• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.434-442
• /
• 2019

도시 내 빈번히 발생하는 홍수 피해를 해결하기 위한 대응 방안으로 자연상태의 수문순환 체계를 회복하기 위한 저영향개발(Low Impact Development, LID) 기법이 대두되고 있다. LID 요소기술 중 하나인 생태저류지는 유역에서 발생하는 유출수를 저류 및 침투하여 우수 유출수 및 비점오염물질 저감효과를 갖는 시설로 다양한 연구가 진행되고 있으나, 유출저감효과에 대한 분석은 미흡한 실정이다. 따라서 본 연구에서는 수문 해석이 가능한 K-LIDM을 이용하여 소규모유역에서 생태저류지의 유출 저감효과를 분석하였다. 시나리오를 구성함에 있어 생태저류지의 저류용량을 증가시키거나 유역과 생태저류지를 분할하였고 확률강우량을 활용하여 단기강우를 모의하였다. 분석결과 저류용량 증가에 따라 20%, 분산형 시스템에서 5~15% 이상의 유출 저감효과를 나타냈으며 향후 생태저류지의 저류깊이, 지반의 침투능 및 유출부의 직경과 높이 등 다양한 시나리오에 대한 연구가 수행된다면 생태저류지의 물순환 효율성에 관하여 보다 정량적인 분석이 가능할 것으로 기대된다.

• 한국항행학회논문지
• /
• 제18권3호
• /
• pp.201-208
• /
• 2014

선박의 다양화와 부두의 제한성으로 인하여 수심이 얕은 수역이나 협소한 부두에 접안 시 소형계류시설 및 부유체를 이용하여 해상 공간을 활용하고 있다. 이를 통하여 다양한 장소에서 접안이 가능하며 나아가 상당한 비용절감 효과를 가질 수 있다. 그러나 소형계류 및 부유체를 활용한 선박의 접안 시 파랑에 의해 부유체와 선박간 충격이 발생할 수 있고 이러한 충격이 대형사고로 발생할 수 있는 위험이 상존함에 따라 계류재 및 부유체의 파랑에 의한 움직임 예측과 분석이 필요하다. 본 연구에서는 계류재 및 부유체 운동해석을 위한 3차원 운동 정보와 가속도를 목포해양대 요트계류시설에서 측정함으로써 거동 특성에 대한 기초 자료를 제공하는 계측시스템을 개발하였고, 이 시스템의 구성 및 원리 등에 대하여 설명하고자 한다.

• 한국환경복원기술학회지
• /
• 제5권4호
• /
• pp.31-38
• /
• 2002

The rate of sewage treatment in South Korea was 68% in the late 1999. Sewage treatment is mostly made near big cities such as Seoul and Busan, and it is little in rural areas. Wastewater from households goes to streams directly without treatment in rural areas and pollutes streams. It is necessary to improve the progress for treatment of nutrients such as N and P which cause eutrophication in streams and lakes, because sewage treatment system in South Korea focuses on treatment of basic organic matters. Therefore it will contribute to improve discharged water quality if small sewage treatment systems by aquatic plants and microbes are introduced to rural areas where are not connected to local sewage treatment facility. This experiment was conducted to find out the best way using aquatic plants and microbes to purify wastewater from households through individual sewage treatment system. Phragmites communis, Iris pseudoacorus, Acorus calamus var. angustatus, Typha orientalis and Oenanthe javanica were used for this experiment. BOD, COD, SS, T-N and T-P were analyzed following standard methods for wastewater. The result shows that wastewater was roughly purified through pebbles and sands, and highly purified through aquatic plants and microbes especially in T-N and T-P. Iris pseudoacorus is the most effective in reduction of COD and BOD level. This system will work even in winter when plants die because microbes will be still working.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.342-343
• /
• 2009

Paper factories use a large amount of water and same amount of wastewater is generated. It is important to purity and recycle the wastewater because of water shortages and water pollution. The existing water treatment facilities like precipitation process need large-scale equipment and wide space to purity the wastewater of paper factory. High gradient magnetic separation (HGMS) system has the merits to purity rapidly because of large voids at filter and to occupy small space. In this paper, two types of superconducting magnets were used for HGMS systems. Cryo-cooled Bi-2223 superconducting magnet system with 70 mm room temperature bore and 200 mm of height was prepared. Cryo-cooled Nb-Ti superconducting magnet with 100 mm room temperature bore and 600 mm of height was used for magnetic separator. Magnetic filters were designed by the analysis of magnetic field distribution at superconducting magnets. The various magnetic seeding reactions were investigated to increase the reactivity of coagulation. The effects of magnetic separation of wastewater were investigated as variation of magnetic field strength and flow rate of wastewater.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.477-482
• /
• 2009

로켓노즐 유동은 성능에 대단히 중요한 영향을 미치나, 고온 고압의 가스 유동 특성으로 직접적인 측정이 매우 어렵다. 이러한 문제 해결을 위해 수력학적 상사(hydraulic analogy)기법이 개발되었으며, 본 연구에서는 고온 고압의 로켓 노즐 유동에 대한 수력학적 상사의 적용 가능성이 시험되었다. 로켓 모타의 축대칭 De Laval 노즐 내부 유동현상에 관한 연구가 수력학적 상사를 이용하여 설계된 2차원 수문형 시험장치(2-D Sluice-Type Water-Table)에서 수행되었다. 정량적인 시험을 위해서는 $k{\neq}2$인 기체 유동에 대한 비상사성 문제 해결이 필요하며, 본 연구에서는 시험대를 경사시켜 유동방향 중력가속도 영향을 감소시킴으로서 점성에 의한 비상사성 문제 해결을 시도하였다. 유동 가시화를 통해 수력학 상사에 대한 이해를 깊이할 수 있었으며, 수력학적 상사 실험(2차원 등엔트로피 유동)의 관련 분야에 대한 다양한 적용 가능성이 확인되었다.

• 한국물환경학회지
• /
• 제25권4호
• /
• pp.522-529
• /
• 2009

To supply safe drinking water to areas lacking in water supply and drainage system, such as rural area and military bases in proximity to Demilitarized Zone, effective method for treating organic contaminants such as MTBE is required. This study focuses on seeking optimal conditions for effective degradation of MTBE using a bath type ultrasound reactor. Effectiveness of MTBE degradation by ultrasound is dependent on the frequency, power, temperature, treatment volume, initial concentration, catalyst, etc. In this study the degradation rate of MTBE by ultrasound was proportional to power/unit volume ratio and removal is relatively more efficient for 0.1 mM than for 1 mM of MTBE solution. Efficiency of ultrasound treatment for 1 mM MTBE solution was enhanced under bath temperature of $30^{\circ}C$ compared to $4^{\circ}C$, but the temperature effect was negligible for 0.1 mM MTBE solution. Also for 0.1 mM MTBE solution, effect of catalyst such as $TiO_2$ and $Fe^0$ on treatment speed was negligible, and zeolite even increases the time taken for the degradation. Under these specific experimental conditions of this study, the most determinant factor for degradation rate of MTBE in solution was frequency and power of ultrasound. The results have shown that a continuous ultrasound reactor system can be used for small scale remediation of organically polluted groundwater, under optimal conditions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.4-4
• /
• 2009

Paper factories use a large amount of water and same amount of wastewater is generated. It is important to recycle the wastewater because of water shortages and water pollution. The existing water treatment facilities like precipitation process need large-scale equipment and wide space to purify the wastewater of paper factory. High gradient magnetic separation (HGMS) system has the merits to purify rapidly because of large voids at filter and to occupy small space. In this paper, two types of superconducting magnets were used for HGMS systems. Cryo-cooled Bi-2223 superconducting magnet system with 70 mm room temperature bore and 200 mm of height was prepared. Cryo-cooled Nb-Ti superconducting magnet with 100 mm room temperature bore and 600 mm of height was used for magnetic separator. Magnetic filters were designed by the analysis of magnetic field distribution at superconducting magnets. The various magnetic seeding reactions were investigated to increase the reactivity of coagulation. The effects of magnetic separation of wastewater were investigated as variation of magnetic field strength and flow rate of wastewater.

• 해양환경안전학회지
• /
• 제13권2호
• /
• pp.127-132
• /
• 2007

본 연구는 제한된 예산에서 최대의 효율을 얻기 위해서 여러 대안 중에서 최적의 상수원 확보 방안을 결정하는 것이다. 상수원 할당 문제를 다루기 위해서는 해수 담수화 시설, 지하수 개발, 저수지개발, 해저관로 설치, 급수선, 해상 상수원 비축기지와 같은 제안된 여러 대안들이 있다. 본 논문에서는 가장 합리적인 대안을 결정하기 위하여 새로운 모델인 0-1정수계획모형이 제안된다. 제안된 모형은 지금까지 최적 상수원 확보 문제에 적용된 사례가 없다. 본 논문은 최소의 예산으로 가장 합리적인 대안을 결정하는데 기여할 뿐만 아니라 제안된 모형은 타 지역의 상수원 확보 문제에도 적용할 수 있다.

• 상하수도학회지
• /
• 제25권1호
• /
• pp.95-106
• /
• 2011

Even though MBR processes have many advantages such as high quality effluents, a small footprint and convenience for operation compared to conventional activated sludge processes, there are some shortcomings in terms of the cost and potential fouling incident that keeps MBR (Membrane bioreactor) processes from being widely applied. To reduce these problems, PTFE (Polytetrafluoroethylene) flat sheet membranes that have excellent permeability and durability were tested instead of PVDF (Polyvinylidene fluoride) membrane which is being used widely in water treatment. Low concentration of sodium hydroxide (NaOH) was also added into the membrane modules in order to prevent the membrane fouling as well as to provide the alkalinity. With conditions mentioned above, a pilot-scale MBR system based on the MLE (Modified Ludzack Ettinger) process was operated at flux of 40 $L/m^{2}/hr$ and over 15,000 mg/L MLSS concentration for about 8 months. And coagulant(alum) was added into the membrane tank to remove phosphorus. Although the more coagulant is added the more effectively phosphorus is removed, that can lead to fouling for a long operation(Ronseca et al.,2009). By the way there is a research that fouling grow up after stopping injection of coagulant(Holbrook, 2004). Stable operation of MBR systems was achieved without major chemical cleaning and the effluent quality was found to be good enough to comply with the treated waste water quality regulations of the Korea.

• 한국물환경학회지
• /
• 제20권1호
• /
• pp.86-92
• /
• 2004

Lab-scale experiments have been carried out to investigate ammonia stripping with a modified spray tower for removing ammonia nitrogen from swine wastewater. The operating conditions such as initial pH, temperature, air flow, hole size of distributor determining the diameter of water drops, and influent solids concentration were closely examined focusing on removal efficiency of ammonia. As a result of the experiment, in order to achieve high rate of ammonia removal by the air stripping system, the air flow rate must be supplied at high rate with sufficiently high initial pH, temperature. The optimum operating condition to meet the residual ammonia concentration of 300 mg/L was the initial pH of 11.0 at $35^{\circ}C$ with the air flow rate of 20 L/min. It also showed that the smaller hole size is, the higher removal rate of ammonia is expected. However, when used a small sized distributor (2 mm), the flooding problem at the upper column occurred due to clogging of the hole. With regard to the influent solids concentration, it was showed that the lower concentration of solids, the higher removal rate of ammonia. The removal of particulate materials in influent led to improve the removal efficiency of ammonia, rather than to control the operating condition including initial pH, temperature, and air flow. The empirical correlation between KLa and operating parameters would be driven as, $K_{La}=(0.0003T-0.0047){\cdot}G^{0.3926}{\cdot}L^{-0.5169}{\cdot}C^{-0. 1849}$. The calculated $K_{La}$ from proposed formula can be used effectively to estimate the optimum reaction time and to calculate the volume of modified spray tower system.