• 터널과지하공간
• /
• 제23권2호
• /
• pp.99-109
• /
• 2013

노천광산사면은 일반적으로 경제성 문제로 지보대책을 고려하지 않고 설계된다. 그러나 최종 잔벽사면은 장기적인 안정성이 필요하므로 경우에 따라서는 안정성을 높일 수 있는 적절한 대책이 필요하다. 본 연구를 위해 S 석회석 광산의 지질 및 불연속면 조사, 암반평가, 강도시험 등 현장조사를 수행하였다. 그리고 최종 잔벽사면에 대해 평사투영, SMR, 수치해석을 통한 안정성 평가를 실시하고, 최종 잔벽사면의 처리방안을 제안하였다. 해석결과, 사면 전체규모에서 파괴는 예상되지 않지만, 벤치규모의 사면파괴는 발생할 가능성이 있다. 최종 잔벽사면은 프리스플리팅 발파로 정리하고, 중간 소단에 폭이 넓은 berm을 설치하거나 국부적으로 지하수 유출이 있는 곳에는 수평배수공 등을 시공하여 벤치사면의 안정성을 높일 수 있을 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.193-200
• /
• 2000

Numerical analysis of slope stability is presented using slice method, static seismic analysis methods, and earthquake response analysis methods. Static seismic force is considered as 0.2g while vertical static seismic force is not considered in analysis. For earthquake response analysis, Hachinohe-wave is applied. Safety factor calculated using slice method for failure surface. Calculating methods are Bishop's method and Janhu's method. Static seismic analysis was applied using Mhor-Coulomb model and earthquake response analysis was applied using non-linear elastic model.

• 지질공학
• /
• 제21권1호
• /
• pp.25-34
• /
• 2011

본 연구에서는 도로시공을 위한 사면절개시 발생된 산사태 현장을 대상으로 강우시 침투를 고려한 사면안정해석 방법을 적용하였다. 강우시 침투를 고려한 사면안정해석법은 크게 세가지로 구분할 수 있다. 첫 번째는 지반내 습윤전선이 하강을 고려하여 해석하는 방법, 두 번째는 지반내 지하수위의 상승을 고려하여 해석하는 방법, 그리고 세 번째는 지반내 습윤전선 하강 및 지하수위 상승을 고려하여 해석하는 방법이다. Bishop의 간편법을 이용하여 해석한 결과, 강우시 습윤전선 하강으로 인한 사면안전율 감소가 지하수위 상승으로 인한 사면안전율 감소보다 빠르게 진행됨을 알 수 있다. 또한, 습윤전선 하강 및 지하수위 상승이 동시에 일어날 경우 사면안전율은 매우 급속하게 감소함을 알 수 있다. 따라서, 강우시 사면안정해석법은 지반내 지하수위 상승과 습윤전선 하강을 동시에 고려하여 해석하는 것이 보다 바람직하다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.711-719
• /
• 2006

In this study, a 3D laser scanner is applied to evaluate of the stability of rock slope and to establish a adequate counter-method. From 3D scanning results, three dimensional digital data of rock slope is acquired, and then it is investigated for the engineering properties of discontinuities in rock mass. On the base of the result, we carry out the analysis of slope stability using the methods of the stereographic projection. In particular, the use of a 3D laser scanner is powerful about the slope on which person is difficult to approach because we can obtain the informations of discontinuities from the 3D digital data.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.135-142
• /
• 2000

A framework alternative to that of classical slope stability analysis is developed, wherein the soil mass is treated as a continuum and in situ soil stresses and strengths are computed accurately using inelastic finite element methods with general constitutive models. Within this framework, two alternative methods of stability analysis are presented. In the first, the strength characteristics of the soil mass are held constant, and the gravitational loading on the slope system is increased until failure is initiated by well-defined mechanisms. In the second approach, the gravity loading on the slope system is held constant, while the strength parameters of the slope mass are gradually decreased until well-defined failure mechanisms developed. Details on the applying both of the proposed methods, and comparisons of their characteristics on a number of solved example problems are presented.

• 한국안전학회지
• /
• 제22권3호
• /
• pp.74-80
• /
• 2007

In this study, a documentary survey, face mapping, and stability analysis were performed on the collapsed colluvial soil slope. The purpose of this paper is to identify the cause of slope failure and determine slope stability for similar areas. Boring samples were extracted from the slump and laboratory tests were performed to find out the cause of slope failure. In addition, the limit equilibrium method was used in order to determine the stability of the slope. As a result of this investigation and the analysis of data, the type of collapse and cause of slope failure have been shown to have a strong correlation with the natural geographical and geological features which make up the collapse profile of the study area. These results will help to develop guidelines for formulating countermeasure methods.

• 대한지질공학회:학술대회논문집
• /
• 대한지질공학회 2003년도 정기총회 및 학술발표회
• /
• pp.153-158
• /
• 2003

Traditionally, the statistical methods has been used to analyze the relationship between landslide occurrence and related factors(soil depth, soil strength, slope angle, vegetation, etc.) in GIS technique. However, the method have no mechanical meaning. Therefore, the mechanical model is suggested in this research. The method analyzes the mechanical equilibrium of a potential slide block and then calculates a slope safety factor. Since this method is able to consider the balance of forces applied to the slope and is a more reasonable method for an individual site. In this research, the spatial data is obtained, managed and analyzed using GIS technique, and the infinite slope model is used to evaluate factor of safety and analyze the slope stability.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 가을 학술발표회 논문집
• /
• pp.253-258
• /
• 1994

Recently, computer technique for the analysis of slope stability enable to reduce a considerable time and efforts. And also, stability problems can be approached by using stablility chart which was basically developed to handle the problems under simple conditions only. Most of the conventional slope stability computer programs and stability chart are still based on the general limit equilibrium method. 16 types of sample slopes and 2 types of failure slope were compared and analysed by stability charts and programs. This research work intend to apply 4 types of conventional computer programs based on the same theoretical backgroung and 7 types of stability charts for solving the same stability problems and the results and compared and analysed in order to justify their reliability.

• 대한토목학회논문집
• /
• 제4권3호
• /
• pp.11-18
• /
• 1984

사면의 안정 해석방법은 사면의 제반 조건 및 파괴면의 형태에 따라 유한사면법과 무한 사면법 등으로 나눌수 있는데 무한사면법은 그 해석 방법이 단순 명료하여 사용이 간편한 반면에, 단영향을 무시하고 경사면에 평행한 파괴면을 가정하는 등 대략적인 면이 있어서 그 적용범위에 한계성을 내포하고 있다. 본 논문에서는 무한사면법을 적용하여 공학적으로 허용할 수 있는 범위내의 오차를 주는 사면을 정의하기 위하여 가상사면을 다양하게 설정하고 각 사면에 대한 유한 사면법과 무한 사면법의 안정해석 결과를 안전률을 이용하여 비교 분석하였다. 그 결과로 무한사면법은 무한사면파괴가 예상되는 한계높이에 대한 사면높이의 비가 대략 9보다 같거나 클때 적용 가능하다고 판단되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.434-443
• /
• 2009

Slope stability analysis is an essential part of rock slope design. For highly fractured rock, the limit equilibrium method (LEM) based slope stability analysis with a circular failure surface is often carried out assuming the rock mass behaves more or less as a continuum. This paper examines first, the applicability of the finite-element method (FEM) based shear strength reduction (SSR) technique for highly fractured rock slope, and second the use of Mohr-Coulomb (MC) failure criterion in conjunction with generalized Hoek-Brown (HB) failure criterion. The numerical results on a number of cases are compared in terms of the factor of safety (FS). The results indicated that the FEM-based SSR technique yields almost the same FSs from LEM, and that the MC and HB failure criteria yield almost identical FSs when the strength parameters for MC failure criterion are obtained based on the modified HB failure criterion if and only if value of the Hoek-Brown constant $m_i$ is smaller than 10 and slope angle is smaller than 1:1, otherwise MC failure criteria over-estimate the factor of safety.