• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.725-730
• /
• 2005

In case of the national roads which is opened in the past, there are carried out the expansion and improvement for enlargement of the traffic demand by industrial development and safety road operation to narrow of road width and serious change of the road alignment with effect of topography and graphical features of a mountain. A protection method using vegetation in the cut-slope has been constructed for harmony of ambient environment after cutting the slope recently. But it requires a study because the surface lose and the failure have been occurred in the large cut-slope which is covered by vegetation. In this study it was presented a countermeasure and examined a stability of contained uncertainty in the cut-slope according to the failure example of the cut-slope which is covered by vegetation. The additional research will be necessary against the development of the investigation technique which executes the stability investigation of the cut-slope which is covered by vegetation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.2
• /
• pp.106-113
• /
• 2009

In this study, stability of the new gabion system with vegetation base materials was analysed. New gabion system with vegetation base materials is a new approach which has been developed to achieve lope stabilization and revegetation of forest road cut-slope by making the best use of advantages of gabion systems with vegetation base materials. Results from stability analysis are as follows. For the soil density, the angle of internal friction and unit weight of the rock fill was assumed to be $1.90g/cm^3$, $30^{\circ}$ and $2.30t/m^3$, respectively, the slope stability analysis showed that the new gabion system couldn't require any poles to fix it up, and could keep stable during both rainy and dry seasons. As the results of checks against overturning and sliding, the retaining wall with. the new gabion system could produce suitable factors of safety for overturning and sliding. Vegetation established on the surface of the new gabion systems indirectly can help to increase slope stability by prevention of surface erosion. Consequently, the new gabion system with vegetation base materials could achieve the desired effect on slope stabilization as much as existing gab ion system could do, and could promote rapid establishment of vegetation on cut-slopes.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.2
• /
• pp.74-83
• /
• 2001

The purpose of this study was investigate to the influence of forest roads characteristics and environment factors on the soil erosion, stability and vegetation survival of cut slope in forest roads. The results obtained could be summarized as follows; 1. The correlated factors between slope erosion and variables in cut slope were altitude, convex, degree of slope, length of slope and soil depth. In the stepwise regression analysis, length of slope and soil hardness was a high significant and its regression equation was given by -89.6136 + 15.0667X14 + 16.6713X15($R^2$ = 0.6712). 2. The main factors influencing the stability of cut slope were significant in order of coverage, middle, convex, length of slope and north, and its discriminant equation was given by -1.019 + 0.064X22 - 0.808X8 - 0.622X24 + 0.742X11 - 0.172X14 - 0.545X6 ($R^2$ = 0.793). 3. The centroids value of discriminant function in the stability and unstability estimated to 1.244 and -1.348, respectively. The boundary value between two groups related to slope stability was -0.1038. The prediction rate of discriminant function for stability evaluation of was as high as 91.3%. 4. The dominant species of invasion vegetation on the cut slope consist with Carex humilis, Agropyron tsukushiense var. transiens, Calamagrostis arundinacea, Miscanthus sinensis var. purpurascens, and Ixeris dentata in survey area. The rate of vegetation invasion more increased by time passed. 5. The life form of invasion vegetation in cut slop showed to $H-D_1-R_{2,3}-e$ type of the hemicryptophyte of dormancy form, dissem inated widely by wind and water of dissminule type, moderate extent and narrowest extent of radicoid type, erect form of growth form. 6. The correlated factors between forest enviroment and coverage appeared north, passage years and middle position of slope at 5% level. The forest environment factors influencing the invasion plants in survey area were shown in order to altitude, passage years, rock(none), forest type(mixed) and stone amount. The regression equation was given by 17.5228 - 0.0911X3 + 3.6189X28 15.8493X22 19.8544X25 + 0.3558X26 ($R^2$ = 0.4026).

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.4
• /
• pp.17-31
• /
• 2016

Many researchers have evaluated the influence of vegetation cover on slope stability. However, due to the extensive variety of site conditions and vegetation types, different studies have often provided inconsistent results, especially when evaluating in different regions. Therefore, additional studies need to be conducted to identify the positive impacts of vegetation cover for slope stabilization. This study used the Transient Rainfall Infiltration and Grid-based Regional Slope-stability Model (TRIGRS) to predict the occurrence of landslides in a watershed in Jinbu-Myeon, Pyeongchang-gun, Korea. The influence of vegetation cover was assessed by spatially and temporally comparing the predicted landslides corresponding to multiple trials of cohesion values (which include the role of root cohesion) and real observed landslide scars to back-calculate the contribution of vegetation cover to slope stabilization. The lower bound of cohesion was defined based on the fact that there are no unstable cells in the raster stability map at initial conditions, and the modified success rate was used to evaluate the model performance. In the next step, the most reliable value representing the contribution of vegetation cover in the study area was applied for landslide assessment. The analyzed results showed that the role of vegetation cover could be replaced by increasing the soil cohesion by 3.8 kPa. Without considering the influence of vegetation cover, a large area of the studied watershed is unconditionally unstable in the initial condition. However, when tree root cohesion is taken into account, the model produces more realistic results with about 76.7% of observed unstable cells and 78.6% of observed stable cells being well predicted.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.5
• /
• pp.80-93
• /
• 2000

This study measured the shearing resistance of the roots of the Pinus Koraiensis by the tensile strength gained through their individual tensile test for the Root Reinforcement Model. On the basis of the shearing resistance value calculated through such a process the factor of safety(Fs) was comparatively presented by using the simplified Janbu Method in PCSTABL5M, the slop-analyzing software which had been developed in Purdue University of the U.S.A according to the shape of a slope and the type of soil. The results to have measured a stress and the factor of safety(Fs) by experiment are as follows. 1) The mean root diameter of the Pinus Koraiensis used for this experiment was 2.483mm and the mean tensile stress was calculated as 422.846(kgf/$\textrm{cm}^2$). In the strain ratio of material and the elastic modulus was measured 7.8%, 9,291.92(kgf/$\textrm{cm}^2$). 2) The shearing strength including the resistance of soil and root is expressed as Rt=C+Cr+$\sigma$.tan . ΔCr(kg/$\textrm{cm}^2$) of the shearing resistance calculated by estimating the areal ratio of roots at 10 is 0.253(kgf/$\textrm{cm}^2$). 3) As the result of making an analysis of the natural slope stability by the soil parameter, the factor of safety(Fs) was calculated at 1.795 in CL, and the stability analysis of the root reinforcement slope, Fs was calculated at 1.952. However, since a precise analysis of the controlled factors of the slope analyses are demanded for more accurate dynamic analyses, the future demands a study on this.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.130-137
• /
• 2012

This study has conducted to develop new gabion wall systems with vegetation base materials for stream bank stability and rapid rehabilitation. Vegetation base materials are primarily compounded with fine soil, organic composts and peat moss as plant fibers, a water retainer and a soil improver. Normally gabion wall systems resist the lateral earth pressures or stream power by their own weight. Therefore, fill material must have suitable weight, compressive strength and durability to resist the loading, as well as the effects of water and weathering. In this project, 100 to 200-mm clean, hard stones are basically specified, and about 50-mm rubbles are also used. Test application of new gabion wall system carried out in the stream bank of a small stream in the Gwangreung experimental forest, belonging to Korea Forest Research Institute (KFRI) in December 16th, 2006. As a result of the analysis of hydraulic stability of new gabion wall system, gabion wall system has highest threshold shear stress when the gabion wall covered by vegetation. New gabion wall system is highly resistant to sliding and overturning because safety coefficients exceed 1.5. As a result of term of slope stability analysis of new gabion wall system by Bishop and Fellenius methods, stability of stream bank was highly increased after the construction of gabion wall. Therefore, new gabion wall system is effective to stabilize unstable stream bank.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.3 s.39
• /
• pp.39-56
• /
• 1990

The purpose of this study is to analyze the roadside slope of mountainous Parkway. 48 sites were selected by Random Ranking Sampling. This study was researched on the slope condition with the cause of occurrence, the situation of fundamental engineering works and vegetation on slopes. The main results of this research are summarized as follow ; 1. Slope shapes are shown nine types in cut slope and four types in fill slope. 2. Generally, fill slopes are larger than cut slopes in slop area. 3. Grade is more steep than standard grade. 4. Main engineering works, which constructed for slope stability, are terracing, side-ditch wall, channel, concrete trellis works and wire fence. 5. Roundabout channel were many constructed within the sector of Ukmojeong-Deokdong, but were few constructed within the sector of Banseon-Seongsam pass and Cheoneun Temple-Seongsam pass. 6. Most. of side-ditch wall were constructed of concrete and wet-masonry. 7. In vegetation works, many exterior species were selected. 8. Planting pattern was not combinated with the national park landscape.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.6
• /
• pp.63-76
• /
• 2016

Slope revegetation refers to the use of vegetation and construction to protect a barren slope devastated by road and building construction. Among many revegetation strategies, hydroseeding has been widely utilized to stabilize barren slopes and has become the representative approach. Previous studies on slope stability have been conducted from a civil engineering perspective, mainly evaluating the stability of cut-slopes on solid bedrock and the use of concrete structures to stabilize devastated slopes. This study was conducted to develop a method to evaluate erosion risk of revegetated cut-slopes, based on criteria derived from previous studies. Twenty-five factors were surveyed on both on-the-spot erosion slopes and non-erosion slopes after slope revegetation to compare slope types. The scores of all non-erosion slopes exceed 80 score while erosion slopes are 80 below. Erosion slopes got the range of 68-74 score while non-erosion slopes got the range of 81-100 score in the first result which was not applied for weighted-values. The scores of all non-erosion slopes exceeded 3.10, while erosion slopes were below 3.10. Erosion slopes were in the range of 2.73-3.09, while non-erosion slopes were in the range of 3.15-3.90 in the second result, which was applied with weighted-values according to the AHP result from a previous study.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.117-126
• /
• 2021

An experimental study was carried out to investigate the applicability of cement-based materials for green soil which is a soil for promoting plant growth. The results show that the shear strength of the green soil mixed with gypsum cement (No.3) was low, but the hardness (23.6mm) and pH value (7.4) was most suitable for the vegetation environment. In addition, the initial vegetation germination of green soil, which improved performance by adding a moisturizer, was slower than that of general green soil, and the conductivity value tended to be slightly higher. On the other hand, the slope adhesion of advanced green soil was high, and it was found that the plant growth rate and the regeneration capacity were superior after time passed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.1
• /
• pp.207-215
• /
• 2003

Developed is a new environment-friendly concrete-block retaining wall system. The conventional analysis methods are not directly applicable because the proposed concrete-block wall system is made of by interlocking the blocks with shear keys. Therefore, the shear analysis as well as stability analysis have been conducted to secure the safety of block-wall system. Overall slope stability analysis was also performed. An appropriate strengthening method was developed to ensure the safety when the block-wall system is relatively high. The method of analysis for strengthening the concrete-block wall system was also proposed. The proposed environment-friendly concrete block retaining wall system shows reasonable safety and can be a good construction method for retaining walls and river bank walls.