• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.9
• /
• pp.63-69
• /
• 1998

In this paper, we propose a new Bit-Rate control algorithm based on bit usage matching to substitute encoded GOP(s) for new GOP(s) in MPEG-2 bitstream. It iteratively encodes current picture according to quantization value of previous picture and records bit-usage of each slice until nearly target bits are used. With target bits falling in two output bits, quantization value of slice should be changed to alleviate output bit error. We use recorded bit-usage information to decide which slices should be encoded with one quantization value and others with another. As every macroblock has different activity, we change macroblock quantization value using slice quantization value and activity value. The simulation results demonstrate that the fluctuation of the output bits can be kept within few-several tens of bits while maintaining the quality of the reconstructed pictures at a relatively stable level.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.2
• /
• pp.85-89
• /
• 2011

PURPOSE. The purpose of this study was to evaluate the amount of resorption and thickness of labial bone in anterior maxillary implant using cone beam computed tomography with Hitachi CB Mercuray (Hitachi, Medico, Tokyo, Japan). MATERIALS AND METHODS. Twenty-one patients with 26 implants were followed-up and checked with CBCT. 21 OSSEOTITE $NT^{(R)}$. (3i/implant Innovations, Florida, USA) and 5 $OSSEOTITE^{(R)}$. implants (3i/implant Innovations, Florida, USA) were placed at anterior region and they were positioned vertically at the same level of bony scallop of adjacent teeth. Whenever there was no lesion or labial bone was intact, immediate placement was tried as possible as it could be. Generated bone regeneration was done in the patients with the deficiency of hard tissue using $Bio-Oss^{(R)}$. (Geistlich, Wolhusen, Switzerland) and $Bio-Gide^{(R)}$. (Geistlich, Wolhusen, Switzerland). Second surgery was done in 6 months after implant placement and provisionalization was done for 3 months. Definite abutment was made of titanium abutment with porcelain, gold and zirconia, and was attached after provisionalization. Two-dimensional slices were created to produce sagittal, coronal, axial and 3D by using OnDemand3D (Cybermed, Seoul, Korea). RESULTS. The mean value of bone resorption (distance from top of implant to labial bone) was $1.32 \;{\pm}\; 0.86\; mm$ and the mean thickness of labial bone was $1.91 \;{\pm}\; 0.45 \;mm$. CONCLUSION. It is suggested that the thickness more than 1.91 mm could reduce the amount and incidence of resorption of labial bone in maxillary anterior implant.

• Archives of Craniofacial Surgery
• /
• v.21 no.4
• /
• pp.225-228
• /
• 2020

Background: The aim of this study is to develop a two-stage training module using radish and swine scapular cartilage for carving ear cartilage. Methods: In the first stage, white radish was cut in 3-6 mm thick slices. The ear cartilage framework was carved using a graver and the helix and antihelix were fixed with pins. In the second stage, swine scapular cartilage was obtained. The thickness varied 3-6 mm. The ear cartilage framework was made. And triangular fossa and scaphoid fossa were carved with graver. A curvilinear cartilage for helix was assembled to the framework by pin fixing. Six participants were recruited for an ear reconstruction training workshop and figures of the cartilage framework were provided. Participants were asked answer the pre-workshop questionnaire and post-workshop questionnaire on a Likert scale to rate their satisfaction with the outcome. Results: On the pre-workshop questionnaire, participants indicated that they did not have sufficient knowledge and skill for fabricating the ear cartilage framework (1.5±0.5 using white radish; 1.3±0.5 using swine scapular cartilage). On the post-workshop questionnaire, participants responded that they had learned useful knowledge from this workshop, reflecting a significant improvement (3.8±1.0 using white radish; 4.0±1.1 using swine scapular cartilage). They also indicated that they had become somewhat confident in this skill (4.2±0.8 using white radish; 4.3±0.5 using swine scapular cartilage. The participants generally found the workshop satisfactory (practically helpful, 4.7±0.5; knowledge improved, 4.8±0.4; satisfied with course, 4.5±0.5; would recommend to others, 4.8±0.4). Conclusion: This model can be useful for ear reconstruction training for medical personnel.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.1
• /
• pp.5-12
• /
• 2002

The effects of ground water level, shear strength parameters of refuse, and geological condition of ground on the slope stability of uncontrolled waste landfill were studied. The Janbu method of slices based on the limit equilibrium method was used to calculate the minimum factor of safety with respect to slope stability of landfill. The analytical results showed that the factor of safety for a fully dried condition of landfill increased 2.4~2.8 times as great as that for a fully saturated condition of landfill. Under the condition of actual ground water level, the factor of safety linearly increased with increasing both cohesion and internal friction angle of refuse. Also, when the potential failure surface passed through the underlying layer, the factor of safety and shape of potential failure surface were found to depend on geological conditions of underlying layer.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.1 no.1
• /
• pp.1-8
• /
• 2005

Aquifer Thermal Energy Storage (ATES) can be a cost-effective and renewable geothermal energy source, depending on site-specific and thermohydraulic conditions. To design an effective ATES system having the effect of groundwater movement, understanding of thermohydraulic processes is necessary. The heat transfer phenomena for an aquifer heat storage are simulated by using FEFLOW with the scenario of heat pump operation with pumping and waste water reinjection in a two layered confined aquifer model. Temperature distribution of the aquifer model is generated, and hydraulic heads and temperature variations are monitored at the both wells during 365 days. The average groundwater velocities are determined with two hydraulic gradient sets according to boundary conditions, and the effect of groundwater flow are shown at the generated thermal distributions of three different depth slices. The generated temperature contour lines at the hydraulic gradient of 0.001 are shaped circular, and the center is moved less than 5 m to the direction of groundwater flow in 365 days simulation period. However at the hydraulic gradient of 0.01, the contour center of the temperature are moved to the end of east boundary at each slice and the largest movement is at bottom slice. By the analysis of thermal interference data between two wells the efficiency of the heat pump system model is validated, and the variation of heads is monitored at injection, pumping and no operation mode.

• Journal of Acupuncture Research
• /
• v.22 no.5
• /
• pp.151-160
• /
• 2005

Objectives : This study was undertaken to examine whether Juglandis Semen herbal acupuncture (JGA) exerts protective effect against oxidant-induced cell injury in rabbit liver. Methods : The cell damage was estimated by measuring lactate dehydrogenase (LDH) release, and lipid peroxidation was estimated by measuring malondialdehyde (MDA) in rabbit liver slices. Results : t-Butylhydroperoxide (tBHP) caused an increase in LDH release and lipid peroxidation in a dose-dependent manner over concentrations of 0.5-2 mM, which were prevented by addition of 0.05% JGA. The protective effect of JGA was dose-dependent in concentration range of 0.005 to 0.1%. The concentrations of 0.005 and 0.1% JGA completely prevented the LDH release and lipid peroxidation by 1 mM tBHP. When liver tissues were exposed to 1 mM tBHP, alanine aminotransferase (ALT) activity in the medium was significantly increased, which was prevented by 0.05% JGA. tBHP (2 mM) decreased GSH content and the effect was prevented by 0.05% JGA. Conclusion : These results suggest that JGA exerts protective effect against oxidant-induced cell injury by antioxidant action resulting from enhancement of GSH content in the liver.

• International Journal of Oral Biology
• /
• v.38 no.1
• /
• pp.5-12
• /
• 2013

Recent studies indicate that reactive oxygen species (ROS) can act as modulators of neuronal activity, and are critically involved in persistent pain primarily through spinal mechanisms. In this study, we investigated the effects of NaOCl, a ROS donor, on neuronal excitability and the intracellular calcium concentration ($[Ca^{2+}]_i$) in spinal substantia gelatinosa (SG) neurons. In current clamp conditions, the application of NaOCl caused a membrane depolarization, which was inhibited by pretreatment with phenyl-N-tert-buthylnitrone (PBN), a ROS scavenger. The NaOCl-induced depolarization was not blocked however by pretreatment with dithiothreitol, a sulfhydryl-reducing agent. Confocal scanning laser microscopy was used to confirm whether NaOCl increases the intracellular ROS level. ROS-induced fluorescence intensity was found to be increased during perfusion of NaOCl after the loading of 2',7'-dichlorofluorescin diacetate ($H_2DCF$-DA). NaOCl-induced depolarization was not blocked by pretreatment with external $Ca^{2+}$ free solution or by the addition of nifedifine. However, when slices were pretreated with the $Ca^{2+}$ ATPase inhibitor thapsigargin, NaOCl failed to induce membrane depolarization. In a calcium imaging technique using the $Ca^{2+}$-sensitive fluorescence dye fura-2, the $[Ca^{2+}]_i$ was found to be increased by NaOCl. These results indicate that NaOCl activates the excitability of SG neurons via the modulation of the intracellular calcium concentration, and suggest that ROS induces nociception through a central sensitization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1C
• /
• pp.72-82
• /
• 2004

This paper proposes more robust error concealment techniques (ECTs) for MPEG-2 intra coded frame. MPEG-2 source coding algorithm is very sensitive to transmission errors due to the use of variable-length coding. The transmission errors are corrected by error correction scheme, however, they cannot be revised properly. Error concealment (EC) is used to conceal the errors which are not corrected by error correction and to provide minimum visual distortion at the decoder. If errors are generated in intra coded frame, that is the starting frame of GOP, they are propagated to other inter coded frames due to the nature of motion compensated prediction coding. Such propagation of error may cause severe visual distortion. The proposed algorithm in this paper utilizes the spatio-temporal information of neighboring inter coded frames to conceal the successive slices errors occurred in I-frame. The proposed method also overcomes the problems that previous ECTs reside. The proposed algorithm generates consistent performance even in network where the violent transmission errors frequently occur. Algorithm is performed in MPEG-2 video codec and we can confirm that the proposed algorithm provides less visible distortion and higher PSNR than other approaches through simulations.

• Journal of the Korea Computer Graphics Society
• /
• v.13 no.4
• /
• pp.21-27
• /
• 2007

The 3D Delaunay triangulation is the most widely used method for the mesh creation via the triangulation of a 3D point cloud. However, the method involves a heavy computational cost and, hence, in many interactive applications, it is not appropriate for surface triangulation. In this paper, we propose an efficient triangulation method to create a surface mesh from a 3D point cloud. We divide a set of object points into multiple subsets and apply the 2D Delaunay triangulation to each subset. A given 3D point cloud is cut into slices with respect to the OBB(Oriented Bounding Box) of the point set. The 2D Delaunay triangulation is applied to each subset producing a partial triangulation. The sum of the partial triangulations constitutes the global mesh. As a postprocessing process, we eliminate false edges introduced in the split steps of the triangulation and improve the results. The proposed method can be effectively applied to various image-based modeling applications.

• The Journal of the Korean bone and joint tumor society
• /
• v.9 no.2
• /
• pp.212-216
• /
• 2003

A Common peroneal nerve palsy caused by ganglionic cyst is very rare condition but well recognised entities. There have been three previous reports describing the magnetic resonance image (MRI) findings of peroneal nerve entrapment due to a ganglionic cyst. Ultrasonography, MRI, and electromyography (EMG), nerve conduction velocity (NCV), and microscopic examination were taken for diagnosis. A tubular structure near the fibular neck extending longitudinally over several slices with an inferior extension towards the superior tibiofibular joint with high T2 signal intensity was characteristic. The peroneal nerve was exposed and the ganglionic cyst was excised. The nerve was paralysed immediately after operation, but at 4 month after operation, started recovery of the function gradually and has recovered completely at 7 month. MRI is helpful to detect the extent, location, and origin of the cyst. Meticulous surgical excision can provide favorable result.