• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.157-164
• /
• 2017

A parallel slide gate valve (PSGV) is located between the heat recovery steam generator (HRSG) and the steam turbine in a combined cycle power plant (CCPP). It is used to control the flow of steam and runs with repetitive operations such as startups, load changes, and shutdowns during its operation period. Therefore, it is necessary to evaluate the fatigue damage and the structural integrity under a large compressive thermal stress due to the temperature difference through the valve wall thickness during the startup operations. In this paper, the thermal-structural analysis and the fatigue life evaluation of a 16-inch PSGV, which is installed on the HP steam line, is performed according to the fatigue life assessment method described in the ASME B&PVC VIII-2; the method uses the equivalent stress from the elastic stress analysis.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.129-135
• /
• 2016

In this paper, we propose a novel tracking algorithm called slide window tracker (SWT) suitable for maneuvering target. To efficiently estimate trajectory of moving target, we adopt a sliding piecewise linear window which includes past trace information. By adjusting the window parameters, the proposed algorithm is to reduce measurement noise and to track fast maneuvering target with little computational increment as compared to ${\alpha}-{\beta}$ tracker. Throughout the computer simulations, we verify outstanding tracking performance of the SWT algorithm in noisy linear and nonlinear trajectories. Also, we show that the SWT algorithm is not sensitive to initial model parameter selection, which gives large degree of freedom in applying the SWT algorithm to unknown time-varying measurement environments.

• Archives of design research
• /
• v.14 no.3
• /
• pp.27-36
• /
• 2001

Minor enterprises can successfully build up their market share plans in a relatively shorter time than compared with major enterprises, which require long time for design developments in their big organization. Therefore, there are some items that are more suitable to the minor enterprises. For example, computer desk may be the one. It must be one of the strategically suitable items of minor enterprises rather than of large enterprises because of their own easy production policies. This paper is based on a research report that I submitted to Gyongsan-Si, Gyongbuk-Do which supported a small company for a special purpose of its provincial economic policy. I took part in the research and suggested five types of characteristic concepts and the ideas. And as a result. the type war accepted as the most appropriate one of them to produce. And the acception was based on the following five factors; consumer's need, productivity, proper price, energy saving, and user' easiness.

• Journal of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.102-109
• /
• 1987

Some characteristics of $SnO_2$ film which was deposited on a slide glass substrate, using dibutyl tin diacetate and oxygen, by the chemical vapor deposition were observed. The optimum condition for the preparation of the film was found to be at 420$^{\circ}C$ of substrate temperature for 20 min of deposition. Important optical, electrical, and structural features of the film were examined. It was found that the typical $SnO_2$ film on the untreated substrate was 4000${\AA}$ in thickness, transmitted 90% of the visible liglit, and provided 5800 ohms/${\square}$ of the sheet resistance. It was also found that the surface treatments of the slide glass by acid leaching were beneficial. The film structure was found to be a mixture of polycrystalline tetragonal stannic oxide confirmed by the X-ray diffraction and to be spherical fine grains concluded by the scanning electron microscopy.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.15 no.1
• /
• pp.32-40
• /
• 2009

Purpose: The purposes of this study were to determine the intertester and intratester reliabilities of the Lateral Scapular Slide Test (LSST) method, and to examine if significant differences existed in scapular positions among the pain groups (right-shoulder pain group, left-shoulder, pain group and both-shoulders pain group). 27 female subjects (mean age = 51.6, mean height = 157.7 cm, mean weight = 57.5 kg) with shoulder pain were recruited for this study. Methods: The bilateral distances between the root of the scapular spine and T3/4 (RSS), and between the inferior scapular angle and T7/8 (IA), were recorded. Subjects were tested at three positions: the with arms with abducted at 0, 45 and 90 degrees in the coronal plane. The LSST measurements were performed by two testers, selected randomly. Results: The results were as follows: Intraclass correlation coefficients (ICCs) for the intertester reliability were excellent (ICC 0.78-0.94). And the ICCs for the intratester reliability were excellent (ICC 0.83-0.99). In the right-shoulder and both-shoulders pain groups, the right-side RSS and IA values of right side were significantly greater than of the left-side RSS values left side for the arms abducted at 0 degrees of right shoulder pain group and both shoulder pain group (p<.05). However, the side-to-side difference was less than 1.5 cm. Conclusion: Our results suggest that the LSST is highly reliable in identifying the abnormal scapular position of patients with shoulder problems. Future research should be continued to clarify the clinical usefulness of this method.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.264-269
• /
• 2012

Die slide injection marvelously reduces the cost and time in processing plastic products because they can simplify the conventional process through eliminating additional process. However, this process must resolve some defects like whitening, resin infiltration, blowhole, resin overflow, etc. In this study, the process parameters of the injection molding are optimized by using the finite element method and Taguchi method. The injection molding analysis is simulated by employing the Moldflow insight 2010 code and the 2nd injection is by adopting the Multi-stage injection code. The process parameters are optimized by using the $L_{16}$ orthogonal array and smaller-the-better characteristics of the Taguchi method that was used to produce an airtight container (coolant reservoir tank) from polypropylene (PP) plastic material.rodanwhile, the optimum values are confirmed to be similar in 95% confidence and 5% significance level through analysis of variance (ANOVA). rooreover, new products and old products were compared by mdasuring the dimensional accuracy, resulting in the improvement of dimensional stability more than 5%.

• Structural Engineering and Mechanics
• /
• v.32 no.2
• /
• pp.251-267
• /
• 2009

Reinforced concrete (RC) structures consist of two different materials: concrete and steel bar. The stress transfer behaviour between the two materials through bond plays an important role in the load-carrying capacity of RC structures, especially when they subject to lateral load such as blast and seismic load. Therefore, bond and slip between concrete and reinforcement bar will affect the response of RC structures under such loads. However, in most numerical analyses of blast-induced structural responses, the perfect bond between concrete and steel bar is often assumed. The main reason is that it is very difficult to model bond slip in the commercial finite element software, especially in hydrodynamic codes. In the present study, a one-dimensional slide line contact model in LS-DYNA for modeling sliding of rebar along a string of concrete nodes is creatively used to model the bond slip between concrete and steel bars in RC structures. In order to model the bond slip accurately, a new approach to define the parameters of the one-dimensional slide line model from common pullout test data is proposed. Reliability and accuracy of the proposed approach and the one-dimensional slide line in modelling the bond slip between concrete and steel bar are demonstrated through comparison of numerical results and experimental data. A case study is then carried out to investigate the bond slip effect on numerical analysis of blast-induced responses of a RC column. Parametric studies are also conducted to investigate the effect of bond shear modulus, maximum elastic slip strain, and damage curve exponential coefficient on blast-induced response of RC columns. Finally, recommendations are given for modelling the bond slip in numerical analysis of blast-induced responses of RC columns.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.521-533
• /
• 2010

The OSGi framework is a java-based service platform that can be remotely managed, providing an application life cycle management model, a service registry and an execution environment. Based on the framework, various OSGi layers, APIs, and services have been defined. A bundle is an application that can be executed in the OSGi framework, deployed through a bundle repository. Usually, bundles in the repository are accessible via a designated web page. Unfortunately, the current bundle repositories do not provide any kind of group access services and dynamic bundle installation and deployment. In this paper, we describe a WebDAV-Based OSGi bundle repository named WOBR, which supports effective group-based accesses. WOBR is composed of a WOBR bundle repository, a management bundle and an access bundle that interact with the bundle repository. The management bundle is for configuration of the WOBR bundle repository, managing group access facility to the repository. The access bundle provides access to the repository and search mechanism for the bundles. Additionally, it provides the life cycle management of the installed bundles on the local environment.

• Journal of Nutrition and Health
• /
• v.35 no.10
• /
• pp.1053-1059
• /
• 2002

In post-genome period, the technique for identifying gene expression has been changed to high throughput screening. In the field of molecular nutrition, the need for this technique to clarify molecular function of the specific nutrient is essential. In this study, we have tested the zinc-regulated gene expression in zinc-deficient U937 cells, using cDNA microarray which is the cutting-edge technique to screen large numbers of gene expression simultaneously. The study result can be used for the preliminary gene screening data for clarifying, using monocyte U937 cell line, molecular Zn aspect in atherosclerosis. U937 cells were cultured in Zn-adequate (control, 12 $\mu$M Zn) or Zn-deficient (experimental, 0 $\mu$M Zn) ESMI media during 2 days, respectively. Cells were harvested and RNA was extracted. Total RNA was reverse-transcriptinized and synthesized cDNA probe labeled with Cy-3. fluorescent labeled cDNA probe was applied to microarray slide for hybridization slide, and after then, the slide was scanned using fluorescence scanner. ‘Highly expressed genes’ in Zn-deficient U937 cells, comparing to Zn-adequate group, are mainly about the genes for motility protein, immune system protein, oncogene and tumor suppressor and ‘Less highly expressed genes’ are about the genes for transcription, apoptosis associated protein, cell cycle, and several basic transcription factors. The results of this preliminary study imply the effectiveness of cDNA microarray for expression profiling of a singly nutrient deficiency, specially Zn. Furthur study, using tailored-cDNA array and capillary endothelial cell lines, would be beneficial to clarify molecular Zn function, more in detail.

• Smart Structures and Systems
• /
• v.24 no.6
• /
• pp.793-802
• /
• 2019

The centrifuge model test is usually used for two-dimensional deformation and instability study of the soil slopes. As a typical loose slope, the municipal solid waste (MSW) landfill is easy to slide with large deformation, under high water levels or large earthquakes. A series of centrifuge model tests of landfill slide induced by rising water level and earthquake were carried out. The particle image velocimetry (PIV), laser displacement transducer (LDT) and marker tracer (MT) methods were used to measure the deformation of the landfill under different centrifugal accelerations, water levels and earthquake magnitudes. The PIV method realized the observation of continuous deformation of the landfill model, and its results were consistent with those by LDT, which had higher precision than the MT method. The deformation of the landfill was mainly vertically downward and increased linearly with the rising centrifugal acceleration. When the water level rose, the horizontal deformation of the landfill developed gradually due to the seepage, and a global slide surface formed when the critical water level was reached. The seismic deformation of the landfill was mainly vertical at a low water level, but significant horizontal deformation occurred under a high water level. The results of the tests and analyses verified the applicability of PIV in the two-dimensional deformation measurement in the centrifuge model tests of the MSW landfill, and provide an important basis for revealing the instability mechanism of landfills under extreme hydraulic and seismic conditions.