• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.1
• /
• pp.161-173
• /
• 1999

This study was performed to compare the bone mineral densities measured at mandibular premolar area by copper-equivalent image and hydroxyapatite phantom with those measured at radius by dual energy absorptiometry and to evaluate the clinical usefulness of Digital system with slide scanner, copper-equivalent image, and hydroxyapatite phantom. For experiment. intraoral radiograms of 15 normal subjects ranged from 20 years old to 67 old were taken with copper-step wedge at mandibular premolar area and bone mineral densities calculated by conversion equation to bone mineral density of hydroxyapatite were compared with those measured at radius distal 1/3 area by Hologic QDR-1000. Obtained results as follows: 1) The conversion equation was Y=5.97X-0.25 and its determination coefficient was 0.9967. The coefficient of variation in the measurement of copper-equivalent value ranged from 4％ to 8％ and showed high reproducibility. 2) The coefficient of variation in the measurement of bone mineral density by the equation ranged from 7％ to 8％ and showed high reproducibility. 3) The bone mineral densities ranged from 0.35 to 0.79g/cm2 at mandibular premolararea. 4) The correlation coefficient between bone mineral densities at mandibular premolar area and those at radius distal 1/3 area was 0.8965. As summary, digital image analyzing system using copper-equivalent image and hydroxyapatite phantom appeared to be clinically useful to measure the bone mineral density at dental area.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.4
• /
• pp.466-476
• /
• 2006

Purpose : Colonization of denture soft lining materials by Candida albicans can result in clinical problem, and deterioration of the materials. This study aimed to compare the retention and penetration of C. albicans into four denture soft lining materials commonly used. Materials and methods : Four denture soft lining materials (Coe-comfort$^{(R)}$, Coe-soft$^{(R)}$, GC soft liner$^{(R)}$, and Tissue conditioner$^{(R)}$) discs were prepared to glass slide and dental stone. Adherence of yeast to surfaces was monitored after one hour incubation of standardized washed cell suspension with test disc surfaces. Adherent cells stained with acridine orange were counted fluorescence microscopy. Penetration of yeast into materials bonded with acrylic resin after 1, 2, 3,4, 5, 6 and 7 days incubation was observed through sections stained using acridine orange and estimated to quantitative analysis using radioisotope. Results : There was statistical significance in cell numbers between smooth and rough surfaces(p<0.05). Higher numbers of cells were observed on rough surfaces. There was statistical significance in adherent cell numbers into smooth and rough surfaces individually(p<0.05). According to the increase of incubation periods, the cells penetrated into denture soft lining materials were shown to increase. The differences among all kinds of soft liner were statistically significant(p<0.05),and the largest number of cells penetrated into soft liners was observed in the Coe-soft$^{(R)}$. Conclusion : Initial adherence and penetration of yeast into denture soft lining materials has been influenced by surface roughness and chemical composition of them. The selection of appropriate materials and their fabrication may promote clinical performance.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.165-177
• /
• 1994

To investigate the depth of the root concavity and root surface area of the maxillary first premolar, 40 maxillary first premolars were used. All the teeth which extracted because of advanced periodontal disease and orthodontic treatment procedure, were sectioned every 1.5mm from cementoenameljunction to the apex with hard tissue microtome. Each sectioned root was taken photograph with slide film, and projected for measuring with a calibrated digital Curvi-Meter. The root surface area, percentage of the RSA and the linear variation of the RSA were calibrated for each 1.5mm section. Linear variation of the depth of root concavity was measured on mesial and distal root surface for each section using computer-aided digitizer. The results were as follows. 1. The total mean root length of maxillary first premolar was 13.48mm. Mean buccal root length of 2-rooted tooth was 12.59mm, mean palatal root length was 12.73mm, and mean root length of single rooted tooth was 13.78mm. 2. The total mean root surface area of maxillary first premolar was $194.17mm^2$, mean root surface area for 2-rooted tooth was $205.97mm^2$ and mean root surface area for single rooted tooth was $188.49mm^2$. 3. It was 59.93% of the total root surface area that the area from CEJ to coronal 6mm. And, the coronal half of the root length accounted for approximately 71.76% of the total root surface area. 4. Most deepest concavity of the mesial root surface was 0.65mm at apical 3.0mm, 4.5mm level in maxillary first premolar. And, that of the distal root surface was 0.37mm at apical 4.5mm level. 5. All of the maxillary first premolar had mesial root surface concavity. This mesial root surface concavity appeared to be more pronounced in 2-rooted tooth than single rooted tooth.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11b
• /
• pp.27-32
• /
• 2004

Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films. MDC flowing across monolayers is analyzed using a rod-like molecular model. A method for determining the dielectric relaxation time ${\tau}$ of floating 'monolayers on the water surface is presented. MDC floing across monolayers is analyzed using a rod-like molecular model. It is revealed that the dielectric relaxation time ${\tau}$ of monolayers in the isotropic polar orientational phase is determined using a liner relationship between the monolayer compression speed a and the molecular area Am. Compression speed a was about 30,40,50mm/min. LB layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film.The physicochemical properties of the LB films were examined by UV absorption spectrum, SEM and AFM. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 3~9. Also, we then examined of the MIM device by means of I-V characteristic of the device is measured from -3 to +3[V]. The insulation property of a thin film is better as the distance between electrodes is larger.

• Korean journal of applied entomology
• /
• v.23 no.1 s.58
• /
• pp.61-67
• /
• 1984

Conidial germination of Septoria glycines Hemmi, brown spot fungus of soybean, was studied by slide germination test. Poor conidial germination of S. glycines was observed on sterile distilled water, but potato dextrose agar(PDA) and distilled water floated with soybean leaf disc furnished a satisfactory medium for conidial germination. Exogenous supply of carbon source was essential for conidial germination, while phosphorous and potassium were not evident as that for carbon. Soluble starch was the most suitable as a carbon source for conidial germination and followed by D-glucose, D-galactose and lactose in that order. Maximum germination was attained in the $5\times10^{-2}mol$. concentration of glucose. Germination was decreased with increment of conidial concentration and was almost completely suppressed in the density of 10,000 conidia per $mm^2$. It suggested existing a self-inhibitor(s). Non-washed conidia germinated more than washed conidia and this was obvious when the conidia density was over $2\times10^3$ conidia per $mm^2$ on the dry agar block.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.700-706
• /
• 2009

Unlike high-speed KTX trains and dual track railways, most single-track railways are not popular among passengers because of long travel hours. As a solution to the problem, tilting trains will be deployed along the conventional line. Tilting train has a mechanism that enables increased speed on regular and curved railway tracks. As a train rounds a curve at speed, objects inside the train experience centrifugal force. This can cause packages to slide about or seated passengers to feel squashed by the outboard armrest due to its centripetal force, and standing passengers to lose their balance. Tilting trains possess a top speed of up to 180 km per hour as opposed to the previous 140 km per hour, so allow the train to pass curve at higher speed without affecting passenger comfort. This paper describes the methodology study to estimate the benefits, especially on the extra benefits in case of tilting actuation.

• Mycobiology
• /
• v.30 no.1
• /
• pp.51-54
• /
• 2002

This paper deals with the study on comparative efficacy and in vitro activity of cow urine and cow dung for controlling root rot disease of cucumber caused by Fusarium solani f. sp. cucurbitae Snyder & Hansen following slide germination and mycelial growth inhibition tests. Results showed that both germination of conidia and the percentage inhibition of mycelial growth decreased or suppressed and varied greatly with respect to different hour and days of incubation and kind of bio-matters. In between two bio-matters cow urine was found more effective than that of cow dung in conidial germination. No germination of conidia was recorded after one hour of incubation in any medium whereas in cow urine germination of conidia was not also observed even after 2 hours of incubation. After 7 hours of incubation out of 200 conidia of F. solani f. sp. cucurbitae, 28 in cow urine and 64 in cow dung were germinated while in control a total germinated conidia was 185. In case of percentage inhibition of conidial germination the highest percentage(100%) was recorded in cow urine after 2 hours of incubation followed by 3 hours(96.0%), 4 hours(91.0%) and 6 hours(89.4%). During the test on inhibition of mycelial growth, the highest percentage(62.8%) was recorded in cow urine potato dextrose agar(CUPDA) medium tested after 4 days of incubation, followed by 3 days(60.5%), 5 days(56.5%) and 2 days(55.0%). In this test cow dung potato dextrose agar(CDPDA) had less efficacy in suppression of the percentage inhibition of mycelial growth.

• Computational Structural Engineering
• /
• v.2 no.4
• /
• pp.59-67
• /
• 1989

Effect of joints which pre-exist in the rock mass on the behavior of underground structures is studied. A finite element program is developed using a constitutive mode for rock masses exhibiting nonlinear anisotropic behavior. The initial loading scheme combined with reduced region of analysis is employed to minimize the problem size. A circular tunnel within rock mass is analyzed and the results are compared with those of elasto-plastic analysis to verify that the program is reasonable. The effect of joint direction is also analyzed in regard to stress relaxation, displacement, and deformation shape. It is concluded that the joint direction has significant influence on the nonlinear behavior of rock masses such that the vicinity of tunnel perpendicular to the direction of the joints is stressed to slide. It is also observed that the circular shape deforms to an elliptical shape with a major axis in the joint direction.

• The Korean Journal of Mycology
• /
• v.6 no.1
• /
• pp.21-27
• /
• 1978

The growing behavior of Candida albicans in various concentration of glucose and corticosteroid media was studied with the method of modified hanging slide culture. The strains of Candida albicans used in this study were obtained from vaginal swab from outpatients and were isolated from cultured colonies on Sabouraud's glucose agar media. To detect the budding rate of blastospore, the diluted suspension of Candida albicans in normal saline were inoculated into various concentration of glucose (Gl, G2, G3, G4), corticosteroid (S1, S2, S3, S4) and corticosteroid with 10% pepton broth (D1, D2, D3, D4) respectively and cultured at room temperature $(22{\sim}25^{\circ}C)$. The number of budding of blastospore were counted under the high power field of light microscope (400X) at specific time interval, e.g, 1, 2, 3, 6, 9, 12, 18, and 24 hours after inoculation. The results are as following: 1. The most effective budding rate was seen in G4 media (1.25% glucose) in 18 hours aft inoculation (89%). 2. The budding rate in Sabouraud's glucose broth with various concentration of dexamethasone added, was not significantly different from that of simple Sabouraud's glucose broth within 18 hours after inoculation, but there was statistically. significant difference in two budding rate at 24 hours observation. 3. The budding rate in 10% pepton broth media with various concentration of dexamethasone was almost same budding rate in control group, which is normal saline and 10% pepton broth, except on 2 and 24 hours results.

• Korean Journal of Veterinary Service
• /
• v.34 no.2
• /
• pp.159-166
• /
• 2011

This study was carried out to develope enzyme-linked immunosorbent assay (ELISA) for detection of canine brucellosis in dogs experimentally inoculated with Brucella abortus 1119-3 and B. canis RM666. Groups A, B and C of dogs (each group consisting of three dogs) were orally inoculated with approximately $5{\times}10^9$ colony-forming units of B. abortus and B. canis, and with sterile pyrogen-free PBS, respectively. The animals were monitored at regular intervals upto the 12th week post inoculation (PI) by standard tube agglutination test (STAT), plate agglutination test (PAT), Rose Bengal test (RBT), 2-mercaptoethanol rapid slide agglutination test (2ME-RSAT) and ELISA. The induced antibody titers in group A dogs were detected from the first week PI to the eighth week PI in STAT, PAT and RBT using the inactivated whole cells of B. abortus 1119-3 as antigens, while no sera in groups B and C dogs reacted with the antigens. In 2ME-RSAT using whole cells of B. canis M-strain as antigens, the induced antibody titers in group B dogs were observed at the second week PI and persisted for the 12th week PI, while sera of groups A and C dogs did not react with the whole cells. In ELISA using cytoplasmic fractions antigen of B. abortus 1119-3, the mean optical density of antibodies in groups A and B was detected from the first and second weeks PI, respectively, and persisted for 12th week PI, while sera of group C did not cross-react with the fractions antigen. However, in ELISA using the hot saline extracts of B. canis M- as an antigen, the induced antibody titers in only group B dogs were detected from second week PI and persisted for until the end of this study. These results indicate that the ELISA using B. abortus 1119-3 cytoplasmic fractions as antigens can be a good candidate for detection of brucellosis by B. abortus as well as B. canis in dogs.