• 한국전자거래학회지
• /
• 제23권1호
• /
• pp.89-102
• /
• 2018

최근 4차 산업혁명의 도래로 인해 융합서비스 환경으로 변화함에 따라 융 복합적인 새로운 보안위협이 나타나고 있다. 이에 중소형 의료기관 또한 비즈니스 환경을 고려한 특화된 보안을 필요로 하고 있는 실정이다. 따라서 본 논문에서는 선행연구 분석을 통해 의료기관 보안 특성을 도출하고 중소형 의료기관의 현장조사를 통해 중소형 의료기관 보안 특성과 현황을 조사하였다. 이러한 중소형 의료기관 보안 특성을 기반으로 중소형 의료기관을 위한 보안관리 평가모형을 설계하고 검증하였다. 설계를 위해 현존하는 의료기관 관련 보안관리체계, 평가 인증 체계 비교분석을 수행하였고 본 논문에서 제안한 보안관리 평가 모형과 공유정도 또한 확인하였다. 또한 제안하는 중소형 의료기관을 위한 보안관리 평가모형의 통계적 검증을 위해 적합 타당성 검증을 수행하였고, AHP 분석을 통한 상대적 우선순위 분석을 수행하여 항목별 가중치를 도출하였다. 본 연구의 결과를 통해 중소형 의료기관이 실제 수행 가능한 보안관리 평가모형의 기준으로 활용될 수 있을 것으로 기대된다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.472-473
• /
• 2006

Maghemite and hematite nanospheres were synthesized by using the Sol-gel technique. The structural properties of these nanosphere powders were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), and pore size distribution. Hematite phase shows crystalline structures. The mean particle size that resulted from BET and XRD analyses were 4.9 nm and 2 nm. It can be seen from transmission electron microscopy that the size of the particles are very small which is in good agreement with the FESEM and the X-ray diffraction. The BET and pore size method were employed for specific surface area determination.

• 대한방사선기술학회지:방사선기술과학
• /
• 제33권1호
• /
• pp.61-66
• /
• 2010

선형가속기를 기반으로 하는 뇌정위적 방사선 수술에 있어 전용 콘과 동일한 정방형 조사면에서의 소조사면 선량특성에 관해 알아보고자 6 MV 광자선과 소조사면 전용 검출기를 이용해 측정하였다. 선원 표면간 거리는 100 cm로 하고, 전용 cone ${\Phi}1\;cm$, ${\Phi}2\;cm$, ${\Phi}3\;cm$과 정방형 조사면 $1{\times}1\;cm^2$, $2{\times}2\;cm^2$, $3{\times}3\;cm^2$ 조사면 으로 1.5 cm, 5 cm, 10 cm, 20 cm, 30 cm 지점에서 심부선량을 측정하였고, 최대 선량점에서 각 조사면에서 출력선량을 측정하여 비교하였다. 반음영의 측정을 위한 선량측면도 측정은 ${\Phi}1\;cm$, ${\Phi}3\;cm$ 및 동일한 정방형 조사면에서 선원 표면간 거리 95 cm, 깊이 5 cm에서 SFD를 이용하여 측정하였다. 물리학적 조사면(90%) 내에서는 1 mm 간격으로, 반음영 영역(20~80%)에서는 0.5 mm 간격으로 측정하였다. 전용 콘 과 정방향 조사면의 PDD 변화는 기준조사면을 기준으로 5 cm 깊이에서 4.3~7.9% 낮게 나타났으며, 콘의 크기와 조사면 크기가 커질수록 PDD 변화는 적게 나타났다. 선질 비교를 위해 $PDD_{20,10}$를 비교한 결과 ${\Phi}1\;cm$ 콘과 $1{\times}1\;cm^2$을 제외한 다른 조사면에서는 1% 이내의 변화를 보였다. 출력선량은 콘을 이용한 방법에서 정방형 조사면에서 보다 3.1~4.6% 출력선량이 증가하였다. 반음영 영역은 ${\Phi}1\;cm$, ${\Phi}3\;cm$ 동일한 정방형 조사면에서 콘을 이용한 방법이 반음영 영역이 20% 감소하였다. 뇌정위적 방사선 수술은 소조사면을 이용해 1회 대선량을 조사하는 방법으로 조사면의 선량특성을 고려한 처방이 중요하게 된다. 본 실험을 통해 뇌정위적 방사선 수술에 있어 정방형 소조사면 보다 전용 콘을 이용한 방법이 유효하다고 사료되며, 향후 다양한 측정기를 이용한 소조사면의 선량특성에 관한 연구가 필요하다고 생각된다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년도 추계학술발표대회 논문집
• /
• pp.11-16
• /
• 2009

Public rental apartment has suffered social exclusion problem, stemmed from its closed planing for a very specific range of the disadvantaged population. Thereby, it has been recognized as a disliked residential facility. To alleviate this problem, various approaches have been tried such as ownership-tenant mixture, and different unit size mixture. The purpose of this study is to grasp the expected social relation among neighboring residents according to socially integrative planing elements such as ownership, unit size and family life cycle match. Thirty eight graduate students in architecture and housing field responded to the questionnaire which was specifically made to identify relations of 28 neighboring situations based on $2{\times}2{\times}2$ variable composition. Frequency, percentage and MDS(multidimensional scaling) were used to analyze data. As a result, the order of preferred matchy were identified. The match between rental/small/children group and ownership/middle/children group was turned out to be the most desirable while the match between rental/small/children family group and rental/small/elderly group was found the least desirable. Spatial representations of the relationships among 8 household types were delineated. In conclusion, the definite patterns of the favorable and unfavorable match were found. This result is expected to be used as a reference in developing a strategic match to promote the rental apartments social integration in Korea.

• 융합정보논문지
• /
• 제9권1호
• /
• pp.136-141
• /
• 2019

본 논문은 Cortex-M4 기반 소형 데이터수집, 융합 및 고속 전송시스템 대해서 기술하였다. 본 논문에서 설계한 데이터 수집 및 전송 시스템은 산업현장에서 발생되는 각종 데이터를 실시간 수집하여 서버 컴퓨터로 직접 자료를 전송할 수 있으며 간단한 필드-프레임을 개발해서 데이터 전송 속도를 향상 시켰다. 또한 각종 센서에서 수집된 여러종류의 데이터를 데이터 수집장치로 쉽게 전달할 수 있도록 디지털 신호 입력부와 아나로그 신호 입력부, 디지털 신호 출력부와 아나로그 신호 출력부가 별도로 구성되도록 설계하였다. 이러한 소형 데이터수집 시스템은 실시간으로 각종 데이터의 수집 및 고속 데이터 전송이 실시되어 산업현장에서 정밀한 제품들의 품질향상에 크게 기여하리라 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.433-433
• /
• 2016

Carbon nanotubes (CNT) emitter has widely become an attractive mechanism that draws growing interests for cold cathode field emission. CNT yarns have demonstrated its potential as excellent field emitters. It was demonstrated that a small focal spot size was achieved by manipulating some electrical parameters, such as applied bias voltage at the mesh gate, and electrostatic focal lenses, geometrical parameters, such as axial distances of the anode, and the electrostatic focal lens from the cathode assembly, and the dimension of the opening of the electrostatic lens. Electrical-optics software was used to systematically investigate the behavior of the electron beam trajectory when the aforementioned variables were manipulated. The results of the experiment agree with the theoretical simulation results. Each variable has an individual effect on the electron beam focal spot size impinging on the target anode. An optimum condition of the parameters was obtained producing good quality of X-ray images. Also, MWCNT yarn was investigated for field emission characteristics and its contribution in the X-ray generation. The dry spinning method was used to fabricate MWCNT yarn from super MWCNTs, which was fabricated by MW-PECVD. The MWCNT yarn has a significant field emission capability in both diode and the triode X-ray generation structure compared to a MWCNT. The low-voltage-field emission of the MWCNT yarn can be attributed to the field enhancing effect of the yarn due to its shape and the contribution of the high-aspect-ratio nanotubes that protrude from the sides of the yarn. Observations of the use of filters on the development of X-ray images were also demonstrated. The amount of exposure time of the samples to the X-ray was also manipulated. The MWCNT yarn can be a good candidate for use in the low voltage field emission application of X-ray imaging.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.922-924
• /
• 1992

This paper presents a CAE(Computer Aided Engineering)system for solving electrostatic field problems by means of a small size computer such as a personal computer. The system software operated on the personal computer is composed of a CAD(Computer aided Design), electric field analysis by using FEM(Finite Element Method)and DB(Data Base)of insulating materials. In addition, we discuss an application of the system to analyzing electric field such as parallel plate electrodes with an insulation spacer, which result suggests that the visualization of electric field distribution and tolerance for insulation strength enables us to assure a simplified evaluation of the insulating design.

• 한국농공학회논문집
• /
• 제54권1호
• /
• pp.39-45
• /
• 2012

In this study, field test on utilization of recycled aggregates and crushed stone as horizontal drains to use an alternative material of sand in soft ground is practiced. The settlement with time showed similarly ranged from 28.4-30.3 cm in the all horizontal materials. The excess pore water pressure of the recycled aggregates and crushed stone showed smaller than sand. The small the excess pore water pressure becomes faster the consolidation period and it can reduces the amount of residual settlement. Therefore, it was verified as having enough to an alternative materials that the field applicability is excellent. The distribution of earth pressure with time showed similarly in the all horizontal materials. The recycled aggregates and crushed stone was very applicable to practice because there is no mat resistance in the horizontal drains layer. The penetration rate in the SCP and PVD improvement sections did not show large differences as the grain size and the horizontal drainage height increases.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.47-52
• /
• 2012

The use of a $Ti:LiNbO_3$ symmetric Mach-Zehnder interferometric intensity modulator with a push-pull lumped electrode and a plate-type probe antenna to measure an electric field strength is described. The modulator has a small device size of $46{\times}7{\times}1mm$ and operates at a wavelength of $1.3{\mu}m$. The output characteristic of the interferometer shows the modulation depth of 100% and 75%, and $V_{\pi}$ voltage of 6.6 V, and 6.6 V at the 200 Hz and 1 KHz, respectively. The minimum detectable electric field is ~1.84 V/m, ~3.28 V/m, and ~11.6 V/m, corresponding to a dynamic range of about ~22 dB, ~17 dB, and ~6 dB at frequencies of 500 KHz, 1 MHz and 5 MHz, respectively.

• 한국정밀공학회지
• /
• 제22권2호
• /
• pp.120-125
• /
• 2005

Effect of transverse electric fields on fracture behavior in ferroelectric ceramics under purely electrical loading is investigated. It is shown that the shape and size of the domain switching zone depend strongly on the ratio of the transverse electric field to the coercive electric field as well as the direction of the applied electric field. Under small-scale conditions, the crack-tip mode I and II stress intensity factors induced by ferroelectric domain switching are numerically obtained. The crack kinking in ferroelectric ceramics is also discussed.