detect the arrival of injected $CO_2$ and to evaluate $CO_2$ saturation in the reservoir. $CO_2$ was injected into a thin permeable zone at the depth of 1110m at a rate of 20-40 tonnes per day. The total amount of injected $CO_2$ was 10400 tonnes, during the injection period from July 2003 to January 2005. The pilot-scale demonstration allowed an improved understanding of the $CO_2$ movement in a porous sandstone reservoir, by conducting time-lapse geophysical well logs at three observation wells. Comparison between neutron well logging before and after the insertion of fibreglass casing in observation well OB-2 showed good agreement within the target formation, and the higher concentration of shale volume in the reservoir results in a bigger difference between the two well logging results. $CO_2$ breakthrough was identified by induction, sonic, and neutron logs. By sonic logging, we confirmed P-wave velocity reduction that agreed fairly well with a laboratory measurement on drilled core samples from the Nagaoka site. We successfully matched the history changes of sonic P-wave velocity and estimated $CO_2$ saturation a(ter breakthrough in two observation wells out of three. The sonic-velocity history matching result suggested that the sweep efficiency was about 40%. Small effects of $CO_2$ saturation on resistivity resulted in small changes in induction logs when the reservoir was partially saturated. We also found that $CO_2$ saturation in the $CO_2$-bearing zone responded to suspension of $CO_2$ injection.

• International Journal of Computer Science & Network Security
• /
• v.24 no.4
• /
• pp.163-169
• /
• 2024

India is a developing nation and has come with comprehensive way in modernizing its reducing poverty, economy and rising living standards for an outsized fragment of its residents. The STEM (Science, Technology, Engineering, and Mathematics) education plays an important role in it. STEM is an educational curriculum that emphasis on the subjects of "science, technology, engineering, and mathematics". In traditional education scenario, these subjects are taught independently, but according to the educational philosophy of STEM that teaches these subjects together in project-based lessons. STEM helps the students in his holistic development. Youth unemployment is the biggest concern due to lack of adequate skills. There is a huge skill gap behind jobless engineers and the question arises how we can prepare engineers for a better tomorrow? Now a day's Industry 4.0 is a new fourth industrial revolution which is an intelligent networking of machines and processes for industry through ICT. It is based upon the usage of cyber-physical systems and Internet of Things (IoT). Industrial revolution does not influence only production but also educational system as well. IoT in academics is a new revolution to the Internet technology, which introduced "Smartness" in the entire IT infrastructure. To improve socio-economic status of the India students must equipped with 21st century digital skills and Universities, colleges must provide individual learning kits to their students which can help them in enhancing their productivity and learning outcomes. The major goal of this paper is to present a low cost, effective learning mechanism for STEM implementation using Raspberry Pi 3+ model (Single board computer) and Node Red open source visual programming tool which is developed by IBM for wiring hardware devices together. These tools are broadly used to provide hands on experience on IoT fundamentals during teaching and learning. This paper elaborates the appropriateness and the practicality of these concepts via an example by implementing a user interface (UI) and Dashboard in Node-RED where dashboard palette is used for demonstration with switch, slider, gauge and Raspberry pi palette is used to connect with GPIO pins present on Raspberry pi board. An LED light is connected with a GPIO pin as an output pin. In this experiment, it is shown that the Node-Red dashboard is accessing on Raspberry pi and via Smartphone as well. In the final step results are shown in an elaborate manner. Conversely, inadequate Programming skills in students are the biggest challenge because without good programming skills there would be no pioneers in engineering, robotics and other areas. Coding plays an important role to increase the level of knowledge on a wide scale and to encourage the interest of students in coding. Today Python language which is Open source and most demanding languages in the industry in order to know data science and algorithms, understanding computer science would not be possible without science, technology, engineering and math. In this paper a small experiment is also done with an LED light via writing source code in python. These tiny experiments are really helpful to encourage the students and give play way to learn these advance technologies. The cost estimation is presented in tabular form for per learning kit provided to the students for Hands on experiments. Some Popular In addition, some Open source tools for experimenting with IoT Technology are described. Students can enrich their knowledge by doing lots of experiments with these freely available software's and this low cost hardware in labs or learning kits provided to them.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.150-169
• /
• 2020

Surveys of Buddhist ruins at Namsan in Gyeongju began in earnest during the Japanese colonial era, undertaken by Japanese scholars. These surveys of Buddhist remains in Namsan made during the colonial period should be seen as previous research which cannot be ignored in any in-depth study of Buddhist ruins in Gyeongju. Full-scale surveys of Buddhist ruins at Namsan began in the 1920s. Previous surveys conducted around the time of the Japanese annexation of Korea in 1910 are generally viewed as only representing preliminary investigations and, thus, have not received much attention. However, these early surveys are significant in that they led to the Buddhist ruins on Namsan becoming widely known in the 1910s and served as the foundations for later studies. The removal of the Seated Medicine Buddha from Samneung Valley in Gyeongju in 1915 and its subsequent exhibition at the Joseon Local Products Expo, which marked the fifth anniversary of the Japanese administration of Korea, was especially important in garnering attention for Namsan's wealth of Buddhist artifacts, as the statue was placed in the main hall of the art museum and attracted a great deal of interest from visitors. It is typically thought that this Seated Medicine Buddha was exhibited in 1915 because it was the most beautiful and well-preserved statue from Namsan. However, the removal of this statue was closely related to the proposed move of the Seokguram statue to Seoul around the time of Korea's annexation. The plan to move Seokguram to Seoul was primarily devised by Terauchi Masatake, and the plan, based on Ilseontongjo-ron ('日鮮同祖論'), a historical theory that prehistoric Korean and Japanese people were of the same blood, and Joseon Jeongcheasoeng-ron ('朝鮮停滯性論'), a historical theory arguing that development had stagnated in Korea, was intended to be a visual demonstration of a new era for Korea. This new era was to proceed under the rule of the Japanese Empire through the dissolution of Gyeongbokgung, the symbol of the Joseon Dynasty, which would be replaced with past glories as symbolized by the statue of Buddha. However, as the plan floundered, the replacement for Seokguram in Seoul ended up being none other than the Seated Medicine Buddha of Samneung Valley. Surveys of the Seated Medicine Buddha began in 1911, administered by Sekino Tadashi, but he likely learned of the statue's location from Moroga Hideo or Kodaira Ryozo, Japanese residents of Gyeongju. It is also probable that these Japanese residents received a request from the Japanese Government General of Korea to find a Buddha statue that was worthy of being displayed at exhibitions. In this way, we can say that the transfer of the Seated Medicine Buddha to Seoul was the result of close cooperation between the Government General, Sekino Tadashi, and Japanese residents of Gyeongju. This also had the effect of removing the magical veil which had shrouded the Buddhist ruins of Namsan. In other words, while the early surveys of Buddhist ruins on Namsan are significant, it is difficult to argue that the surveys were undertaken for purely academic purposes, as they were deeply related to the imperial ambitions of Governor-General Terauchi which encompassed the plans to move Seokguram to Seoul and the successful hosting of the 1915 Expo. It should also be pointed out that the failure of the plan to move Seokguram to Seoul and the preservation of the Seated Stone Buddha of Mireuggok at Namsan was in no small part due to resistance from Korean residents in Gyeongju. Although it is not described in detail in the paper, research is needed which shows that the Korean residents of Gyeongju were not simple bystanders, but agents of history.